Applied Physics Express

Sensitive phonon detection using a single Cooper-pair transistor

Jutarat Tanarom, Takuma Watanabe, Yoshinao Mizugaki, Hiroshi Shimada

Published Apr 21, 2022• 4 citations

Abstract

Abstract We demonstrate that the supercurrent branch of a single Cooper-pair transistor (SCPT) can be used for sensitive phonon detection. We built a theoretical model of phonon detection based on quasiparticle poisoning and demonstrated its operation with an SCPT and a superconducting quantum interference device as a phonon source both composed of mesoscopic Al/AlO x /Al junctions. The sensitivity of the SCPT detector turned out to be approximately 103 times as high as that of the traditional superconducting-tunnel-junction detector.

DOI: 10.35848/1882-0786/ac6930

Related papers

Using Quasiparticle Poisoning To Detect Photons

P. M. Echternach, Peter K. Day

According to a proposal, a phenomenon associated with excitation of quasiparticles in certain superconducting quantum devices would be exploited as a means of detecting photons with exquisite sensitivity. The phenomenon could also be exploited to perform medium-resolution spectroscopy. The proposal was inspired by the observation that Coulomb blockade devices upon which some quantum logic gates are based are extremely sensitive to quasiparticles excited above the superconducting gaps in their leads. The presence of quasiparticles in the leads can be easily detected via the charge states. If quasiparticles could be generated in the leads by absorption of photons, then the devices could be used as very sensitive detectors of electromagnetic radiation over the spectral range from x-rays to submillimeter waves. The devices in question are single-Cooper-pair boxes (SCBs), which are mesoscopic superconducting devices developed for quantum computing. An SCB consists of a small superconducting island connected to a reservoir via a small tunnel junction and connected to a voltage source through a gate capacitor. An SCB is an artificial two-level quantum system, the Hamiltonian of which can be controlled by the gate voltage. One measures the expected value of the charge of the eigenvectors of this quantum system by use of a radio-frequency single-electron transistor. A plot of this expected value of charge as a function of gate voltage resembles a staircase that, in the ideal case, consists of steps of height 2 e (where e is the charge of one electron). Experiments have shown that depending on the parameters of the device, quasiparticles in the form of "broken" Cooper pairs present in the reservoir can tunnel to the island, giving rise to steps of 1 e. This effect is sometimes called "poisoning." Simulations have shown that an extremely small average number of quasiparticles can generate a 1-e periodic signal. In a device according to the proposal, this poisoning would be turned to advantage. Depending on the wavelength, an antenna or other component would be used to couple radiation into the reservoir, wherein the absorption of photons would break Cooper pairs, thereby creating quasiparticles that, in turn, would tunnel to the island, creating a 1-e signal. On the basis of conservative estimates of device parameters derived from experimental data and computational simulations that fit the data, it has been estimated that the noise equivalent power of a device according to the proposal could be as low as 6 10(exp -22) W/Hz(exp 1/2). It has also been estimated that the spectroscopic resolution (photon energy divided by increment of photon energy) of such a device in visible light would exceed 100.

Mar 1, 20060 citations

ac Josephson Effect and Resonant Cooper Pair Tunneling Emission of a Single Cooper Pair Transistor

P.-M. Billangeon, F. Pierre, Hélène Bouchiat +1 more

We measure the high-frequency emission of a single Cooper pair transistor (SCPT) in the regime where transport is only due to tunneling of Cooper pairs. This is achieved by coupling on chip the SCPT to a superconductor-insulator-superconductor junction and by measuring the photon assisted tunneling current of quasiparticles across the junction. This technique allows a direct detection of the ac Josephson effect of the SCPT and provides evidence of Landau-Zener transitions for proper gate voltage. The emission in the regime of resonant Cooper pair tunneling is also investigated. It is interpreted in terms of transitions between charge states coupled by the Josephson effect.

arXiv:cond-mat/0609755Physical Review LettersMay 21, 200747 citations

Detecting parity effect in a superconducting device in the presence of parity switches

E. T. Mannila, V. F. Maisi, Hung Q. Nguyen +2 more

We present a superconducting device showing a clear parity effect in the number of electrons, even when there is, on average, a single nonequilibrium quasiparticle present and the parity of the island switches due to quasiparticles tunneling in and out of the device at rates on the order of 100 Hz. We detect the switching by monitoring in real time the charge state of a superconducting island connected to normal leads by tunnel junctions. The quasiparticles are created by Cooper pairs breaking on the island at a rate of a few kilohertz. We demonstrate that the pair breaking is caused by the backaction of the single-electron transistor used as a charge detector. With sufficiently low probing currents, our superconducting island is free of quasiparticles 97% of the time.

arXiv:1807.01733Physical review. B./Physical review. BJul 8, 201915 citations

Quasiparticle cooling of a single Cooper pair transistor

Andrew J. Ferguson

A superconducting tunnel junction is used to directly extract quasiparticles from one of the leads of a single Cooper pair transistor. The consequent reduction in quasiparticle density causes a lower rate of quasiparticle tunneling onto the device. This rate is directly measured by radio-frequency reflectometry. Local cooling may be of direct benefit in reducing the effect of quasiparticles on coherent superconducting nanostructures.

arXiv:0805.3445Applied Physics LettersAug 4, 20086 citations

Quantum capacitive phase detector

Leif Roschier, Mika A. Sillanpää, Pertti Juhani Hakonen

We discuss how a single Cooper-pair transistor may be used to detect the superconducting phase difference by using the phase dependence of the input capacitance from gate to ground. The proposed device has a low power dissipation because its operation is in principle free from quasiparticle generation. According to the sensitivity estimates, the device may be used for efficient qubit readout in a galvanically isolated and symmetrized circuit.

arXiv:cond-mat/0408145Physical Review BJan 31, 200515 citations

Quantum device applications of mesoscopic superconductivity

Mika E. T. Sillanpää

The work involves a study of physical phenomena that take place at very small length scales, below one micro-meter. At temperatures roughly below one degree Kelvin, quantum-mechanical effects may rule in electronic transport. Macroscopic quantum-coherent effects that occur in metallic superconducting microstructures, are particularly intriguing. Large-scale quantum information processing is widely believed to be attainable utilizing such physical systems. This work concentrates on answering the question of how the described quantum-mechanical systems may be used as sensitive measuring devices. Considerable attention is paid to energy-storing metallic microstructures whose electrical properties resemble those of the familiar inductor or capacitor. This research involves primarily experimental investigations conducted around temperatures of 0.1 Kelvin. Methods both at low and at radio frequencies have been used. The experimental findings have been modelled theoretically, and theoretical concepts for new physical phenomena have been introduced. An inductively measured radio-frequency Cooper-pair transistor, the L-SET, has been developed and experimentally verified in this work. Being highly sensitive, fast, and non-invasive, the L-SET appears to be the most promising method for measuring electric charge. Sensitivity in charge measurements of 20 millionths of the electron charge (micro-e) within one second, and an input bandwidth of 100 MHz, have been demonstrated. It has been shown theoretically that the ultimate measurement accuracy is about 0.1 micro-e within a second. A new phase detector based on the Cooper-pair transistor has been proposed. This system has also been shown to be potentially usable as a quantum bit. A new type of radio-frequency single-electron transistor built using a multi-walled carbon nanotube has been fabricated and operated. Technologies have been developed in order to make the physical nano- or microstructures. A method has been presented to fabricate non-superconducting tunnel junctions. Consequences of the inverse superconducting proximity effect on the studied superconducting structures were considered. Measurement procedures were investigated for a new low-noise nanoamplifier, the Bloch-oscillating transistor. Single superconducting tunnel junctions were tested as detectors of energy states of the environment, or of noise.

Apr 1, 20052 citations