Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Results in Physics

Enhanced Microwave-Optical Conversion Via Ancillary Electro-Mechanical Coupling

Tianli Wei, Dewei Wu, Qiang Miao, Chunyan Yang

Published Jan 1, 2021• 1 citation
Publisher

Abstract

Converting signals from the microwave to the optical domain has attracted great attention due to its potential applications in the field of quantum networks. Achieving efficient transduction is a significant yet challenging task, where a high efficiency at single photon level and low added noise are required. Electro-opto-mechanics have been proven to be efficient to convert microwave and optical photons bidirectionally. In this work, we propose and demonstrate an enhanced microwave-optical conversion in an electro-opto-mechanical system by introducing a mechanical ancilla attached the microwave resonator. Based on the ancillary electromechanical coupling, the damping rate of the microwave resonator is controlled and further leads to significant enhancement in conversion, such as the increase of conversion efficiency, broadening of conversion bandwidth and reduction of added noise. It provides a feasible approach to realize a broadband microwave-optical conversion with high efficiency. Moreover, the reduced added noise may break the limitation of quantum transduction due to the ancillary electromechanical coupling. Our scheme is also applicable and feasible for opto-mechanics and other systems to achieve practical quantum interface.

DOI
10.1016/j.rinp.2022.105347

Related papers

Microwave-to-Optical Transduction Using a Mechanical Supermode for Coupling Piezoelectric and Optomechanical Resonators

Marcelo Wu, Emil Zeuthen, Krishna C. Balram +1 more

The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency $\ensuremath{\eta}$ and added noise $N$. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in $\mathrm{Ga}\mathrm{As}$, followed by considerations of the $\mathrm{Al}\mathrm{N}$, ${\mathrm{Li}\mathrm{Nb}\mathrm{O}}_{3}$, and $\mathrm{Al}\mathrm{N}$-on-$\mathrm{Si}$ platforms. We present strategies for maximizing $\ensuremath{\eta}$ and minimizing $N$, and find that simultaneously achieving $\ensuremath{\eta}>50\mathrm{%}$ and $N<0.5$ should be possible with current technology. We find that the use of a mechanical supermode for mediating transduction is a key enabler for high-efficiency operation, particularly when paired with an appropriate microwave impedance-matching network. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a valuable resource for quantum information science.

arXiv:1907.04830•Physical Review Applied•Jan 16, 2020•74 citations

Microwave-to-optical transduction using coupled piezoelectric and optomechanical resonators

Marcelo Wu, Emil Zeuthen, Krishna C. Balram +1 more

The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically-mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency $\eta$ and added noise $N$. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in GaAs, followed by considerations of the AlN, LiNbO$_3$, and AlN-on-Si platforms. We present strategies for maximizing $\eta$ and minimizing $N$, and find that simultaneously achieving $\eta>50~\%$ and $N < 0.5$ should be possible with current technology. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a new resource for quantum information science.

•Jul 10, 2019•1 citation

Mechanically mediated optical-microwave quantum state transfer by feedback

Max P. Foreman, Jesse J. Slim, Warwick P. Bowen

State transfer between light and microwaves is a key challenge in quantum networks. Promising transducers use a mechanical intermediary that couples to both fields via radiation pressure. Such electro-optomechanical devices have achieved high efficiencies, yet require resolved-sideband cavities, and generally compromise in scalability and noise performance. Here, we relax this constraint by extending the protocol of Navarathna et al. that transfers optical quantum information onto a mechanical resonator using a broadband, sideband-unresolved cavity and feedback. Combining this with parametric mechanical-to-microwave conversion, we show that continuous optical-to-microwave quantum state transfer is possible using measurement-based feedback, while all-optical coherent feedback enables bidirectional transfer. To assess the transfer, we introduce the quantum transfer witness $\mathcal{W}_T$, which -- though similar to the input-referred added noise -- also identifies whether a channel is capable of both preserving Gaussian entanglement and outperforming classical transduction schemes. Finally, we show that quantum-compatible noise performance is within reach of current experimental capabilities. Our results unlock a new design space for electro-optomechanical transducers and strengthens their candidacy as scalable quantum links between distant nodes.

quant-pharXiv:2512.05457•Dec 8, 2025•0 citations

Tunable microwave-optical entanglement and conversion in multimode electro-opto-mechanics

Tianli Wei, Dewei Wu, Qiang Miao +2 more

We study tunable double-channel microwave-optical (M-O) entanglement and coherent conversion by controlling the quantum interference effect. This is realized in a two-mechanical-mode electro-opto-mechanical (EOM) system, in which two mechanical resonators (MRs) are coupled with each other by phase-dependent phonon-phonon interaction, and link the interaction between the microwave and optical cavity. It's demonstrated that the mechanical coupling between two MRs leads to the interference of two pathways of electro-opto-mechanical interaction, which can generate the tunable double-channel phenomena in comparison with a typical three-mode EOM system. In particular, by tuning of phonon-phonon interaction and couplings between cavities with MRs, we can not only steer the switch from the M-O interaction with a single channel to that of the double-channel, but also modulate the entanglement and conversion characteristics in each channel. Moreover, our scheme can be extended to an N-mechanical-mode EOM system, in which N discrete channels will be observed and controlled. This study opens up prospects for quantum information transduction and storage with a wide bandwidth and multichannel quantum interface.

Optics Express•Mar 8, 2022•5 citations

Microwave Photodetection with Electro-Opto-Mechanical Systems

Shabir Barzanjeh, M. C. de Oliveira, Stefano Pirandola

While detection of optical photons is today achieved with very high efficiencies, the detection of microwave fields at the photon level still poses non-trivial experimental challenges. In this Letter we propose a model of microwave photodetector which is based on the use of an electro-opto-mechanical system. Using state of the art technology, we show how single microwave photons can efficiently be converted into optical photons which are then measured by standard optics. The overall quantum efficiency of our microwave detector tends to one for achievable values of the optical and microwave cooperativity parameters. Our scheme could be used for sensing and scanning very faint microwave fields, as they may occur in radio astronomy, satellite and deep space communications.

arXiv:1410.4024•Oct 15, 2014•4 citations

Toward Scalable Heterogeneous Quantum Networks: Microwave-Optical Transduction Across Platforms

Tarvir Anjum Aditto, Jaiyan Sadid Ifty, Khondokar Zahin

The development of scalable quantum networks requires coherent interfaces capable of converting microwave photons used in superconducting quantum processors into optical photons suitable for long-distance fiber transmission. This review surveys recent progress in microwave-to-optical quantum transduction across optomechanical, electro-optic, and magneto-optic platforms, with emphasis on conversion efficiency, bandwidth, added noise, and operating temperature. In addition to standard metrics, we propose the internal efficiency eta_in and the magnon decay rate kappa_m/2pi as normalized parameters that enable fairer comparison across heterogeneous implementations. Optomechanical systems achieve internal phonon-to-photon efficiencies of 93% with sub-quantum added noise of 0.25 quanta at millikelvin temperatures. Electro-optic devices based on LiNbO3 and AlN have advanced from room-temperature efficiencies below 1% to millikelvin systems with internal efficiencies approaching 99.5%, added noise as low as 0.16 quanta at 60 mK, and bandwidths extending to several tens of megahertz. Magneto-optic (optomagnonic) platforms exhibit the lowest efficiencies (typically $10^{-10}$ to $10^{-8})$, but offer intrinsic non-reciprocity and broadband magnonic operation, with emerging approaches based on topological heterostructures and magnon squeezing predicting enhancements up to $10^{-4}$. Optomechanical systems appear promising for high-fidelity quantum state transfer, electro-optic transducers for high-bandwidth coherent links, and magneto-optic devices for non-reciprocal network components. We discuss the fundamental trade-off between efficiency and added noise across all three platforms, and argue that heterogeneous microwave-optical transduction is emerging as a key enabling technology for distributed quantum computing and large-scale quantum networks.

quant-pharXiv:2605.26976•May 27, 2026•0 citations
Converting signals from the microwave to the optical domain has attracted great attention due to its potential applications in the field of quantum networks. Achieving efficient transduction is a significant yet challenging task, where a high efficiency at single photon level and low added noise are required. Electro-opto-mechanics have been proven to be efficient to convert microwave and optical photons bidirectionally. In this work, we propose and demonstrate an enhanced microwave-optical conversion in an electro-opto-mechanical system by introducing a mechanical ancilla attached the microwave resonator. Based on the ancillary electromechanical coupling, the damping rate of the microwave resonator is controlled and further leads to significant enhancement in conversion, such as the increase of conversion efficiency, broadening of conversion bandwidth and reduction of added noise. It provides a feasible approach to realize a broadband microwave-optical conversion with high efficiency. Moreover, the reduced added noise may break the limitation of quantum transduction due to the ancillary electromechanical coupling. Our scheme is also applicable and feasible for opto-mechanics and other systems to achieve practical quantum interface.
The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency $\ensuremath{\eta}$ and added noise NNN. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in GaAs\mathrm{Ga}\mathrm{As}GaAs, followed by considerations of the AlN\mathrm{Al}\mathrm{N}AlN, LiNbO3{\mathrm{Li}\mathrm{Nb}\mathrm{O}}_{3}LiNbO3​, and AlN\mathrm{Al}\mathrm{N}AlN-on-Si\mathrm{Si}Si platforms. We present strategies for maximizing $\ensuremath{\eta}$ and minimizing NNN, and find that simultaneously achieving $\ensuremath{\eta}>50\mathrm{%}$ and N<0.5N<0.5N<0.5 should be possible with current technology. We find that the use of a mechanical supermode for mediating transduction is a key enabler for high-efficiency operation, particularly when paired with an appropriate microwave impedance-matching network. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a valuable resource for quantum information science.
The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically-mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency η\etaη and added noise NNN. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in GaAs, followed by considerations of the AlN, LiNbO3_33​, and AlN-on-Si platforms. We present strategies for maximizing η\etaη and minimizing NNN, and find that simultaneously achieving η>50 %\eta>50~\%η>50 % and N<0.5N < 0.5N<0.5 should be possible with current technology. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a new resource for quantum information science.
State transfer between light and microwaves is a key challenge in quantum networks. Promising transducers use a mechanical intermediary that couples to both fields via radiation pressure. Such electro-optomechanical devices have achieved high efficiencies, yet require resolved-sideband cavities, and generally compromise in scalability and noise performance. Here, we relax this constraint by extending the protocol of Navarathna et al. that transfers optical quantum information onto a mechanical resonator using a broadband, sideband-unresolved cavity and feedback. Combining this with parametric mechanical-to-microwave conversion, we show that continuous optical-to-microwave quantum state transfer is possible using measurement-based feedback, while all-optical coherent feedback enables bidirectional transfer. To assess the transfer, we introduce the quantum transfer witness WT\mathcal{W}_TWT​, which -- though similar to the input-referred added noise -- also identifies whether a channel is capable of both preserving Gaussian entanglement and outperforming classical transduction schemes. Finally, we show that quantum-compatible noise performance is within reach of current experimental capabilities. Our results unlock a new design space for electro-optomechanical transducers and strengthens their candidacy as scalable quantum links between distant nodes.
We study tunable double-channel microwave-optical (M-O) entanglement and coherent conversion by controlling the quantum interference effect. This is realized in a two-mechanical-mode electro-opto-mechanical (EOM) system, in which two mechanical resonators (MRs) are coupled with each other by phase-dependent phonon-phonon interaction, and link the interaction between the microwave and optical cavity. It's demonstrated that the mechanical coupling between two MRs leads to the interference of two pathways of electro-opto-mechanical interaction, which can generate the tunable double-channel phenomena in comparison with a typical three-mode EOM system. In particular, by tuning of phonon-phonon interaction and couplings between cavities with MRs, we can not only steer the switch from the M-O interaction with a single channel to that of the double-channel, but also modulate the entanglement and conversion characteristics in each channel. Moreover, our scheme can be extended to an N-mechanical-mode EOM system, in which N discrete channels will be observed and controlled. This study opens up prospects for quantum information transduction and storage with a wide bandwidth and multichannel quantum interface.
While detection of optical photons is today achieved with very high efficiencies, the detection of microwave fields at the photon level still poses non-trivial experimental challenges. In this Letter we propose a model of microwave photodetector which is based on the use of an electro-opto-mechanical system. Using state of the art technology, we show how single microwave photons can efficiently be converted into optical photons which are then measured by standard optics. The overall quantum efficiency of our microwave detector tends to one for achievable values of the optical and microwave cooperativity parameters. Our scheme could be used for sensing and scanning very faint microwave fields, as they may occur in radio astronomy, satellite and deep space communications.
The development of scalable quantum networks requires coherent interfaces capable of converting microwave photons used in superconducting quantum processors into optical photons suitable for long-distance fiber transmission. This review surveys recent progress in microwave-to-optical quantum transduction across optomechanical, electro-optic, and magneto-optic platforms, with emphasis on conversion efficiency, bandwidth, added noise, and operating temperature. In addition to standard metrics, we propose the internal efficiency eta_in and the magnon decay rate kappa_m/2pi as normalized parameters that enable fairer comparison across heterogeneous implementations. Optomechanical systems achieve internal phonon-to-photon efficiencies of 93% with sub-quantum added noise of 0.25 quanta at millikelvin temperatures. Electro-optic devices based on LiNbO3 and AlN have advanced from room-temperature efficiencies below 1% to millikelvin systems with internal efficiencies approaching 99.5%, added noise as low as 0.16 quanta at 60 mK, and bandwidths extending to several tens of megahertz. Magneto-optic (optomagnonic) platforms exhibit the lowest efficiencies (typically 10−1010^{-10}10−10 to 10−8)10^{-8})10−8), but offer intrinsic non-reciprocity and broadband magnonic operation, with emerging approaches based on topological heterostructures and magnon squeezing predicting enhancements up to 10−410^{-4}10−4. Optomechanical systems appear promising for high-fidelity quantum state transfer, electro-optic transducers for high-bandwidth coherent links, and magneto-optic devices for non-reciprocal network components. We discuss the fundamental trade-off between efficiency and added noise across all three platforms, and argue that heterogeneous microwave-optical transduction is emerging as a key enabling technology for distributed quantum computing and large-scale quantum networks.