Faithful conversion of quantum signals between microwave and optical frequencies is crucial for building quantum networks based on superconducting circuits and for detection of weak microwave signals.A promising route towards this task uses transducers based on mechanical oscillators, which interact with light via radiation pressure and with microwave fields by electrostatic forces.Existing theoretical proposals and experimental efforts focus on two avenues towards optomechanical transduction: time-independent schemes for conversion of propagating fields or state transfer via adiabatic passage.The former approach results in simple experimental setups but its applicability is limited by narrow conversion bandwidth.The latter strategy avoids this problem; nevertheless, this gain requires complex time-dependent control schemes and strong opto-and electromechanical coupling, which is out of reach for current systems.In an ideal optomechanical transducer, we would like to combine the advantages of both strategies, namely large bandwidth and simple, time-independent control.In this dissertation, I tackle this challenge and develop two schemes for quantum networking of superconducting circuits based on two different tactics.In the first case, the transducer is optimized for a specific task: generation of entanglement between two superconducting qubits.I show how two established experimental techniques-parity measurements on superconducting qubits and optomechanical force sensing-can be combined to create a conceptually simple device, in which entanglement between the qubits is generated by measurement and postselection.Second, I demonstrate that an array of optomechanical transducers is capable of converting arbitrary input signals within a large bandwidth.The conversion process is based on adiabatic passage but, unlike existing proposals, uses spatial (and not temporal) variation of the system parameters.This approach does not require strong coupling and significantly reduces added noise.Together, these two protocols pave the way to future quantum networks with superconducting systems.The scheme for entanglement generation can be implemented with current experimental technology and is well suited for proof of principle experiments.Large quantum networks with many nodes will, on the other hand, require transducers capable of reaching high communication rates.This goal can be achieved with the large bandwidth of optoelectromechanical arrays.
Faithful conversion of quantum signals between microwave and optical frequencies is crucial for building quantum networks based on superconducting circuits and for detection of weak microwave signals.A promising route towards this task uses transducers based on mechanical oscillators, which interact with light via radiation pressure and with microwave fields by electrostatic forces.Existing theoretical proposals and experimental efforts focus on two avenues towards optomechanical transduction: time-independent schemes for conversion of propagating fields or state transfer via adiabatic passage.The former approach results in simple experimental setups but its applicability is limited by narrow conversion bandwidth.The latter strategy avoids this problem; nevertheless, this gain requires complex time-dependent control schemes and strong opto-and electromechanical coupling, which is out of reach for current systems.In an ideal optomechanical transducer, we would like to combine the advantages of both strategies, namely large bandwidth and simple, time-independent control.In this dissertation, I tackle this challenge and develop two schemes for quantum networking of superconducting circuits based on two different tactics.In the first case, the transducer is optimized for a specific task: generation of entanglement between two superconducting qubits.I show how two established experimental techniques-parity measurements on superconducting qubits and optomechanical force sensing-can be combined to create a conceptually simple device, in which entanglement between the qubits is generated by measurement and postselection.Second, I demonstrate that an array of optomechanical transducers is capable of converting arbitrary input signals within a large bandwidth.The conversion process is based on adiabatic passage but, unlike existing proposals, uses spatial (and not temporal) variation of the system parameters.This approach does not require strong coupling and significantly reduces added noise.Together, these two protocols pave the way to future quantum networks with superconducting systems.The scheme for entanglement generation can be implemented with current experimental technology and is well suited for proof of principle experiments.Large quantum networks with many nodes will, on the other hand, require transducers capable of reaching high communication rates.This goal can be achieved with the large bandwidth of optoelectromechanical arrays.
A quantum network consisting of computational nodes connected by high-fidelity communication channels could expand information-processing capabilities beyond those of classical networks. Superconducting qubits hold promise for scalable quantum computation at microwave frequencies, but must operate in an isolated cryogenic environment; meanwhile, quantum communication over long distances has been demonstrated with optical photons. A fast, quantum-coherent interface between the two would be a key element of a large-scale quantum network or distributed quantum computer.In this thesis, we describe the theoretical basis as well as the practical design and development of a device incorporating a silicon optomechanical nanobeam and an aluminum-nitride-based electromechanical transducer. We find that this class of device has the potential to approach ideal quantum microwave-optical transduction. Finally, we experimentally demonstrate classical, continuous-wave operation of such a device with internal conversion efficiencies above 1%. This device also has a larger bandwidth than previous efficient microwave-optical transducers, allowing us to operate in the time domain with 20 ns pulses.
Superconducting circuits are important technological tools that have found various applications, notably hypothetical future superconducting quantum computers. Scaling such systems further is, however, proving challenging because of thermal heat load and space constraints in cryostats. One way of improving the scalability of such systems would be to resort to optical fibers for controlling the circuits in cryostats, as well as mediating long-distance interaction between them while preserving quantum coherence. Such a strategy relies on building a coherent interface between GHz frequencies and optical frequencies. This interface, referred to as "microwave-optical transducer", would need to exhibit high photon conversion efficiencies and very low added noise, ideally less than a quantum, in a cryogenic environment. Since the prospects of weaving networks of optically connected superconducting quantum processors have now attracted the attention of the scientific community for more than a decade, very efficient transducers have already been proposed and realized. However, despite their impressive performances against selected metrics, often equivalent to optimizing the on-chip conversion efficiency alone, none of the approaches pursued so far really solved the qubit interconnection problems in ways that could be applied to large-scale systems in the near future. The aim of this thesis was to develop transduction approaches that would ultimately enable optical driving of superconducting circuits and quantum state transfer between microwave and optical frequencies, while at the same time ensuring good scalability, both in terms of wafer manufacturability and integration in cryogenic environments. Integrated photonic circuits based on silicon nitride appeared as a promising platform, as silicon nitride is a CMOS-certified material, has a transparency window compatible with optical fibers and lacks two photon absorption. Realizing the coupling between microwave and optical frequencies in a way similar to what is done in optomechanics is desirable, because the field of optomechanics has seen the establishement of techniques that enable control of the low frequency degree of freedom at the quantum mechanical level, including ground state cooling, control of the susceptibility by dynamical backaction, quantum state transfer and entanglement. The heterogeneous integration of nonlinear crystalline thin films, such as lithium niobate and lithium tantalate, onto silicon nitride photonic circuitry endows it with an electro-optic activity that emulates the optomechanical interaction, while offering an inherent access to the microwave degree of freedom. However, material nonlinearities, including photorefraction, charge screening, and hysteresis, introduce complications that motivate exploring alternative approaches. Here, alongside an electro-optic implementation, a transducer that leverages the interaction of bulk acoustic resonances excited by micro-electromechanical systems with whispering-gallery-like modes of microresonators is presented. Coherent transduction between microwave and optical fields is demonstrated, and optomechanical dynamical backaction is observed. The transducers fast bandwidth, compatibility with multiplexing and ability to down-convert microwaves suggest interesting prospects, particularly upon further improvements of the optomechanical coupling.
Faithful conversion of quantum signals between microwave and optical frequency domains is crucial for building quantum networks based on superconducting circuits. Optoelectromechanical systems, in which microwave and optical cavity modes are coupled to a common mechanical oscillator, are a promising route towards this goal. In these systems, efficient, low-noise conversion is possible using a mechanically dark mode of the fields, but the conversion bandwidth is limited to a fraction of the cavity linewidth. Here, we show that an array of optoelectromechanical transducers can overcome this limitation and reach a bandwidth that is larger than the cavity linewidth. The coupling rates are varied in space throughout the array so that the mechanically dark mode of the propagating fields adiabatically changes from microwave to optical or vice versa. This strategy also leads to significantly reduced thermal noise with the collective optomechanical cooperativity being the relevant figure of merit. Finally, we demonstrate that the bandwidth enhancement is, surprisingly, largest for small arrays; this feature makes our scheme particularly attractive for state-of-the-art experimental setups.
Quantum networks of superconducting circuit quantum processors are an exciting prospect but are unfeasible without an efficient quantum interface between optical light and superconducting qubits. This problem motivates the development of a quantum microwave-to-optical transducer, a device that can faithfully transfer the state of a superconducting circuit to a photonic flying qubit and vice versa. This thesis describes our progress towards building a microwave-to-optical transducer mediated by phonons in a high-overtone bulk acoustic resonator (HBAR). Novel aluminum nitride-on-quartz HBARs are designed, fabricated, and tested. The acoustic loss rates are found to be near the state-of-the-art. Transduction-compatible transmon qubits are designed and tested. These qubits are capable of operating inside an optical cavity as well as achieving electromechanical interactions in the strong-coupling regime. An initial experiment studied how superconducting qubits recover after exposure to infrared light and demonstrated that the transduction-compatible qubits should be able to operate in a transducer with a reasonable duty cycle. The concept of microwave-to-optical transduction using multiple acoustic modes is established, and new simulation methods are developed to rapidly optimize HBARs. These tools are used to create a transduction-compatible qubit-HBAR device operating in the multi-mode strong coupling regime. Separately, a transduction compatible optical cavity was built and used to perform optomechanical measurements of a transduction-compatible HBAR and confirm that this device can reach the high-cooperativity regime. Finally, a measurement for verifying that a transducer is operating as a source of single photons is discussed. This can be accomplished by measuring the optical second-order correlation function of transduced photons. A filter cavity cascade is constructed to perform this measurement without being overwhelmed by optical pump leakage. These results establish bulk acoustic transduction as a promising platform for low-noise quantum microwave-to-optical transduction.
State transfer between light and microwaves is a key challenge in quantum networks. Promising transducers use a mechanical intermediary that couples to both fields via radiation pressure. Such electro-optomechanical devices have achieved high efficiencies, yet require resolved-sideband cavities, and generally compromise in scalability and noise performance. Here, we relax this constraint by extending the protocol of Navarathna et al. that transfers optical quantum information onto a mechanical resonator using a broadband, sideband-unresolved cavity and feedback. Combining this with parametric mechanical-to-microwave conversion, we show that continuous optical-to-microwave quantum state transfer is possible using measurement-based feedback, while all-optical coherent feedback enables bidirectional transfer. To assess the transfer, we introduce the quantum transfer witness WT, which -- though similar to the input-referred added noise -- also identifies whether a channel is capable of both preserving Gaussian entanglement and outperforming classical transduction schemes. Finally, we show that quantum-compatible noise performance is within reach of current experimental capabilities. Our results unlock a new design space for electro-optomechanical transducers and strengthens their candidacy as scalable quantum links between distant nodes.
The first quantum revolution has brought us the classical Internet and information technology. Today, as technology advances rapidly, the second quantum revolution quietly arrives, with a crucial moment for quantum technology to establish large-scale quantum networks. However, solid-state quantum bits (such as superconducting and semiconductor qubits) typically operate in the microwave frequency range, making it challenging to transmit signals over long distances. Therefore, there is an urgent need to develop quantum transducer chips capable of converting microwaves into optical photons in the communication band, since the thermal noise of optical photons at room temperature is negligible, rendering them an ideal information carrier for large-scale spatial communication. Such devices are important for connecting different physical platforms and efficiently transmitting quantum information. This paper focuses on the fast-developing field of optomechanical quantum transducers, which has flourished over the past decade, yielding numerous advanced achievements. We categorize transducers based on various mechanical resonators and discuss their principles of operation and their achievements. Based on existing research on optomechanical transducers, we compare the parameters of several mechanical resonators and analyze their advantages and limitations, as well as provide prospects for the future development of quantum transducers.