Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2512.05457

Mechanically mediated optical-microwave quantum state transfer by feedback

Max P. Foreman, Jesse J. Slim, Warwick P. Bowen

quant-phcond-mat.mes-hallSubmitted Dec 5, 2025• Announced Dec 8, 2025• 0 citations
arXivHTMLPDF

Abstract

State transfer between light and microwaves is a key challenge in quantum networks. Promising transducers use a mechanical intermediary that couples to both fields via radiation pressure. Such electro-optomechanical devices have achieved high efficiencies, yet require resolved-sideband cavities, and generally compromise in scalability and noise performance. Here, we relax this constraint by extending the protocol of Navarathna et al. that transfers optical quantum information onto a mechanical resonator using a broadband, sideband-unresolved cavity and feedback. Combining this with parametric mechanical-to-microwave conversion, we show that continuous optical-to-microwave quantum state transfer is possible using measurement-based feedback, while all-optical coherent feedback enables bidirectional transfer. To assess the transfer, we introduce the quantum transfer witness $\mathcal{W}_T$, which -- though similar to the input-referred added noise -- also identifies whether a channel is capable of both preserving Gaussian entanglement and outperforming classical transduction schemes. Finally, we show that quantum-compatible noise performance is within reach of current experimental capabilities. Our results unlock a new design space for electro-optomechanical transducers and strengthens their candidacy as scalable quantum links between distant nodes.

Comments
14 pages, includes Supplementary Information

Related papers

Microwave-to-optical transduction using coupled piezoelectric and optomechanical resonators

Marcelo Wu, Emil Zeuthen, Krishna C. Balram +1 more

The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically-mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency $\eta$ and added noise $N$. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in GaAs, followed by considerations of the AlN, LiNbO$_3$, and AlN-on-Si platforms. We present strategies for maximizing $\eta$ and minimizing $N$, and find that simultaneously achieving $\eta>50~\%$ and $N < 0.5$ should be possible with current technology. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a new resource for quantum information science.

•Jul 10, 2019•1 citation

Microwave-to-Optical Transduction Using a Mechanical Supermode for Coupling Piezoelectric and Optomechanical Resonators

Marcelo Wu, Emil Zeuthen, Krishna C. Balram +1 more

The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency $\ensuremath{\eta}$ and added noise $N$. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in $\mathrm{Ga}\mathrm{As}$, followed by considerations of the $\mathrm{Al}\mathrm{N}$, ${\mathrm{Li}\mathrm{Nb}\mathrm{O}}_{3}$, and $\mathrm{Al}\mathrm{N}$-on-$\mathrm{Si}$ platforms. We present strategies for maximizing $\ensuremath{\eta}$ and minimizing $N$, and find that simultaneously achieving $\ensuremath{\eta}>50\mathrm{%}$ and $N<0.5$ should be possible with current technology. We find that the use of a mechanical supermode for mediating transduction is a key enabler for high-efficiency operation, particularly when paired with an appropriate microwave impedance-matching network. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a valuable resource for quantum information science.

arXiv:1907.04830•Physical Review Applied•Jan 16, 2020•74 citations

Toward Scalable Heterogeneous Quantum Networks: Microwave-Optical Transduction Across Platforms

Tarvir Anjum Aditto, Jaiyan Sadid Ifty, Khondokar Zahin

The development of scalable quantum networks requires coherent interfaces capable of converting microwave photons used in superconducting quantum processors into optical photons suitable for long-distance fiber transmission. This review surveys recent progress in microwave-to-optical quantum transduction across optomechanical, electro-optic, and magneto-optic platforms, with emphasis on conversion efficiency, bandwidth, added noise, and operating temperature. In addition to standard metrics, we propose the internal efficiency eta_in and the magnon decay rate kappa_m/2pi as normalized parameters that enable fairer comparison across heterogeneous implementations. Optomechanical systems achieve internal phonon-to-photon efficiencies of 93% with sub-quantum added noise of 0.25 quanta at millikelvin temperatures. Electro-optic devices based on LiNbO3 and AlN have advanced from room-temperature efficiencies below 1% to millikelvin systems with internal efficiencies approaching 99.5%, added noise as low as 0.16 quanta at 60 mK, and bandwidths extending to several tens of megahertz. Magneto-optic (optomagnonic) platforms exhibit the lowest efficiencies (typically $10^{-10}$ to $10^{-8})$, but offer intrinsic non-reciprocity and broadband magnonic operation, with emerging approaches based on topological heterostructures and magnon squeezing predicting enhancements up to $10^{-4}$. Optomechanical systems appear promising for high-fidelity quantum state transfer, electro-optic transducers for high-bandwidth coherent links, and magneto-optic devices for non-reciprocal network components. We discuss the fundamental trade-off between efficiency and added noise across all three platforms, and argue that heterogeneous microwave-optical transduction is emerging as a key enabling technology for distributed quantum computing and large-scale quantum networks.

quant-pharXiv:2605.26976•May 27, 2026•0 citations

Continuous Optical-to-Mechanical Quantum State Transfer in the Unresolved Sideband Regime

Amy Navarathna, James S. Bennett, Warwick P. Bowen

Optical-to-mechanical quantum state transfer is an important capability for future quantum networks, quantum communication, and distributed quantum sensing. However, existing continuous state transfer protocols operate in the resolved sideband regime, necessitating a high-quality optical cavity and a high mechanical resonance frequency. Here, we propose a continuous protocol that operates in the unresolved sideband regime. The protocol is based on feedback cooling, can be implemented with current technology, and is able to transfer non-Gaussian quantum states with high fidelity. Our protocol significantly expands the kinds of optomechanical devices for which continuous optical-to-mechanical state transfer is possible, paving the way toward quantum technological applications and the preparation of macroscopic superpositions to test the fundamentals of quantum science.

arXiv:2301.03855•Physical Review Letters•Jun 30, 2023•8 citations

Fast and efficient transducers for microwave-optical quantum communication

G. A. Peairs

A quantum network consisting of computational nodes connected by high-fidelity communication channels could expand information-processing capabilities beyond those of classical networks. Superconducting qubits hold promise for scalable quantum computation at microwave frequencies, but must operate in an isolated cryogenic environment; meanwhile, quantum communication over long distances has been demonstrated with optical photons. A fast, quantum-coherent interface between the two would be a key element of a large-scale quantum network or distributed quantum computer.In this thesis, we describe the theoretical basis as well as the practical design and development of a device incorporating a silicon optomechanical nanobeam and an aluminum-nitride-based electromechanical transducer. We find that this class of device has the potential to approach ideal quantum microwave-optical transduction. Finally, we experimentally demonstrate classical, continuous-wave operation of such a device with internal conversion efficiencies above 1%. This device also has a larger bandwidth than previous efficient microwave-optical transducers, allowing us to operate in the time domain with 20 ns pulses.

•Jan 1, 2019•0 citations

Optically Distributing Remote Two-Node Microwave Entanglement Using Doubly Parametric Quantum Transducers

Akira Kyle, Curtis L. Rau, William D. Warfield +4 more

Doubly parametric quantum transducers (DPTs), such as electro-optomechanical devices, show promise as quantum interconnects between the optical and microwave domains, thereby enabling long-distance quantum networks between superconducting qubit systems. However, any transducer will inevitably introduce loss and noise that will degrade the performance of a quantum network. We explore how DPTs can be used to construct a network capable of distributing remote two-mode microwave entanglement over an optical link by comparing 14 different network topologies. The 14 topologies we analyze consist of combinations of different transducer operations, entangled resources, and entanglement-swapping measurements. For each topology, we derive a necessary and sufficient analytic threshold on DPT parameters that must be exceeded in order to distribute microwave-microwave entanglement. We find that the thresholds are dependent on the given network topology, along with the available entanglement resources and measurement capabilities. In the high-optical-loss limit, which is relevant to realistic networks, we find that down-conversion of each half of an optical two-mode squeezed vacuum state is the most robust topology. Finally, using currently achievable experimental capabilities, we find the encouraging result that several of these topologies could produce microwave-microwave entanglement. However, most of these topologies cannot work given current transducer performance, which demonstrates the importance of thoroughly analyzing all possible networks.

arXiv:2211.09762•Physical Review Applied•Jul 6, 2023•4 citations
State transfer between light and microwaves is a key challenge in quantum networks. Promising transducers use a mechanical intermediary that couples to both fields via radiation pressure. Such electro-optomechanical devices have achieved high efficiencies, yet require resolved-sideband cavities, and generally compromise in scalability and noise performance. Here, we relax this constraint by extending the protocol of Navarathna et al. that transfers optical quantum information onto a mechanical resonator using a broadband, sideband-unresolved cavity and feedback. Combining this with parametric mechanical-to-microwave conversion, we show that continuous optical-to-microwave quantum state transfer is possible using measurement-based feedback, while all-optical coherent feedback enables bidirectional transfer. To assess the transfer, we introduce the quantum transfer witness WT\mathcal{W}_TWT​, which -- though similar to the input-referred added noise -- also identifies whether a channel is capable of both preserving Gaussian entanglement and outperforming classical transduction schemes. Finally, we show that quantum-compatible noise performance is within reach of current experimental capabilities. Our results unlock a new design space for electro-optomechanical transducers and strengthens their candidacy as scalable quantum links between distant nodes.
The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically-mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency η\etaη and added noise NNN. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in GaAs, followed by considerations of the AlN, LiNbO3_33​, and AlN-on-Si platforms. We present strategies for maximizing η\etaη and minimizing NNN, and find that simultaneously achieving η>50 %\eta>50~\%η>50 % and N<0.5N < 0.5N<0.5 should be possible with current technology. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a new resource for quantum information science.
The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency $\ensuremath{\eta}$ and added noise NNN. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in GaAs\mathrm{Ga}\mathrm{As}GaAs, followed by considerations of the AlN\mathrm{Al}\mathrm{N}AlN, LiNbO3{\mathrm{Li}\mathrm{Nb}\mathrm{O}}_{3}LiNbO3​, and AlN\mathrm{Al}\mathrm{N}AlN-on-Si\mathrm{Si}Si platforms. We present strategies for maximizing $\ensuremath{\eta}$ and minimizing NNN, and find that simultaneously achieving $\ensuremath{\eta}>50\mathrm{%}$ and N<0.5N<0.5N<0.5 should be possible with current technology. We find that the use of a mechanical supermode for mediating transduction is a key enabler for high-efficiency operation, particularly when paired with an appropriate microwave impedance-matching network. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a valuable resource for quantum information science.
The development of scalable quantum networks requires coherent interfaces capable of converting microwave photons used in superconducting quantum processors into optical photons suitable for long-distance fiber transmission. This review surveys recent progress in microwave-to-optical quantum transduction across optomechanical, electro-optic, and magneto-optic platforms, with emphasis on conversion efficiency, bandwidth, added noise, and operating temperature. In addition to standard metrics, we propose the internal efficiency eta_in and the magnon decay rate kappa_m/2pi as normalized parameters that enable fairer comparison across heterogeneous implementations. Optomechanical systems achieve internal phonon-to-photon efficiencies of 93% with sub-quantum added noise of 0.25 quanta at millikelvin temperatures. Electro-optic devices based on LiNbO3 and AlN have advanced from room-temperature efficiencies below 1% to millikelvin systems with internal efficiencies approaching 99.5%, added noise as low as 0.16 quanta at 60 mK, and bandwidths extending to several tens of megahertz. Magneto-optic (optomagnonic) platforms exhibit the lowest efficiencies (typically 10−1010^{-10}10−10 to 10−8)10^{-8})10−8), but offer intrinsic non-reciprocity and broadband magnonic operation, with emerging approaches based on topological heterostructures and magnon squeezing predicting enhancements up to 10−410^{-4}10−4. Optomechanical systems appear promising for high-fidelity quantum state transfer, electro-optic transducers for high-bandwidth coherent links, and magneto-optic devices for non-reciprocal network components. We discuss the fundamental trade-off between efficiency and added noise across all three platforms, and argue that heterogeneous microwave-optical transduction is emerging as a key enabling technology for distributed quantum computing and large-scale quantum networks.
Optical-to-mechanical quantum state transfer is an important capability for future quantum networks, quantum communication, and distributed quantum sensing. However, existing continuous state transfer protocols operate in the resolved sideband regime, necessitating a high-quality optical cavity and a high mechanical resonance frequency. Here, we propose a continuous protocol that operates in the unresolved sideband regime. The protocol is based on feedback cooling, can be implemented with current technology, and is able to transfer non-Gaussian quantum states with high fidelity. Our protocol significantly expands the kinds of optomechanical devices for which continuous optical-to-mechanical state transfer is possible, paving the way toward quantum technological applications and the preparation of macroscopic superpositions to test the fundamentals of quantum science.
A quantum network consisting of computational nodes connected by high-fidelity communication channels could expand information-processing capabilities beyond those of classical networks. Superconducting qubits hold promise for scalable quantum computation at microwave frequencies, but must operate in an isolated cryogenic environment; meanwhile, quantum communication over long distances has been demonstrated with optical photons. A fast, quantum-coherent interface between the two would be a key element of a large-scale quantum network or distributed quantum computer.In this thesis, we describe the theoretical basis as well as the practical design and development of a device incorporating a silicon optomechanical nanobeam and an aluminum-nitride-based electromechanical transducer. We find that this class of device has the potential to approach ideal quantum microwave-optical transduction. Finally, we experimentally demonstrate classical, continuous-wave operation of such a device with internal conversion efficiencies above 1%. This device also has a larger bandwidth than previous efficient microwave-optical transducers, allowing us to operate in the time domain with 20 ns pulses.
Doubly parametric quantum transducers (DPTs), such as electro-optomechanical devices, show promise as quantum interconnects between the optical and microwave domains, thereby enabling long-distance quantum networks between superconducting qubit systems. However, any transducer will inevitably introduce loss and noise that will degrade the performance of a quantum network. We explore how DPTs can be used to construct a network capable of distributing remote two-mode microwave entanglement over an optical link by comparing 14 different network topologies. The 14 topologies we analyze consist of combinations of different transducer operations, entangled resources, and entanglement-swapping measurements. For each topology, we derive a necessary and sufficient analytic threshold on DPT parameters that must be exceeded in order to distribute microwave-microwave entanglement. We find that the thresholds are dependent on the given network topology, along with the available entanglement resources and measurement capabilities. In the high-optical-loss limit, which is relevant to realistic networks, we find that down-conversion of each half of an optical two-mode squeezed vacuum state is the most robust topology. Finally, using currently achievable experimental capabilities, we find the encouraging result that several of these topologies could produce microwave-microwave entanglement. However, most of these topologies cannot work given current transducer performance, which demonstrates the importance of thoroughly analyzing all possible networks.