Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

A Sub-GHz Impedance-Engineered Parametric Amplifier for the Readout of Sensors and Quantum Dots

Visa Vesterinen, Slawomir Simbierowicz, Robab Najafi Jabdaraghi, Leif Grönberg, J. S. Lehtinen, Mika Prunnila, Joonas Govenius

Published Feb 7, 2022• 3 citations
Publisher

Abstract

In the work on superconducting parametric amplifiers, the frequency band below one gigahertz is calling for systematic improvements. Despite a prospect for ultralow added noise, bandwidth limitations have slowed down the integration of such amplifiers into sub-GHz experiments demanding fast ($< 1\, \mu$s) readout speeds. Here, we study the impedance engineering of a flux-driven Josephson parametric amplifier (JPA) at 600 MHz. We propose, simulate and experimentally demonstrate a partially reconfigurable impedance transformer. The transformer enhances the JPA bandwidth to a state-of-the-art value of 10 MHz at 20 dB gain. Our amplifier has immediate applications in the readout of cryogenic sensors and in the reflectometry of quantum dots for spin qubit quantum computing.

DOI
10.1109/tasc.2022.3148965

Related papers

Broadband flux-pumped Josephson parametric amplifier with an on-chip coplanar waveguide impedance transformer

Peng Duan, Zhi-Long Jia, Chi Zhang +11 more

Abstract The rapid progress towards scalable quantum processors demands amplifiers with large bandwidths and high saturation powers. For this purpose, we present a broadband flux-pumped Josephson parametric amplifier integrated with an on-chip coplanar waveguide impedance transformer. Our device can be fabricated with simple and straightforward photo-lithography. This device experimentally achieves an operational bandwidth over 600 MHz with a gain above 15 dB, and a high saturation power with quantum-limited noise performance. In addition, the center frequency of this device can be tuned over several hundred megahertz, which in turn broadens the effective operational bandwidth to around 1 GHz.

Applied Physics Express•Mar 18, 2021•27 citations

Flux-pumped impedance-engineered broadband Josephson parametric amplifier

Joel Grebel, Audrey Bienfait, Étienne Dumur +7 more

Broadband quantum-limited amplifiers play a critical role in the single-shot readout of superconducting qubits, but a popular implementation, the traveling wave parametric amplifier, involves a complex design and fabrication process. Here, we present a simple design for a Josephson parametric amplifier, using a lumped element resonator comprising a superconducting quantum interference device whose useful bandwidth is enhanced with an on-chip impedance-matching circuit. We demonstrate a flux-coupling geometry that maximizes the coupling to the Josephson loop and minimizes spurious excitation of the amplifier resonant circuit. The amplifier, which operates in a flux-pumped mode, is demonstrated with a power gain of more than 20 dB over a bandwidth of about 300 MHz, where approximate noise measurements indicate quantum-limited performance. A procedure is given for optimizing the bandwidth for this kind of amplifier, using a linearized circuit simulation while minimizing non-linearities.

Applied Physics Letters•Apr 5, 2021•53 citations

Wireless Josephson parametric amplifier above 20 GHz

Z. Hao, J. Cochran, Y.-C. Chang +2 more

Operating superconducting qubits at elevated temperatures offers increased cooling power, thus system scalability, but requires suppression of thermal photons to preserve coherence and readout fidelity. This motivates migration to higher operation frequencies, which demands high-frequency amplification with near-quantum-limited noise characteristics for qubit readout. Here, we report the design and experimental realization of a wireless Josephson parametric amplifier (WJPA) operating above 20 GHz. The wireless design eliminates losses and impedance mismatches that become problematic at high frequencies. The WJPA achieves more than 20 dB of gain across a tunable frequency range of 21–23.5 GHz, with a typical 3 dB bandwidth of 3 MHz. Through Y-factor measurements and a qubit-based photon number calibration, we show that the amplifier exhibits an added noise of approximately two photons.

arXiv:2508.11137•Applied Physics Letters•Jan 5, 2026•4 citations

Fabrication of the Impedance-Matched Josephson Parametric Amplifier and the Study of the Gain Profile

Rui Liang Yang, Huiqiu Deng

We designed and fabricated an impedance-matched Josephson parametric amplifier (JPA) working in the flux-pump mode for the broadband amplification of microwave signals. A simple fabrication method suitable for a small cleanroom was developed. We also studied the phase response, as well as the gain, as a function of signal frequency and pump power at various pump frequencies. The phase response can be explained with the behavior of the nonlinear Duffing oscillator. The observed decrease of the resonance frequency as the pump power increases, as well as the emergence of an unstable bifurcation zone, are the characteristic nonlinear behavior of the Duffing oscillator. The features of the gain profile in the stable zone can be explained with a model adapted from the theoretical model for the two-dimensional gain profile of an impedance-matched, current-pumped JPA. Over 17 dB gain with a bandwidth more than 300 MHz (centered around 6.45 GHz) was observed. Our impedance-matched JPA is used for improving the fast readout fidelity of transmon qubits.

arXiv:1909.00707•IEEE Transactions on Applied Superconductivity•Apr 6, 2020•14 citations

Broadband coplanar-waveguide-based impedance-transformed Josephson parametric amplifier

Bingcheng Qing, Long B. Nguyen, Xinyu Liu +9 more

Quantum-limited Josephson parametric amplifiers play a pivotal role in advancing the field of circuit quantum electrodynamics by enabling the fast and high-fidelity measurement of weak microwave signals. Therefore, it is necessary to develop robust parametric amplifiers with low noise, broad bandwidth, and reduced design complexity for microwave detection. However, current broadband parametric amplifiers either have degraded noise performance or rely on complex designs. Here, we present a device based on the broadband impedance-transformed Josephson parametric amplifier that integrates a hornlike coplanar waveguide transmission line, which significantly decreases the design and fabrication complexity while keeping comparable performance. The device shows an instantaneous bandwidth of 700 (200) MHz for 15 (20) dB gain with an average input saturation power of −110 dBm and near quantum-limited added noise. The operating frequency can be tuned over 1.4 GHz using an external flux bias. We further demonstrate the negligible backaction from our device on a transmon qubit. The amplification performance and simplicity of our device promise its wide adaptation in quantum metrology, quantum communication, and quantum information processing. Published by the American Physical Society 2024

arXiv:2310.17084•Physical Review Research•Feb 22, 2024•11 citations

Lumped-element Josephson parametric amplifier at 650 MHz for nano-calorimeter readout

Visa Vesterinen, O.-P. Saira, Ilmo Räisänen +4 more

Abstract We design a sub-gigahertz Josephson parametric amplifier for the readout of nanoscale calorimeters which consist of normal-metal–superconductor heterostructures. We characterize the amplifier performance at two operating points, 605 and 655 MHz, corresponding to reproducible local frequency maxima with respect to the applied magnetic flux. At the 655 MHz operating point, the device displays its maximum small-signal gain of 32 dB and gain-bandwidth product of 2 π × 3.3 MHz . The gain remains above 20 dB for incident powers up to −119 dBm. The added noise of the amplifier, determined by the hot/cold source method, assumes a minimum value of 0.2 K.

Superconductor Science and Technology•Jun 27, 2017•13 citations
In the work on superconducting parametric amplifiers, the frequency band below one gigahertz is calling for systematic improvements. Despite a prospect for ultralow added noise, bandwidth limitations have slowed down the integration of such amplifiers into sub-GHz experiments demanding fast (<1 μ< 1\, \mu<1μs) readout speeds. Here, we study the impedance engineering of a flux-driven Josephson parametric amplifier (JPA) at 600 MHz. We propose, simulate and experimentally demonstrate a partially reconfigurable impedance transformer. The transformer enhances the JPA bandwidth to a state-of-the-art value of 10 MHz at 20 dB gain. Our amplifier has immediate applications in the readout of cryogenic sensors and in the reflectometry of quantum dots for spin qubit quantum computing.
Abstract The rapid progress towards scalable quantum processors demands amplifiers with large bandwidths and high saturation powers. For this purpose, we present a broadband flux-pumped Josephson parametric amplifier integrated with an on-chip coplanar waveguide impedance transformer. Our device can be fabricated with simple and straightforward photo-lithography. This device experimentally achieves an operational bandwidth over 600 MHz with a gain above 15 dB, and a high saturation power with quantum-limited noise performance. In addition, the center frequency of this device can be tuned over several hundred megahertz, which in turn broadens the effective operational bandwidth to around 1 GHz.
Broadband quantum-limited amplifiers play a critical role in the single-shot readout of superconducting qubits, but a popular implementation, the traveling wave parametric amplifier, involves a complex design and fabrication process. Here, we present a simple design for a Josephson parametric amplifier, using a lumped element resonator comprising a superconducting quantum interference device whose useful bandwidth is enhanced with an on-chip impedance-matching circuit. We demonstrate a flux-coupling geometry that maximizes the coupling to the Josephson loop and minimizes spurious excitation of the amplifier resonant circuit. The amplifier, which operates in a flux-pumped mode, is demonstrated with a power gain of more than 20 dB over a bandwidth of about 300 MHz, where approximate noise measurements indicate quantum-limited performance. A procedure is given for optimizing the bandwidth for this kind of amplifier, using a linearized circuit simulation while minimizing non-linearities.
Operating superconducting qubits at elevated temperatures offers increased cooling power, thus system scalability, but requires suppression of thermal photons to preserve coherence and readout fidelity. This motivates migration to higher operation frequencies, which demands high-frequency amplification with near-quantum-limited noise characteristics for qubit readout. Here, we report the design and experimental realization of a wireless Josephson parametric amplifier (WJPA) operating above 20 GHz. The wireless design eliminates losses and impedance mismatches that become problematic at high frequencies. The WJPA achieves more than 20 dB of gain across a tunable frequency range of 21–23.5 GHz, with a typical 3 dB bandwidth of 3 MHz. Through Y-factor measurements and a qubit-based photon number calibration, we show that the amplifier exhibits an added noise of approximately two photons.
We designed and fabricated an impedance-matched Josephson parametric amplifier (JPA) working in the flux-pump mode for the broadband amplification of microwave signals. A simple fabrication method suitable for a small cleanroom was developed. We also studied the phase response, as well as the gain, as a function of signal frequency and pump power at various pump frequencies. The phase response can be explained with the behavior of the nonlinear Duffing oscillator. The observed decrease of the resonance frequency as the pump power increases, as well as the emergence of an unstable bifurcation zone, are the characteristic nonlinear behavior of the Duffing oscillator. The features of the gain profile in the stable zone can be explained with a model adapted from the theoretical model for the two-dimensional gain profile of an impedance-matched, current-pumped JPA. Over 17 dB gain with a bandwidth more than 300 MHz (centered around 6.45 GHz) was observed. Our impedance-matched JPA is used for improving the fast readout fidelity of transmon qubits.
Quantum-limited Josephson parametric amplifiers play a pivotal role in advancing the field of circuit quantum electrodynamics by enabling the fast and high-fidelity measurement of weak microwave signals. Therefore, it is necessary to develop robust parametric amplifiers with low noise, broad bandwidth, and reduced design complexity for microwave detection. However, current broadband parametric amplifiers either have degraded noise performance or rely on complex designs. Here, we present a device based on the broadband impedance-transformed Josephson parametric amplifier that integrates a hornlike coplanar waveguide transmission line, which significantly decreases the design and fabrication complexity while keeping comparable performance. The device shows an instantaneous bandwidth of 700 (200) MHz for 15 (20) dB gain with an average input saturation power of −110 dBm and near quantum-limited added noise. The operating frequency can be tuned over 1.4 GHz using an external flux bias. We further demonstrate the negligible backaction from our device on a transmon qubit. The amplification performance and simplicity of our device promise its wide adaptation in quantum metrology, quantum communication, and quantum information processing. Published by the American Physical Society 2024
Abstract We design a sub-gigahertz Josephson parametric amplifier for the readout of nanoscale calorimeters which consist of normal-metal–superconductor heterostructures. We characterize the amplifier performance at two operating points, 605 and 655 MHz, corresponding to reproducible local frequency maxima with respect to the applied magnetic flux. At the 655 MHz operating point, the device displays its maximum small-signal gain of 32 dB and gain-bandwidth product of 2 π × 3.3 MHz . The gain remains above 20 dB for incident powers up to −119 dBm. The added noise of the amplifier, determined by the hot/cold source method, assumes a minimum value of 0.2 K.