Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Access

A Reliability Profile Based Low-Complexity Dynamic Schedule LDPC Decoding

Ruijia Yuan, Tianjiao Xie, Zhongfeng Wang

Published Dec 27, 2021• 3 citations
Publisher

Abstract

In order to improve the error correction performance of Low-Density Parity-Check (LDPC) codes, In this paper, we propose a Reliability Profile (RP) Based Low-Complexity Dynamic Schedule, called RPD. In terms of dynamic scheduling, the new RPD method is distinct from the existing residual belief propagation (RBP) and its variations, since RPD is based on residual criterion. Reliability divides nodes message into two categories: reliable and unreliable. By using as many messages as possible from the latest available current iteration instead of the previous iteration to update unreliable messages multiple times to speed up the convergence speed and increase the total number of updates of effective nodes message, so as to improve the Bit Error Rate (BER) performance. By not updating the reliable message, the number of ineffective nodes message updates is reduced, thereby reducing the decoding complexity. Besides, the more iterations increase, the fewer calculations of these reliable nodes. Moreover, based on reliability profile, RPD has an advantage over RBP for dynamic scheduling in that the former only needs integer operations, while the latter requires float operations. Therefore, the RPD algorithm not only accelerates the convergence speed of LDPC decoding and but also improves the BER performance while reducing the complexity.The analysis and simulation results show that the RPD strategy not only retains the fast-convergence advantage of RBP, but also has a better convergence BER performance compared to that of node-wise residual belief propagation (NW RBP). Furthermore, the simulation results show that the RPD can significantly improve the convergence speed of protograph LDPC decoding.

DOI
10.1109/access.2021.3138760

Related papers

A Novel Fast LDPC Decoder Using APP-Based Dynamic Scheduling Scheme

Tian Xia, Hsiao‐Chun Wu, Scott C.-H. Huang

Low-density parity-check (LDPC) codes are favorable in modern telecommunication technologies due to its superior error-correction capability especially when the codeword length is large. The commonly-used LDPC decoders are based on the belief-propagation (BP) algorithms. It is well known that the layered (serial) belief-propagation (LBP) decoding algorithms can reduce the number of iterations by half in comparison with the flooding (parallel) BP decoding algorithms. Further reduction in total number of iterations can be achieved by using the informed dynamic scheduling techniques, such as residual BP (RBP) and node-wise residual BP (NWRBP) methods. However, the incurred additional computation of residuals is far from trivial. In this paper, we propose a novel efficient dynamic scheduling scheme, called a posteriori probability RBP (APPRBP) algorithm, which offers more flexibility to leverage the performance-complexity trade-off using a threshold parameter. The simulation results demonstrate that the average iteration numbers for our proposed APPRBP algorithm can be remarkably reduced especially in the low E_b/N_0 (signal-energy-per-information-bit to noise-power-spectral-density ratio) conditions while the bit-error rate (BER) performance is subject to slight degradation.

Globecom•Dec 1, 2015•3 citations

A Novel Fast LDPC Decoder Using APP-Based Dynamic Scheduling Scheme

Tian Xia, Hsiao‐Chun Wu, Scott C.-H. Huang

Low-density parity-check (LDPC) codes are favorable in modern telecommunication technologies due to its superior error-correction capability especially when the codeword length is large. The commonly-used LDPC decoders are based on the belief-propagation (BP) algorithms. It is well known that the layered (serial) belief-propagation (LBP) decoding algorithms can reduce the number of iterations by half in comparison with the flooding (parallel) BP decoding algorithms. Further reduction in total number of iterations can be achieved by using the informed dynamic scheduling techniques, such as residual BP (RBP) and node-wise residual BP (NWRBP) methods. However, the incurred additional computation of residuals is far from trivial. In this paper, we propose a novel efficient dynamic scheduling scheme, called a posteriori probability RBP (APPRBP) algorithm, which offers more flexibility to leverage the performance-complexity trade-off using a threshold parameter. The simulation results demonstrate that the average iteration numbers for our proposed APPRBP algorithm can be remarkably reduced especially in the low E_b/N_0 (signal-energy-per-information-bit to noise-power-spectral-density ratio) conditions while the bit-error rate (BER) performance is subject to slight degradation.

Globecom•Dec 1, 2014•0 citations

Improved Decoding Algorithms of LDPC Codes Based on Reliability Metrics of Variable Nodes

Xingcheng Liu, Li'e Zi, Dong Yang +1 more

The informed dynamic scheduling (IDS) strategies for decoding of low-density parity-check codes obtained superior performance in error correction performance and convergence speed. However, there are still two problems existing in the current IDS algorithms. The first is that the current IDS algorithms only preferentially update the selected unreliable messages, but they do not guarantee the updating is performed with reliable information. In this paper, a two-step message selecting strategy is introduced. On the basis of the two reliability metrics and two types of variable node residuals, the residual belief propagation (BP) decoding algorithm, short for TRM-TVRBP, is proposed. With the algorithm, the reliability of the updating-messages can be improved. The second is the greediness problem, prevalently existed in the IDS-like algorithms. The problem arises mainly from the fact that the major computing resources are allocated to or concentrated on some nodes and edges. To overcome the problem, the reliability metric-based RBP algorithm (RM-RBP) is proposed, which can force every variable node to contribute its intrinsic information to the iterative decoding. At the same time, the algorithm can force the related variable nodes to be updated, and make every edge have an equal opportunity of being updated. The simulation results show that both the TRM-TVRBP and the RM-RBP have appealing convergence rate and error-correcting performance compared with the previous IDS decoders over the white Gaussian noise (AWGN) channel.

IEEE Access•Jan 1, 2019•13 citations

Improving LDPC Decoding Algorithm with Informed Dynamic Scheduling

An Q

To reduce the complexity and improve the performance of the decoding algorithm for Low Density Parity Check(LDPC) codes,an improved algorithm NW-RBPF based on the number of the updates of the check-nodes completed in an iteration is presented in this paper,which uses the minBP and a convergence factor to calculate the residual mentioned in NW-RBP algorithm.In this paper,the convergence factor is obtained by calculating the BERs using different factors.Simulations show that the algorithm achieves better performance than the NW-RBP algorithm in 0.05 dB.It also outperforms NW-RBP for a large numbers of iterations.Therefore,this algorithm provides both good performance and convergence speed for any check node degree distribution in the LDPC codes.

Video Engineering•Jan 1, 2014•0 citations

Low-Complexity LDPC Decoding Algorithm Based on Layered Vicinal Variable Node Scheduling

Mhammed Benhayoun, Mouhcine Razi, Anas Mansouri +1 more

The informed dynamic scheduling (IDS) strategies for the low-density parity check (LDPC) decoding have shown superior performance in error correction and convergence speed, particularly those based on reliability measures and residual belief propagation (RBP). However, the search for the most unreliable variable nodes and the residual precomputation required for each iteration of the IDS-LDPC increases the complexity of the decoding process which becomes more sequential, making it hard to exploit the parallelism of signal processing algorithms available in multicore platforms. To overcome this problem, a new, low-complexity scheduling system, called layered vicinal variable nodes scheduling (LWNS) is presented in this paper. With this LWNS, each variable node is updated by exchanging intrinsic information with all its associated control and variable nodes before moving to the next variable node updating. The proposed scheduling strategy is fixed by a preprocessing step of the parity control matrix instead of calculation of the residuals values and by computation of the most influential variable node instead the most unreliable metric. It also allows the parallel processing of independent Tanner graph subbranches identified and grouped in layers. Our simulation results show that the LWNS BP have an attractive convergence rate and better error correction performance with low complexity when compared to previous IDS decoders under the white Gaussian noise channel (AWGN).

Modelling and Simulation in Engineering•Jan 19, 2022•4 citations

Informed dynamic schedules for LDPC decoding using belief propagation

Huang–Chang Lee, Yeong-Luh Ueng

After the publication of the residual belief-propagation (RBP) algorithm, many low-density parity-check (LDPC) decoders using informed dynamic scheduling (IDS) have been investigated. In this paper, we propose the twofold-RBP (T-RBP) decoder that combines two residuals. Using T-RBP, significant improvement can be achieved in both convergence speed and convergence error-rate performance. In addition to T-RBP, the simplified-RBP (S-RBP) decoder is also proposed in order to reduce the complexity. Instead of comparing all the residuals of all edges in the code graph, as with previous IDS decoders, S-RBP only compares the residuals of the edges connected to a single check node, thus dramatically reduces the complexity without any significant degradation in performance. The proposed T-RBP and S-RBP can improve not only the performance of dedicated codes, but also that of punctured codes, especially the convergence speed. The improvement can make punctured LDPC codes more practical and becoming a competitive candidate for the rate compatible applications.

IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC)•Sep 1, 2013•4 citations
In order to improve the error correction performance of Low-Density Parity-Check (LDPC) codes, In this paper, we propose a Reliability Profile (RP) Based Low-Complexity Dynamic Schedule, called RPD. In terms of dynamic scheduling, the new RPD method is distinct from the existing residual belief propagation (RBP) and its variations, since RPD is based on residual criterion. Reliability divides nodes message into two categories: reliable and unreliable. By using as many messages as possible from the latest available current iteration instead of the previous iteration to update unreliable messages multiple times to speed up the convergence speed and increase the total number of updates of effective nodes message, so as to improve the Bit Error Rate (BER) performance. By not updating the reliable message, the number of ineffective nodes message updates is reduced, thereby reducing the decoding complexity. Besides, the more iterations increase, the fewer calculations of these reliable nodes. Moreover, based on reliability profile, RPD has an advantage over RBP for dynamic scheduling in that the former only needs integer operations, while the latter requires float operations. Therefore, the RPD algorithm not only accelerates the convergence speed of LDPC decoding and but also improves the BER performance while reducing the complexity.The analysis and simulation results show that the RPD strategy not only retains the fast-convergence advantage of RBP, but also has a better convergence BER performance compared to that of node-wise residual belief propagation (NW RBP). Furthermore, the simulation results show that the RPD can significantly improve the convergence speed of protograph LDPC decoding.
Low-density parity-check (LDPC) codes are favorable in modern telecommunication technologies due to its superior error-correction capability especially when the codeword length is large. The commonly-used LDPC decoders are based on the belief-propagation (BP) algorithms. It is well known that the layered (serial) belief-propagation (LBP) decoding algorithms can reduce the number of iterations by half in comparison with the flooding (parallel) BP decoding algorithms. Further reduction in total number of iterations can be achieved by using the informed dynamic scheduling techniques, such as residual BP (RBP) and node-wise residual BP (NWRBP) methods. However, the incurred additional computation of residuals is far from trivial. In this paper, we propose a novel efficient dynamic scheduling scheme, called a posteriori probability RBP (APPRBP) algorithm, which offers more flexibility to leverage the performance-complexity trade-off using a threshold parameter. The simulation results demonstrate that the average iteration numbers for our proposed APPRBP algorithm can be remarkably reduced especially in the low E_b/N_0 (signal-energy-per-information-bit to noise-power-spectral-density ratio) conditions while the bit-error rate (BER) performance is subject to slight degradation.
Low-density parity-check (LDPC) codes are favorable in modern telecommunication technologies due to its superior error-correction capability especially when the codeword length is large. The commonly-used LDPC decoders are based on the belief-propagation (BP) algorithms. It is well known that the layered (serial) belief-propagation (LBP) decoding algorithms can reduce the number of iterations by half in comparison with the flooding (parallel) BP decoding algorithms. Further reduction in total number of iterations can be achieved by using the informed dynamic scheduling techniques, such as residual BP (RBP) and node-wise residual BP (NWRBP) methods. However, the incurred additional computation of residuals is far from trivial. In this paper, we propose a novel efficient dynamic scheduling scheme, called a posteriori probability RBP (APPRBP) algorithm, which offers more flexibility to leverage the performance-complexity trade-off using a threshold parameter. The simulation results demonstrate that the average iteration numbers for our proposed APPRBP algorithm can be remarkably reduced especially in the low E_b/N_0 (signal-energy-per-information-bit to noise-power-spectral-density ratio) conditions while the bit-error rate (BER) performance is subject to slight degradation.
The informed dynamic scheduling (IDS) strategies for decoding of low-density parity-check codes obtained superior performance in error correction performance and convergence speed. However, there are still two problems existing in the current IDS algorithms. The first is that the current IDS algorithms only preferentially update the selected unreliable messages, but they do not guarantee the updating is performed with reliable information. In this paper, a two-step message selecting strategy is introduced. On the basis of the two reliability metrics and two types of variable node residuals, the residual belief propagation (BP) decoding algorithm, short for TRM-TVRBP, is proposed. With the algorithm, the reliability of the updating-messages can be improved. The second is the greediness problem, prevalently existed in the IDS-like algorithms. The problem arises mainly from the fact that the major computing resources are allocated to or concentrated on some nodes and edges. To overcome the problem, the reliability metric-based RBP algorithm (RM-RBP) is proposed, which can force every variable node to contribute its intrinsic information to the iterative decoding. At the same time, the algorithm can force the related variable nodes to be updated, and make every edge have an equal opportunity of being updated. The simulation results show that both the TRM-TVRBP and the RM-RBP have appealing convergence rate and error-correcting performance compared with the previous IDS decoders over the white Gaussian noise (AWGN) channel.
To reduce the complexity and improve the performance of the decoding algorithm for Low Density Parity Check(LDPC) codes,an improved algorithm NW-RBPF based on the number of the updates of the check-nodes completed in an iteration is presented in this paper,which uses the minBP and a convergence factor to calculate the residual mentioned in NW-RBP algorithm.In this paper,the convergence factor is obtained by calculating the BERs using different factors.Simulations show that the algorithm achieves better performance than the NW-RBP algorithm in 0.05 dB.It also outperforms NW-RBP for a large numbers of iterations.Therefore,this algorithm provides both good performance and convergence speed for any check node degree distribution in the LDPC codes.
The informed dynamic scheduling (IDS) strategies for the low-density parity check (LDPC) decoding have shown superior performance in error correction and convergence speed, particularly those based on reliability measures and residual belief propagation (RBP). However, the search for the most unreliable variable nodes and the residual precomputation required for each iteration of the IDS-LDPC increases the complexity of the decoding process which becomes more sequential, making it hard to exploit the parallelism of signal processing algorithms available in multicore platforms. To overcome this problem, a new, low-complexity scheduling system, called layered vicinal variable nodes scheduling (LWNS) is presented in this paper. With this LWNS, each variable node is updated by exchanging intrinsic information with all its associated control and variable nodes before moving to the next variable node updating. The proposed scheduling strategy is fixed by a preprocessing step of the parity control matrix instead of calculation of the residuals values and by computation of the most influential variable node instead the most unreliable metric. It also allows the parallel processing of independent Tanner graph subbranches identified and grouped in layers. Our simulation results show that the LWNS BP have an attractive convergence rate and better error correction performance with low complexity when compared to previous IDS decoders under the white Gaussian noise channel (AWGN).
After the publication of the residual belief-propagation (RBP) algorithm, many low-density parity-check (LDPC) decoders using informed dynamic scheduling (IDS) have been investigated. In this paper, we propose the twofold-RBP (T-RBP) decoder that combines two residuals. Using T-RBP, significant improvement can be achieved in both convergence speed and convergence error-rate performance. In addition to T-RBP, the simplified-RBP (S-RBP) decoder is also proposed in order to reduce the complexity. Instead of comparing all the residuals of all edges in the code graph, as with previous IDS decoders, S-RBP only compares the residuals of the edges connected to a single check node, thus dramatically reduces the complexity without any significant degradation in performance. The proposed T-RBP and S-RBP can improve not only the performance of dedicated codes, but also that of punctured codes, especially the convergence speed. The improvement can make punctured LDPC codes more practical and becoming a competitive candidate for the rate compatible applications.