The purpose of this thesis is to trap 85 Rb atoms in an optical lattice (a series of lightshifted optical potentials), and then verify the existence of a lattice through the use of Bragg scattering.An optical lattice requires the use of a magneto-optical trap to first collect the rubidium atoms and cool them to the Doppler limit (143 µK for 85 Rb), the optical lattice is capable of cooling atoms far below the Doppler cooling limit (∼10 µK).For this project we decided to start from scratch with an all new vacuum chamber, which required the construction of new magnetic coils (to cancel the Earth's magnetic field and to apply a magnetic gradient to the chamber necessary for the magneto-optical trap), as well as the use of a new method of leaking rubidium into the chamber.When we started it was necessary to overhaul the entire vacuum system and the lasers necessary to trap the atom.This thesis describes the progress achieved toward building the optical lattice.
The purpose of this thesis is to trap 85 Rb atoms in an optical lattice (a series of lightshifted optical potentials), and then verify the existence of a lattice through the use of Bragg scattering.An optical lattice requires the use of a magneto-optical trap to first collect the rubidium atoms and cool them to the Doppler limit (143 µK for 85 Rb), the optical lattice is capable of cooling atoms far below the Doppler cooling limit (∼10 µK).For this project we decided to start from scratch with an all new vacuum chamber, which required the construction of new magnetic coils (to cancel the Earth's magnetic field and to apply a magnetic gradient to the chamber necessary for the magneto-optical trap), as well as the use of a new method of leaking rubidium into the chamber.When we started it was necessary to overhaul the entire vacuum system and the lasers necessary to trap the atom.This thesis describes the progress achieved toward building the optical lattice.
This thesis presents work on a laser cooling experiment designed for trapping Rb atoms in a CO(_2) laser optical trap. Some emphasis is placed on experimental features designed to allow the future implementation of a neutral atom quantum computation scheme. The experiment was built from scratch and includes the development of stable and reliable lasers for laser cooling and the construction of a double-chamber ultra-high vacuum system. The construction of a magneto-optical trap and optical molasses are discussed and results presented. The search for a signature of atoms trapped in the CO(_2) laser optical trap is described but so far no such signature has been observed. Possible reasons for this difficulty are presented Numerical modeling of the optical potential expected from the CO(_2) laser lattice has been performed and the expected experimental parameters of trap depth and oscillation frequency deduced from them.
The long term aim of the work is to study non-equilibrium and symmetry-breaking phenomena for a Bose-Einstein condensate in time-dependent optical traps. The work presented in this thesis is mostly devoted to the design, construction and testing of the apparatus, in which condensation was successfully achieved. The first part of this thesis describes the design and construction of a hybrid setup for the production of a Bose-Einstein condensate (BEC) of 87 Rb in the |F = 2, m F = +2 > state. The vacuum system is composed of a first chamber, where a low-velocity intense source (LVIS) of atoms is produced to provide a pre-cooled atomic beam to the science chamber, where the magneto-optical trap (MOT) is produced, trapping more than 3 x 10 8 atoms at a temperature of roughly 400 μK. Forced radio- frequency evaporation is performed in a quadrupole magnetic trap and the atoms are transferred to a hybrid far-detuned optical trap in a crossed-beams configuration; evaporation in the optical potential leads to reliable production of a BEC every 50 s, composed of 10^5 atoms at a temperature of 10-30 nK. To ensure fine control on the optical potential depth and high intensity and pointing stability, a stabilisation system has been developed and characterised. The second part of this thesis describes the realisation of a 1D optical lattice, produced by two phase-locked laser beams emitting at 780 nm, with a red detuning of approximately 3.5 GHz, in counter-propagating configuration. Oscillating forces obtained by phase-modulating the optical potential are applied.
In this thesis, a transportable setup of an Yb atomic source for a lattice optical clock is built and characterized. All three laser setups for cooling and trapping the Yb atoms, together with the vacuum system, are contained on a transportable optical table.
The preparation of the atomic sample before doing spectroscopy on the clock transition starts by slowing the atoms in the Zeeman slower. This is followed by trapping the atoms in the pre-cooling and the post-cooling MOTs, before loading the atoms into the optical lattice. Slowing and pre-cooling the atoms is done using the strong transition at 399 nm. This cools the atoms down to around a mK. To successfully load the atoms in the optical lattice, we have to cool the atoms further to beyond 50 μK. This is done by exciting the weak transition at 556 nm. The atoms that are transferred into the post-cooling stage are cooled down to a few tens of μK. The atoms are then ready to be loaded into the optical lattice at the magic wavelength. The amplified laser light at 760 nm inside the 1-D intra-vacuum cavity results in a lattice trapping potential of approximately 50 μK. A transfer efficiency, from the MOT into the optical lattice, of more than 25% was measured.
The spectroscopy on the clock transition was done for 171Yb. A step-by-step mechanism was adopted, starting by exciting the forbidden transition at 578 nm inside the post-cooling stage MOT, by using the ”chopped-MOT” method. The 300 kHz Doppler-broadened line is then narrowed down to 3 kHz by switching on the light at 760 nm, while keeping the MOT on. The so-called ”chopped-lattice” technique helped suppress the Doppler-broadening; however the other effects due to the light and the magnetic fields of the MOT were still present. By switching off the MOT’s light and magnetic fields, the Yb atoms are completely trapped in the optical lattice. As a result, the FWHM of the spectroscopy line was reduced by a factor of 10.
Ultracold atoms are a desirable substrate for experiments in quantum optics due to their highly coherent nature. Magneto-Optical Traps (MOTs) are a commonly used apparatus for producing clouds of cold, neutrally charged atoms such as Rubidium. The method relies on the effect of Doppler cooling, where laser light that has been detuned slightly below an atomic resonance results in a net cooling effect on the atoms, and magnetic trapping, where a linear magnetic field gradient results in a position dependent restoring force that traps the desired atoms at a central point. In the UVic AMO lab, we aim to build a MOT that is capable of producing ultracold rubidium clouds with temperatures on the order of 10μK.
This thesis reports on the design and construction of, and results from, an optical-dipole trapping apparatus developed to confine ultracold rubidium atoms in a conservative, large period, optical-dipole trap. An ultra-high vacuum system was designed and constructed to create a very low- background pressure. A new technique of viewport construction was developed, allowing for the fabrication of economical, high-quality windows for transmission of mid-infra-red laser radiation. The construction of a magneto-optical trap (MOT) and an optical molasses, and the subsequent characterisation, are discussed. A theory for the ac-Stark shift of atoms in a far-detuned laser field was developed. The nature of the scalar and tensorial light-shifts of the ground and first excited states of alkali atoms - the 5s(^2)S1/2 and 5p(^2)P3/2 states of Rb - has been examined. The effect of the differential light-shifts between these states on the operation of efficient laser cooling is discussed. A quasi-electrostatic dipole trap (QUEST) was formed from 50 W of CO2 laser power (٢ = 10.6 μm), focussed to <100 μm. The transfer of ultra-cold atoms from the MOT and optical molasses to the QUEST have been examined. Single beam and standing wave geometries of the QUEST have been implemented, with lifetimes of many seconds. The theory for the ac-Stark effect due to a single laser field has been further developed to consider orthogonally polarised fields with independent wavelengths. The use of an auxiliary laser field, a Nd:YAG laser at λ = 1.064 μm, to enhance the number and density of atoms loaded into the QUEST has been proposed and realised.
The main subject of this thesis is to demonstrate that helium is a promising candidate for matter wave interferometry, with the goal of providing an improved value for the fine-structure constant, α. In particular, fast and efficient momentum transfer via Bloch oscillations in an optical lattice is demonstrated, together with the enhanced sensitivity offered by an ion-detector based detection scheme that is unique to metastable helium (He*). The experiments are performed in a setup that was built to produce, slow down and trap ultracold (~0.2 μK) He-4 atoms. The approach to realising an ultracold sample of He* atoms consists of a sequence of trapping and cooling stages. The experiment starts at the plasma discharge source, where helium atoms are excited to the so-called metastable 2-3S1 state, with a lifetime of ~7800 seconds, 20 eV above the atomic ground state. The atomic beam exiting from the source is 2-D collimated by 1083 nm laser light, resonant to the closed 2-3S1 - 2-3P2 cooling transition. Next, the atoms are slowed down from about 1000- to 50 m/s in a two meter long Zeeman slower through continuous absorption of resonant 1083 nm light. The slowed atoms are captured in a Magneto-Optical Trap (MOT), that holds up to 5x10^8 atoms at a temperature of 1 mK. The MOT cloud is compressed, spin-polarised and transferred to a cloverleaf Magnetic Trap (MT), which provides both axial and radial trapping through a set of coils outside the vacuum. In the MT, 1D-Doppler cooling is applied to the atomic sample to reduce the temperature to about 150 μK. Following this step, the temperature is reduced further by forced evaporative radio-frequency cooling, resulting in the onset of a Bose-Einstein Condensate (BEC). The atoms are transferred from the MT to a crossed horizontal optical dipole trap (ODT), in which the sample is further evaporatively cooled to produce a BEC of 5x10^6 atoms. The BEC is then transferred from the ODT to either a horizontal or vertical optical lattice, consisting of two counter-propagating laser beams at 1557 nm. By detuning the frequency of one of the lattice beams, the standing wave can be accelerated. The trapped helium atoms can follow the accelerating lattice through a process called Bloch oscillations (BO's), which describes the behaviour of particles in a periodic potential that are subjected to a force. Specifically, in this scenario, particles' velocities increase in increments of two recoil velocities, instead of continuously. Bloch oscillations of cold atoms in periodic potentials formed by optical lattices were first studied in 1996. Importantly, BO’s provide a way to efficiently accelerate atoms by coherently transferring a well controlled, large number of photon momenta, which has been used to increase the resolution of recoil measurements with caesium and rubidium atoms. In this thesis, Bloch oscillations with a metastable helium BEC are demonstrated. Due to its light mass, helium can be efficiently accelerated to high velocities which makes it a candidate for experiments that benefit from splitting the atomic wave-function over large distances. Additionally, Rabi-oscillations in an optical lattice are shown, which serve to probe the depth of the lattice, and a measurement of gravity through Bloch oscillations in a static vertical optical lattice is demonstrated, with a statistical uncertainty of 4x10^-5. Finally, the first proof of principle demonstration of a pulsed light He* atom interferometer is shown. The measurements illustrate the high signal-to-noise that can be obtained using an MCP detector. Next to that, we have demonstrated a method for determining the polarizability of atoms at specific wavelengths, by observing the induced change of the characteristic Bloch oscillation frequency by introducing that wavelength to the system.