Ultracold atoms are a desirable substrate for experiments in quantum optics due to their highly coherent nature. Magneto-Optical Traps (MOTs) are a commonly used apparatus for producing clouds of cold, neutrally charged atoms such as Rubidium. The method relies on the effect of Doppler cooling, where laser light that has been detuned slightly below an atomic resonance results in a net cooling effect on the atoms, and magnetic trapping, where a linear magnetic field gradient results in a position dependent restoring force that traps the desired atoms at a central point. In the UVic AMO lab, we aim to build a MOT that is capable of producing ultracold rubidium clouds with temperatures on the order of 10μK.
The magneto-optical trap (MOT) serves as the culmination of optical cooling and trapping, where by applying a linear magnetic field to orthogonal, circularly polarized, retroreflecting laser beams, one can produce a dense cloud of very cold atoms, on the order of μK. This work set out to create a magneto-optical trap using only visible light with the 6s 2S1/2 → 7p 2P◦ 3/2 transition of cesium-133, which is far weaker than the transition typically employed for a cesium-133 MOT. This transition alone has yet to be used in isolation to create a MOT, and the purpose of this work is to demonstrate the feasibility of such a MOT. While the creation of a MOT with the setup produced has thus far been unsuccessful, the components are in place for one to be made as a demonstration of optical cooling and trapping that should be visible to the naked eye. Additionally, an experimental setup was created for high precision measurements of the absolute energies of the 7p 2P◦ 1/2 and 7p 2P◦ 3/2 states. The theory behind the MOT and high precision spectroscopy is expounded upon within.
This thesis presents the optimization and characterization of a magneto-optical trap (MOT) setup for rubidium-87 atoms. The apparatus is designed to provide a source of cold atoms, with temperatures around 100
μK, near the tip of a hollow-core photonic crystal fiber. The ultimate goal is to load the cold atomic cloud into the fiber to explore the unique properties of this hybrid system. Since the number of captured atoms depends on the interplay between the magnetic field and detuning, a detailed study was conducted to investigate the number of trapped atoms as a function of different detuning values and magnetic field gradients. By comparing two measurement methods, it was determined that the MOT is capable of trapping approximately
107 rubidium atoms. The optimal magnetic field gradient and laser detuning frequency were found to be
B′=9.32G/cm and
δ≈−13 MHz, respectively. Additionally, the number of captured atoms was found to be strongly dependent on the background pressure inside the MOT chamber. In this regard, it was observed that by closing the rubidium source valve, the pressure can be reduced by up to 80\% over a 24-hour period, and one possible way to measure it could be through the background signal with the magnetic field gradient turned off. Then we analyzed the trap lifetime
τ, which is also inversely proportional to the partial pressure of rubidium. Under optimal conditions, we obtained a trap lifetime of
0.31s. Furthermore, a temperature estimation of the atomic cloud was performed using the time-of-flight (TOF) method. The velocity distribution along the
x-axis, which lie in the imaging plane, was captured with a CMOS camera and yielded temperature of
Tx=(252±20)μK. These results provide essential insights into the optimization of the MOT parameters and lay the foundation for future studies involving the loading of cold atoms into hollow-core photonic crystal fibers.
It has been more than 30 years since the first demonstration of a magneto-optical trap (MOT) using sodium atoms. Since then the MOT has revolutionised the field of atomic physics by facilitating the emergence of a broad range of productive avenues of research using atoms prepared at low temperatures and high densities. This thesis describes the development of a novel kind of magneto-optical trap: the blue-detuned MOT. Unlike in all previous MOTs the light is blue detuned from atomic resonances and drives "type-II" transitions that have dark ground-state sub-levels. A discussion of the position-dependent and velocity-dependent forces experienced by an atom or molecule in a MOT is first used to consolidate recent theoretical work and, in particular, to introduce the concept of a blue-detuned MOT. The design and construction of an experiment that has been built to demonstrate a blue-detuned MOT using \Rb{87} is described. A thorough characterisation of this novel MOT has been performed. At high magnetic field gradients, radiation-pressure-limited densities exceeding
1011~cm
−3 have been reached whilst temperatures are cooled below 30~\si{\micro K} by the efficient and robust sub-Doppler cooling mechanisms. The maximum phase-space density measured is
6×10−6, which is higher than in most normal atomic MOTs, comparable to the best dark SPOTs, and a million times higher than that reported for red-detuned type-II MOTs. This makes the blue-detuned MOT particularly attractive for molecules where laser cooling and trapping always uses type-II transitions. For the first time, a study of trap loss due to ultra-cold collisions between atoms occurring in the presence of near-resonant blue-detuned light is undertaken. Finally, the experiment is used to demonstrate many new and unreported configurations of MOT for \Rb{87}, showing that a comprehensive understanding of complicated MOTs is now possible, and presenting a clear direction for further research.
This thesis describes the construction and characterisation of a standard six-beam configuration magneto-optical trap (MOT) used to cool and trap neutral 85Rb atoms. This system is capable of producing a cloud of ~108 atoms whose average temperature is in the sub-Doppler range. The fabrication process for the production of subwavelength tapered optical nanofibres (TONFs) is also described, as well as their guiding properties. These have many proposed applications in the field of cold atoms. However, significant technical progress must be made before many of these applications can be realised. The objective of the research work was to combine the TONF with the cold atom setup to develop tapered optical nanofibres as a tool that can be used in cold atom experiments. This thesis presents a novel technique to measure the characteristics of a MOT by monitoring the spontaneous emission from the trapped atoms coupled into the guided mode of the TONF. This has allowed the measurement of cloud profile, loading times and decay times. This serves as a demonstration that TONFs can indeed play an important role in cold atom physics. The work presented here also describes a theoretical model for an atom diffraction grating based on oscillating magnetic fields produced by an array of current carrying wires.
This thesis reports on the generation of MOT for laser cooling and trapping of Rubidium 87 atoms. Probe-pump technique have been used in Rb gas cell and doppler free absorption peaks has been observed. Peak at the crossover frequency will be locked for laser cooling and repump beams. This locked freuqency used in MOT to trap Rb atoms. The technique of optical molasses is used to cool the atoms and quadrupole magnetic field applied to confine or trap atoms at the center of MOT. Two chambers are constructed for 2D and 3D MOT with different pressure. Rb atoms loaded efficiently from the high flux cold atom beam generated in a compact 2D MOT. This is the first step of Bose Einstein Condensate (BEC). A performance of 2D MOT was tested by another main chamber of 3D MOT contains 3 pairs of counter-propagating beams. Over 5x10⁶ atoms trapped in a 3D MOT with loading rate of 1:8x10⁶ atoms/sec. This experiment provided an excellent starting point for future experiment on Rydberg atoms in dense ultracold quantum gases.
Laser cooled and trapped atoms have been the workhorse of atomic physics for the past four decades. The predominant method has been the highly versatile Magneto-Optical Trap. We describe an alternative laser trap involving a simple geometry of collimated laser beams that provides both a velocity and position dependent restoring force such that a dense cloud of cold atoms is formed. This technique produces similar atom number (
>106) and density (
1010\,atoms/cm
3) to the Magneto-Optical Trap, albeit with \emph{no magnetic field}. The beam geometry is compatible with conventional sub-Doppler cooling techniques, allowing the trapped cloud to be cooled to
<10 μK. We demonstrate the validity and robustness of the trap by capturing
87Rb atoms directly from the background vapor and provide a theoretical discussion of the underlying principles. This trap has many unique properties that make it highly suitable for quantum sensing, timing, and computing applications as well as a new tool in fundamental science and metrology.