Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Journal of Energy

FPGA Utilized to Control the Coincidence Logic of Quantum Entangled Pairs (QEP)

Mohammed Munther A. Majeed, Zuriati Ahmad Zukarnain

Published Nov 21, 2021• 0 citations
Publisher

Abstract

Control of quantum signals is very robust design technique and very important in quantum signal processing (QSP). It is not easy in experimentation platforms. Field Programmable Gate Array (FPGA) is using to control very various range of devices in quantum fields through PCs. FPGA needs to run modules of components to communicate and interfacing with the PC, through decode perform commands to direct control of digital hardware’s. If programmer has a real-time control of the FPGA via USB, it can be possible to evaluate design parameters changes in real-time, without reprogramming the FPGA. That makes the proposed design platforms easier for researchers. This paper discusses experiment of control quantum signals by FPGA to control coincidence logic for Quantum Entangled Pair (QEP), that able to measure polarization correlations relationships between photons of the QEP. This FPGA helps to determine detection events at different detectors which can be attributed to a single photon pair. Also to determine the correlation time between two different beams frequencies is extremely accurate according to the delay between the beams, which is very short.

DOI
10.46300/91010.2021.15.12

Related papers

Multi-Channel Coincidence Counter For Coincidence Measurement

Jing Zhang

Coincidence counting is widely used in quantum optics.It could be used in measuring the pairs of polarization entangled photons and single photon interference.In quantum experiments,coincidence counting often needs more than 3 channels.In this case,it is necessary to use FPGA(Field-Programmable Gate Array) instead of discrete logic chips.FPGA also has the advantage of low cost and small size.Coincidence counter based on FPGA could support coincidence time window from 1 ns to several hundred ns.This helps to avoid noised caused by background light.This paper introduces the principle of multi-channel coincidence counter based on FPGA and gives its performance experimentally with two single photon counting modules.

Acta Sinica Quantum Optica•Jan 1, 2011•0 citations

Post-Measurement Adjustment of the Coincidence Window in Quantum Optics Experiments

Jaime Cariñe, Santiago Gómez, Giannini F. Obregon +4 more

We report on an electronic coincidence detection circuit for quantum photonic applications implemented on a field-programmable gate array (FPGA), which records each the time separation between detection events coming from single-photon detectors. We achieve a coincidence window as narrow as 500 ps with a series of optimizations on a readily-available and affordable FPGA development board. Our implementation allows real-time visualization of coincidence measurements for multiple coincidence window widths simultaneously. To demonstrate the advantage of our high-resolution visualization, we certified the generation of polarized entangled photons by collecting data from multiple coincidence windows with minimal accidental counts, obtaining a violation of the Clauser-Horne-Shimony-Holt (CHSH) Bell inequality by more than 338 standard deviations. Our results have shown the applicability of our electronic design in the field of quantum information.

IEEE Access•Jan 1, 2021•3 citations

FPGA-Based Real-Time Processing for Optical Quantum Measurement and Control

H. Wang, Yaping Lü, Yifei Chen +2 more

In the context of rapid technological advancements, progress in chip manufacturing technology is propelling electronic devices toward miniaturization and high efficiency at an unprecedented pace. The fundamental principles of quantum mechanics are beginning to play a crucial role in modern electronic devices, providing the foundation for new technological methods and research directions. Optical quantum signal processing, as an important branch of quantum technology, utilizes the quantum properties of photons for information processing and transmission, offering advantages such as high bandwidth, low noise, and strong resistance to interference. However, current optical quantum measurement and control instruments face significant challenges in terms of real-time performance and programming complexity, resulting in reduced data processing efficiency and significantly increased development costs. This study implements a real-time processing algorithm for optical quantum signals on a Field-Programmable Gate Array (FPGA). The algorithm possesses advantages of real-time performance, low power consumption, and high integration. It allows for rapid functionality switching and efficient optical quantum signal processing. The design specifically aims to enhance the signal-to-noise ratio, significantly improving measurement accuracy and reliability. Experimental results indicate that this method substantially enhances the measurement precision and signal-to-noise ratio of optical quantum signals. This research provides an efficient and reliable new method for optical quantum signal processing, laying a solid foundation for further studies in quantum communication, quantum computing, and quantum precision measurement.

IEEE Information Technology, Networking, Electronic and Automation Control Conference (ITNEC)•Sep 20, 2024•1 citation

DEVELOPMENT OF AN FPGA-BASED COINCIDENCE COUNTING SYSTEM FOR MULTIPLE SIGNALS

Centro de Investigaciones Ópticas (CIOp) – Universidad Nacional de La Plata – CIC – CONICET – Argentina, Matías Rubén Bolaños, A. Boette +5 more

The detection of temporally coincident signals plays an important role in different technological applications for metrology and communication, and particularly, in the area of quantum optics. In this sense, the simultaneous detection of two or more photons allows one to take advantage of the non-classical features of light that manifest themselves in certain types of correlations that cannot be described classically. We present here the development of programmable modules, by using FPGA technology, which are part of the coincident pulse detection and counting system. Our implementation, in a development board from Xilinx, allows to determine when two or more pulses overlap within a temporal window, with a configurable width in the range of 1 and 255 ns to compensate for possible path differences. We obtained the photodetection statistics result of the single and coincident pulse measurements and compared them with that predicted by a theoretical analysis. In addition, we have emulated the signals corresponding to different photon sources through a beam splitter, and obtained the photodetection statistics from which we determine, for each case, the second order correlation function g(2)(τ).

Anales/Anales AFA•Mar 28, 2023•1 citation

Design of FPGA and USB based control board for quantum experiments

Hao Liang

Design and implementation of FPGA-USB-based control board for quantum experiments are discussed. Usage of quantum random number generator, control-logic in FPGA and communication with PC though USB protocol are proposed. Flexible control-signal outputs and inputs are implemented. It has frame auto-sync function when frame error appears.

Chinese Journal of Quantum Electronics•Jan 1, 2010•1 citation

Time-Correlated Single-Photon Counting

Rachel Westerkamp

In this study of quantum optics, we want to extract information associated with quantum mechanically entangled photon pairs. Measurements involved here take advantage of the fact that the photon pairs, created at the same point in space and time, will arrive “in coincidence” at detectors placed equally far from the source. Conservation of momentum also constrains the placement of these detectors. These effects, in combination, allow us to differentiate between these entangled photons and other stray photons that may reach the detectors. Initial efforts have included building a more stable laser mount, studying parametric down conversion (the process of converting the single beam into the entangled photon pairs), and establishing a small time interval for coincidence detection. For this, we explore the consequences of moving away from a Field Programmable Gate Array (FPGA) for coincidence measurements and towards the use of a Programmable System on a Chip (PSoC), which essentially combines the fast digital logic gates of an FPGA with micro-controller functionality. We are gaining hands-on experience with some highly theoretical aspects intrinsic to quantum mechanics, expanding upon laboratory setups described in Mark Beck’s recent text on quantum mechanics, as well as materials from Exploring Quantum Physics through Hands-On Projects by David Prutchi and Shanni R. Prutchi.

•Jan 1, 2018•0 citations
Control of quantum signals is very robust design technique and very important in quantum signal processing (QSP). It is not easy in experimentation platforms. Field Programmable Gate Array (FPGA) is using to control very various range of devices in quantum fields through PCs. FPGA needs to run modules of components to communicate and interfacing with the PC, through decode perform commands to direct control of digital hardware’s. If programmer has a real-time control of the FPGA via USB, it can be possible to evaluate design parameters changes in real-time, without reprogramming the FPGA. That makes the proposed design platforms easier for researchers. This paper discusses experiment of control quantum signals by FPGA to control coincidence logic for Quantum Entangled Pair (QEP), that able to measure polarization correlations relationships between photons of the QEP. This FPGA helps to determine detection events at different detectors which can be attributed to a single photon pair. Also to determine the correlation time between two different beams frequencies is extremely accurate according to the delay between the beams, which is very short.
Coincidence counting is widely used in quantum optics.It could be used in measuring the pairs of polarization entangled photons and single photon interference.In quantum experiments,coincidence counting often needs more than 3 channels.In this case,it is necessary to use FPGA(Field-Programmable Gate Array) instead of discrete logic chips.FPGA also has the advantage of low cost and small size.Coincidence counter based on FPGA could support coincidence time window from 1 ns to several hundred ns.This helps to avoid noised caused by background light.This paper introduces the principle of multi-channel coincidence counter based on FPGA and gives its performance experimentally with two single photon counting modules.
We report on an electronic coincidence detection circuit for quantum photonic applications implemented on a field-programmable gate array (FPGA), which records each the time separation between detection events coming from single-photon detectors. We achieve a coincidence window as narrow as 500 ps with a series of optimizations on a readily-available and affordable FPGA development board. Our implementation allows real-time visualization of coincidence measurements for multiple coincidence window widths simultaneously. To demonstrate the advantage of our high-resolution visualization, we certified the generation of polarized entangled photons by collecting data from multiple coincidence windows with minimal accidental counts, obtaining a violation of the Clauser-Horne-Shimony-Holt (CHSH) Bell inequality by more than 338 standard deviations. Our results have shown the applicability of our electronic design in the field of quantum information.
In the context of rapid technological advancements, progress in chip manufacturing technology is propelling electronic devices toward miniaturization and high efficiency at an unprecedented pace. The fundamental principles of quantum mechanics are beginning to play a crucial role in modern electronic devices, providing the foundation for new technological methods and research directions. Optical quantum signal processing, as an important branch of quantum technology, utilizes the quantum properties of photons for information processing and transmission, offering advantages such as high bandwidth, low noise, and strong resistance to interference. However, current optical quantum measurement and control instruments face significant challenges in terms of real-time performance and programming complexity, resulting in reduced data processing efficiency and significantly increased development costs. This study implements a real-time processing algorithm for optical quantum signals on a Field-Programmable Gate Array (FPGA). The algorithm possesses advantages of real-time performance, low power consumption, and high integration. It allows for rapid functionality switching and efficient optical quantum signal processing. The design specifically aims to enhance the signal-to-noise ratio, significantly improving measurement accuracy and reliability. Experimental results indicate that this method substantially enhances the measurement precision and signal-to-noise ratio of optical quantum signals. This research provides an efficient and reliable new method for optical quantum signal processing, laying a solid foundation for further studies in quantum communication, quantum computing, and quantum precision measurement.
The detection of temporally coincident signals plays an important role in different technological applications for metrology and communication, and particularly, in the area of quantum optics. In this sense, the simultaneous detection of two or more photons allows one to take advantage of the non-classical features of light that manifest themselves in certain types of correlations that cannot be described classically. We present here the development of programmable modules, by using FPGA technology, which are part of the coincident pulse detection and counting system. Our implementation, in a development board from Xilinx, allows to determine when two or more pulses overlap within a temporal window, with a configurable width in the range of 1 and 255 ns to compensate for possible path differences. We obtained the photodetection statistics result of the single and coincident pulse measurements and compared them with that predicted by a theoretical analysis. In addition, we have emulated the signals corresponding to different photon sources through a beam splitter, and obtained the photodetection statistics from which we determine, for each case, the second order correlation function g(2)(τ).
In this study of quantum optics, we want to extract information associated with quantum mechanically entangled photon pairs. Measurements involved here take advantage of the fact that the photon pairs, created at the same point in space and time, will arrive “in coincidence” at detectors placed equally far from the source. Conservation of momentum also constrains the placement of these detectors. These effects, in combination, allow us to differentiate between these entangled photons and other stray photons that may reach the detectors. Initial efforts have included building a more stable laser mount, studying parametric down conversion (the process of converting the single beam into the entangled photon pairs), and establishing a small time interval for coincidence detection. For this, we explore the consequences of moving away from a Field Programmable Gate Array (FPGA) for coincidence measurements and towards the use of a Programmable System on a Chip (PSoC), which essentially combines the fast digital logic gates of an FPGA with micro-controller functionality. We are gaining hands-on experience with some highly theoretical aspects intrinsic to quantum mechanics, expanding upon laboratory setups described in Mark Beck’s recent text on quantum mechanics, as well as materials from Exploring Quantum Physics through Hands-On Projects by David Prutchi and Shanni R. Prutchi.