Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Acta Sinica Quantum Optica

Multi-Channel Coincidence Counter For Coincidence Measurement

Jing Zhang

Published Jan 1, 2011• 0 citations
OpenAlex

Abstract

Coincidence counting is widely used in quantum optics.It could be used in measuring the pairs of polarization entangled photons and single photon interference.In quantum experiments,coincidence counting often needs more than 3 channels.In this case,it is necessary to use FPGA(Field-Programmable Gate Array) instead of discrete logic chips.FPGA also has the advantage of low cost and small size.Coincidence counter based on FPGA could support coincidence time window from 1 ns to several hundred ns.This helps to avoid noised caused by background light.This paper introduces the principle of multi-channel coincidence counter based on FPGA and gives its performance experimentally with two single photon counting modules.

Related papers

An FPGA-based module for multiphoton coincidence counting

David A. Branning, M. Beck

We present a multi-channel coincidence-counting module for use in quantum optics experiments. The circuit takes up to four TTL pulse inputs and counts either 2-, 3-, or 4-fold coincidences, within a user-selected coincidence time window as short as 12 ns. The module can accurately count eight sets of multi-channel coincidences, for input rates of up to 84 MHz. Due to their low cost and small size, multiple modules can easily be combined to count arbitrary M-order coincidences among N inputs.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 1, 2012•12 citations

A Precise High Count-Rate FPGA Based Multi-Channel Coincidence Counting System for Quantum Photonics Applications

E. Arabul, Stefano Paesani, Scott Tancock +2 more

Coincidence counters play the role of gating events from the background noise in almost every quantum photonics setup. Precise multi-channel and high count-rate coincidence counting tools have become desirable due to an increase in the complexity of quantum photonics experiments. However, timing analyzers are struggling to meet these needs. We are proposing a Field Programmable Gate Array (FPGA) based coincidence counting system which provides 8 operational channels with 8.9 ps root mean square (RMS) resolution (with a bin width of 7.7 ps) and a count-rate of 320 million counts per second (MCPS) (with 40 MCPS per channel). We have successfully tested our design in different quantum photonics scenarios such as the detection of two-photon interference and pseudo-photon-number resolving detection of a coherent state of light where it has shown its capability of working beyond the saturation of detectors. Also, we have introduced a Dual Data Rate Registration TDC, which improved the linearity of the time tagging operation by using both clock edges without increasing the dead-time or using the space excessively. 1.2 LSB in max DNL error, 1.8 LSB in max INL error, 10 ps in FWHM and 3.2 ps in RMS resolution improvements were achieved.

IEEE photonics journal•Jan 22, 2020•17 citations

Design of the Multi-Channel Coincidence Counter Based on FPGA

Ye Hu

Based on FPGA a multi-channel coincidence counter is designed,in which the setting of window time is integrated in FPGA in order to improve the integration of the system. Furthermore,the coincidence counting experiment is conducted by using signal generator to simulate the pulse signal produced by single photo detector. Results show that the error of measurement is 0. 02%,and it can be used to judge the entangled photon pairs.

Hu'nan Shifan Daxue xuebao. Ziran kexue ban•Jan 1, 2014•0 citations

Arbitrary Configurable 20-Channel Coincidence Counting Unit for Multi-Qubit Quantum Experiment

Byung Kwon Park, Yong‐Su Kim, Young‐Wook Cho +2 more

This paper presents a 20-channel coincidence counting unit (CCU) using a low-end field-programmable gate array (FPGA). The architecture of the CCU can be configured arbitrarily to measure from twofold to twentyfold coincidence counts thanks to a multifold controllable architecture, which can be easily manipulated by a graphical user interface (GUI) program. In addition, it provides up to 20 of each input signal count simultaneously. The experimental results show twentyfold coincidence counts with the resolution occurring in a less than 0.5 ns coincidence window. This CCU has appropriate characteristics for various quantum optics experiments using multi-photon qubits.

Electronics•Feb 28, 2021•10 citations

FPGA-based gating and logic for multichannel single photon counting

Raphael C. Pooser, Dennis D. Earl, Philip G. Evans +3 more

We present results characterizing multichannel InGaAs single photon detectors utilizing gated passive quenching circuits (GPQC), self-differencing techniques, and field programmable gate array (FPGA)-based logic for both diode gating and coincidence counting. Utilizing FPGAs for the diode gating frontend and the logic counting backend has the advantage of low cost compared to custom built logic circuits and current off-the-shelf detector technology. Further, FPGA logic counters have been shown to work well in quantum key distribution (QKD) test beds. Our setup combines multiple independent detector channels in a reconfigurable manner via an FPGA backend and post processing in order to perform coincidence measurements between any two or more detector channels simultaneously. Using this method, states from a multi-photon polarization entangled source are detected and characterized via coincidence counting on the FPGA. Photons detection events are also processed by the quantum information toolkit for application testing (QITKAT).

Journal of Modern Optics•Jul 30, 2012•14 citations

Data acquisition system for fast multichannel coincidence photon counting

Hossein Kavianipour, C. Böhm, Mohamed Bourennane

In this paper we present the data acquisition (DAQ) system for a multichannel coincidence photon counter where this DAQ is optimized for a small coincidence window, high speed data retrieving without reduction and parallel data processing. For single photon detection we use Avalanche Photodiodes (APD) which are practical tools for detection in quantum optics and photonics quantum information experiments. However they introduce noise into the measurements originating from their dark count detection and after pulsing. One way to limit this contribution is to decrease the time window in which the coincidence detection measurement is performed. We have developed this DAQ based entirely on a standard Field Programmable Gate Array (FPGA) where the width of the coincidence time window is in the sub-nanosecond range. The same unit is also responsible for sending the result to the User Interface (UI). The communication between the UI and the FPGA platform is through a single link Peripheral Component Interconnect Express (PCIe) by means of streaming DMA. Our DAQ is developed for Xilinx Spartan-6 devices but other devices are also supported. A Linux driver with all necessary functionality to communicate with the DAQ as well as the UI is also developed. The use of our unit can be extended for other detection counting physical systems.

IEEE-NPSS Real-Time Conference•May 1, 2014•0 citations
Coincidence counting is widely used in quantum optics.It could be used in measuring the pairs of polarization entangled photons and single photon interference.In quantum experiments,coincidence counting often needs more than 3 channels.In this case,it is necessary to use FPGA(Field-Programmable Gate Array) instead of discrete logic chips.FPGA also has the advantage of low cost and small size.Coincidence counter based on FPGA could support coincidence time window from 1 ns to several hundred ns.This helps to avoid noised caused by background light.This paper introduces the principle of multi-channel coincidence counter based on FPGA and gives its performance experimentally with two single photon counting modules.
Coincidence counters play the role of gating events from the background noise in almost every quantum photonics setup. Precise multi-channel and high count-rate coincidence counting tools have become desirable due to an increase in the complexity of quantum photonics experiments. However, timing analyzers are struggling to meet these needs. We are proposing a Field Programmable Gate Array (FPGA) based coincidence counting system which provides 8 operational channels with 8.9 ps root mean square (RMS) resolution (with a bin width of 7.7 ps) and a count-rate of 320 million counts per second (MCPS) (with 40 MCPS per channel). We have successfully tested our design in different quantum photonics scenarios such as the detection of two-photon interference and pseudo-photon-number resolving detection of a coherent state of light where it has shown its capability of working beyond the saturation of detectors. Also, we have introduced a Dual Data Rate Registration TDC, which improved the linearity of the time tagging operation by using both clock edges without increasing the dead-time or using the space excessively. 1.2 LSB in max DNL error, 1.8 LSB in max INL error, 10 ps in FWHM and 3.2 ps in RMS resolution improvements were achieved.
This paper presents a 20-channel coincidence counting unit (CCU) using a low-end field-programmable gate array (FPGA). The architecture of the CCU can be configured arbitrarily to measure from twofold to twentyfold coincidence counts thanks to a multifold controllable architecture, which can be easily manipulated by a graphical user interface (GUI) program. In addition, it provides up to 20 of each input signal count simultaneously. The experimental results show twentyfold coincidence counts with the resolution occurring in a less than 0.5 ns coincidence window. This CCU has appropriate characteristics for various quantum optics experiments using multi-photon qubits.
We present results characterizing multichannel InGaAs single photon detectors utilizing gated passive quenching circuits (GPQC), self-differencing techniques, and field programmable gate array (FPGA)-based logic for both diode gating and coincidence counting. Utilizing FPGAs for the diode gating frontend and the logic counting backend has the advantage of low cost compared to custom built logic circuits and current off-the-shelf detector technology. Further, FPGA logic counters have been shown to work well in quantum key distribution (QKD) test beds. Our setup combines multiple independent detector channels in a reconfigurable manner via an FPGA backend and post processing in order to perform coincidence measurements between any two or more detector channels simultaneously. Using this method, states from a multi-photon polarization entangled source are detected and characterized via coincidence counting on the FPGA. Photons detection events are also processed by the quantum information toolkit for application testing (QITKAT).
In this paper we present the data acquisition (DAQ) system for a multichannel coincidence photon counter where this DAQ is optimized for a small coincidence window, high speed data retrieving without reduction and parallel data processing. For single photon detection we use Avalanche Photodiodes (APD) which are practical tools for detection in quantum optics and photonics quantum information experiments. However they introduce noise into the measurements originating from their dark count detection and after pulsing. One way to limit this contribution is to decrease the time window in which the coincidence detection measurement is performed. We have developed this DAQ based entirely on a standard Field Programmable Gate Array (FPGA) where the width of the coincidence time window is in the sub-nanosecond range. The same unit is also responsible for sending the result to the User Interface (UI). The communication between the UI and the FPGA platform is through a single link Peripheral Component Interconnect Express (PCIe) by means of streaming DMA. Our DAQ is developed for Xilinx Spartan-6 devices but other devices are also supported. A Linux driver with all necessary functionality to communicate with the DAQ as well as the UI is also developed. The use of our unit can be extended for other detection counting physical systems.