Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Access

Post-Measurement Adjustment of the Coincidence Window in Quantum Optics Experiments

Jaime Cariñe, Santiago Gómez, Giannini F. Obregon, Esteban S. Gómez, Miguel E. Figueroa, G. Lima, GUILHERME BARRETO XAVIER

Published Jan 1, 2021• 3 citations
Publisher

Abstract

We report on an electronic coincidence detection circuit for quantum photonic applications implemented on a field-programmable gate array (FPGA), which records each the time separation between detection events coming from single-photon detectors. We achieve a coincidence window as narrow as 500 ps with a series of optimizations on a readily-available and affordable FPGA development board. Our implementation allows real-time visualization of coincidence measurements for multiple coincidence window widths simultaneously. To demonstrate the advantage of our high-resolution visualization, we certified the generation of polarized entangled photons by collecting data from multiple coincidence windows with minimal accidental counts, obtaining a violation of the Clauser-Horne-Shimony-Holt (CHSH) Bell inequality by more than 338 standard deviations. Our results have shown the applicability of our electronic design in the field of quantum information.

DOI
10.1109/access.2021.3093371

Related papers

FPGA-based gating and logic for multichannel single photon counting

Raphael C. Pooser, Dennis D. Earl, Philip G. Evans +3 more

We present results characterizing multichannel InGaAs single photon detectors utilizing gated passive quenching circuits (GPQC), self-differencing techniques, and field programmable gate array (FPGA)-based logic for both diode gating and coincidence counting. Utilizing FPGAs for the diode gating frontend and the logic counting backend has the advantage of low cost compared to custom built logic circuits and current off-the-shelf detector technology. Further, FPGA logic counters have been shown to work well in quantum key distribution (QKD) test beds. Our setup combines multiple independent detector channels in a reconfigurable manner via an FPGA backend and post processing in order to perform coincidence measurements between any two or more detector channels simultaneously. Using this method, states from a multi-photon polarization entangled source are detected and characterized via coincidence counting on the FPGA. Photons detection events are also processed by the quantum information toolkit for application testing (QITKAT).

Journal of Modern Optics•Jul 30, 2012•14 citations

A Precise High Count-Rate FPGA Based Multi-Channel Coincidence Counting System for Quantum Photonics Applications

E. Arabul, Stefano Paesani, Scott Tancock +2 more

Coincidence counters play the role of gating events from the background noise in almost every quantum photonics setup. Precise multi-channel and high count-rate coincidence counting tools have become desirable due to an increase in the complexity of quantum photonics experiments. However, timing analyzers are struggling to meet these needs. We are proposing a Field Programmable Gate Array (FPGA) based coincidence counting system which provides 8 operational channels with 8.9 ps root mean square (RMS) resolution (with a bin width of 7.7 ps) and a count-rate of 320 million counts per second (MCPS) (with 40 MCPS per channel). We have successfully tested our design in different quantum photonics scenarios such as the detection of two-photon interference and pseudo-photon-number resolving detection of a coherent state of light where it has shown its capability of working beyond the saturation of detectors. Also, we have introduced a Dual Data Rate Registration TDC, which improved the linearity of the time tagging operation by using both clock edges without increasing the dead-time or using the space excessively. 1.2 LSB in max DNL error, 1.8 LSB in max INL error, 10 ps in FWHM and 3.2 ps in RMS resolution improvements were achieved.

IEEE photonics journal•Jan 22, 2020•17 citations

Multi-Channel Coincidence Counter For Coincidence Measurement

Jing Zhang

Coincidence counting is widely used in quantum optics.It could be used in measuring the pairs of polarization entangled photons and single photon interference.In quantum experiments,coincidence counting often needs more than 3 channels.In this case,it is necessary to use FPGA(Field-Programmable Gate Array) instead of discrete logic chips.FPGA also has the advantage of low cost and small size.Coincidence counter based on FPGA could support coincidence time window from 1 ns to several hundred ns.This helps to avoid noised caused by background light.This paper introduces the principle of multi-channel coincidence counter based on FPGA and gives its performance experimentally with two single photon counting modules.

Acta Sinica Quantum Optica•Jan 1, 2011•0 citations

Data acquisition system for fast multichannel coincidence photon counting

Hossein Kavianipour, C. Böhm, Mohamed Bourennane

In this paper we present the data acquisition (DAQ) system for a multichannel coincidence photon counter where this DAQ is optimized for a small coincidence window, high speed data retrieving without reduction and parallel data processing. For single photon detection we use Avalanche Photodiodes (APD) which are practical tools for detection in quantum optics and photonics quantum information experiments. However they introduce noise into the measurements originating from their dark count detection and after pulsing. One way to limit this contribution is to decrease the time window in which the coincidence detection measurement is performed. We have developed this DAQ based entirely on a standard Field Programmable Gate Array (FPGA) where the width of the coincidence time window is in the sub-nanosecond range. The same unit is also responsible for sending the result to the User Interface (UI). The communication between the UI and the FPGA platform is through a single link Peripheral Component Interconnect Express (PCIe) by means of streaming DMA. Our DAQ is developed for Xilinx Spartan-6 devices but other devices are also supported. A Linux driver with all necessary functionality to communicate with the DAQ as well as the UI is also developed. The use of our unit can be extended for other detection counting physical systems.

IEEE-NPSS Real-Time Conference•May 1, 2014•0 citations

Time-tagged coincidence counting unit for large-scale photonic quantum computing

Wei Li, Yi Hu, Han-Sen Zhong +4 more

Real-time analysis of single-photon coincidence is critical in photonic quantum computing. The large channel number and high counting rate foreseen in such experiments pose a big challenge for the conventional time tagged method and coincidence instruments. Here we propose a real-time time-tagged coincidence method and a data filtering solution, demonstrated by a 32-channel coincidence counting unit that has been implemented successfully on a field-programmable gate array system. The unit provides high counting rates, a tunable coincidence window, and a timing resolution of 390 ps. Beyond that, it is feasible to be scaled up to 104 channels and is thus ideally suited for channel consuming applications such as boson sampling. Based on the versatility and scalability the unit has shown, we believe that it is the turn-key solution for many single-photon coincidence counting applications in photonic quantum computing.

Review of Scientific Instruments•Oct 1, 2018•9 citations

DEVELOPMENT OF AN FPGA-BASED COINCIDENCE COUNTING SYSTEM FOR MULTIPLE SIGNALS

Centro de Investigaciones Ópticas (CIOp) – Universidad Nacional de La Plata – CIC – CONICET – Argentina, Matías Rubén Bolaños, A. Boette +5 more

The detection of temporally coincident signals plays an important role in different technological applications for metrology and communication, and particularly, in the area of quantum optics. In this sense, the simultaneous detection of two or more photons allows one to take advantage of the non-classical features of light that manifest themselves in certain types of correlations that cannot be described classically. We present here the development of programmable modules, by using FPGA technology, which are part of the coincident pulse detection and counting system. Our implementation, in a development board from Xilinx, allows to determine when two or more pulses overlap within a temporal window, with a configurable width in the range of 1 and 255 ns to compensate for possible path differences. We obtained the photodetection statistics result of the single and coincident pulse measurements and compared them with that predicted by a theoretical analysis. In addition, we have emulated the signals corresponding to different photon sources through a beam splitter, and obtained the photodetection statistics from which we determine, for each case, the second order correlation function g(2)(τ).

Anales/Anales AFA•Mar 28, 2023•1 citation
We report on an electronic coincidence detection circuit for quantum photonic applications implemented on a field-programmable gate array (FPGA), which records each the time separation between detection events coming from single-photon detectors. We achieve a coincidence window as narrow as 500 ps with a series of optimizations on a readily-available and affordable FPGA development board. Our implementation allows real-time visualization of coincidence measurements for multiple coincidence window widths simultaneously. To demonstrate the advantage of our high-resolution visualization, we certified the generation of polarized entangled photons by collecting data from multiple coincidence windows with minimal accidental counts, obtaining a violation of the Clauser-Horne-Shimony-Holt (CHSH) Bell inequality by more than 338 standard deviations. Our results have shown the applicability of our electronic design in the field of quantum information.
We present results characterizing multichannel InGaAs single photon detectors utilizing gated passive quenching circuits (GPQC), self-differencing techniques, and field programmable gate array (FPGA)-based logic for both diode gating and coincidence counting. Utilizing FPGAs for the diode gating frontend and the logic counting backend has the advantage of low cost compared to custom built logic circuits and current off-the-shelf detector technology. Further, FPGA logic counters have been shown to work well in quantum key distribution (QKD) test beds. Our setup combines multiple independent detector channels in a reconfigurable manner via an FPGA backend and post processing in order to perform coincidence measurements between any two or more detector channels simultaneously. Using this method, states from a multi-photon polarization entangled source are detected and characterized via coincidence counting on the FPGA. Photons detection events are also processed by the quantum information toolkit for application testing (QITKAT).
Coincidence counters play the role of gating events from the background noise in almost every quantum photonics setup. Precise multi-channel and high count-rate coincidence counting tools have become desirable due to an increase in the complexity of quantum photonics experiments. However, timing analyzers are struggling to meet these needs. We are proposing a Field Programmable Gate Array (FPGA) based coincidence counting system which provides 8 operational channels with 8.9 ps root mean square (RMS) resolution (with a bin width of 7.7 ps) and a count-rate of 320 million counts per second (MCPS) (with 40 MCPS per channel). We have successfully tested our design in different quantum photonics scenarios such as the detection of two-photon interference and pseudo-photon-number resolving detection of a coherent state of light where it has shown its capability of working beyond the saturation of detectors. Also, we have introduced a Dual Data Rate Registration TDC, which improved the linearity of the time tagging operation by using both clock edges without increasing the dead-time or using the space excessively. 1.2 LSB in max DNL error, 1.8 LSB in max INL error, 10 ps in FWHM and 3.2 ps in RMS resolution improvements were achieved.
Coincidence counting is widely used in quantum optics.It could be used in measuring the pairs of polarization entangled photons and single photon interference.In quantum experiments,coincidence counting often needs more than 3 channels.In this case,it is necessary to use FPGA(Field-Programmable Gate Array) instead of discrete logic chips.FPGA also has the advantage of low cost and small size.Coincidence counter based on FPGA could support coincidence time window from 1 ns to several hundred ns.This helps to avoid noised caused by background light.This paper introduces the principle of multi-channel coincidence counter based on FPGA and gives its performance experimentally with two single photon counting modules.
In this paper we present the data acquisition (DAQ) system for a multichannel coincidence photon counter where this DAQ is optimized for a small coincidence window, high speed data retrieving without reduction and parallel data processing. For single photon detection we use Avalanche Photodiodes (APD) which are practical tools for detection in quantum optics and photonics quantum information experiments. However they introduce noise into the measurements originating from their dark count detection and after pulsing. One way to limit this contribution is to decrease the time window in which the coincidence detection measurement is performed. We have developed this DAQ based entirely on a standard Field Programmable Gate Array (FPGA) where the width of the coincidence time window is in the sub-nanosecond range. The same unit is also responsible for sending the result to the User Interface (UI). The communication between the UI and the FPGA platform is through a single link Peripheral Component Interconnect Express (PCIe) by means of streaming DMA. Our DAQ is developed for Xilinx Spartan-6 devices but other devices are also supported. A Linux driver with all necessary functionality to communicate with the DAQ as well as the UI is also developed. The use of our unit can be extended for other detection counting physical systems.
Real-time analysis of single-photon coincidence is critical in photonic quantum computing. The large channel number and high counting rate foreseen in such experiments pose a big challenge for the conventional time tagged method and coincidence instruments. Here we propose a real-time time-tagged coincidence method and a data filtering solution, demonstrated by a 32-channel coincidence counting unit that has been implemented successfully on a field-programmable gate array system. The unit provides high counting rates, a tunable coincidence window, and a timing resolution of 390 ps. Beyond that, it is feasible to be scaled up to 104 channels and is thus ideally suited for channel consuming applications such as boson sampling. Based on the versatility and scalability the unit has shown, we believe that it is the turn-key solution for many single-photon coincidence counting applications in photonic quantum computing.
The detection of temporally coincident signals plays an important role in different technological applications for metrology and communication, and particularly, in the area of quantum optics. In this sense, the simultaneous detection of two or more photons allows one to take advantage of the non-classical features of light that manifest themselves in certain types of correlations that cannot be described classically. We present here the development of programmable modules, by using FPGA technology, which are part of the coincident pulse detection and counting system. Our implementation, in a development board from Xilinx, allows to determine when two or more pulses overlap within a temporal window, with a configurable width in the range of 1 and 255 ns to compensate for possible path differences. We obtained the photodetection statistics result of the single and coincident pulse measurements and compared them with that predicted by a theoretical analysis. In addition, we have emulated the signals corresponding to different photon sources through a beam splitter, and obtained the photodetection statistics from which we determine, for each case, the second order correlation function g(2)(τ).