Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Compact magneto-optical trap of thulium atoms for a transportable optical clock

Artem A. Golovizin, Dmitry O. Tregubov, D. Mishin, Daniil I. Provorchenko, N. Kolachevsky

Published Sep 3, 2021• 22 citations
Publisher

Abstract

We have developed a compact vacuum system for laser cooling and spectroscopy of neutral thulium atoms. Compactness is achieved by obviating a classical Zeeman slower section and placing an atomic oven close to a magneto-optical trap (MOT), specifically at the distance of 11 cm. In this configuration, we significantly gained in solid angle of an atomic beam, which is affected by MOT laser beams, and reached 1 million atoms loaded directly in the MOT with only 15 mW of MOT cooling beams net power. By exploiting Zeeman-like deceleration of atoms with an additional laser beam and tailoring the MOT magnetic field gradient with a small magnetic coil, we demonstrated trapping of up to 13 million atoms. These results show great perspective of the developed setup for realizing a compact high-performance optical atomic clock based on thulium atoms.

DOI
10.1364/oe.435105

Related papers

Efficient loading of thulium atoms in a compact MOT for a transportable optical clock

Artem A. Golovizin, Dmitry O. Tregubov, D. Mishin +2 more

We report on building of a compact vacuum chamber for spectroscopy of ultracold thulium and trapping of up to 13 million atoms. Compactness is achieved by obviating a classical Zeeman slower section and placing an atomic oven close to a magneto-optical trap (MOT), specifically at the distance of 11 cm. In this configuration, we significantly gained in solid angle of an atomic beam, which is affected by MOT laser beams, and reached 1 million atoms loaded directly in the MOT. By exploiting Zeeman-like deceleration of atoms with an additional laser beam, we increased the number of trapped atoms to 6 million. Then we gained an extra factor of 2 by tailoring the MOT magnetic field gradient with an additional small magnetic coil. Demonstrated results show great perspective of the developed setup for realizing a compact high-performance optical atomic clock based on thulium atoms.

arXiv:2105.02145•May 5, 2021•0 citations

Miniaturization of physics system in Sr optical clock

Zhao Fang-Jing, Gao Feng, 韩建新 HAN Jian-xin +6 more

The compactness and robustness of the vacuum setup are the major limitations to develop transportable and space-borne optical clocks. The first step in the engineering challenge is to reduce volume and weight with respect to a stationary system. In this paper, we present the realization of a miniaturized vacuum system by building two anti-Helmholtz coils inside the vacuum magneto-optical-trap (MOT) chamber. The built-in coils are specially designed to minimize the distance between the coils, and in this way it is possible to reduce the current needed to realize a typical magnetic gradient of 40 Gs/cm required for blue MOT. When the MOT coil current is 2 A, an axial magnetic field gradient of 43 Gs/cm is obtained in the center of the MOT, which is enough for the first stage Doppler cooling. This novel design allows us to reduce size, weight and power consumption with respect to a traditional laser cooling apparatus, and simultaneously avoid complicating the water cooling equipment. Our vacuum system has a size of 60 cm×20 cm×15 cm, about 1/10 of the original system in the laboratory. In addition, the circularly polarized Zeeman slowing laser is sent to counter propagating atomic beam, and atoms at a few hundred meters per second are now routinely slowed down to velocities of tens of meters per second. As a result, about 16.4% of the atoms are actually trapped into the blue MOT. The final temperature of the blue MOT is approximately 10.6 mK, and the internal diameter is 1.5 mm by observing the expansion of the atoms from the MOT. The populations of cold atoms finally trapped in the MOT are 1.6×106 of 88Sr and 1.5×105 of 87Sr. The 1S0 → 1P1 transition used for the blue MOT is not perfectly closed due to the decay channel of the 5p1P1 → 4d1D2, and a part of atoms are stored in the 3P2 and 3P0 states. To prevent the atoms from losing, 707 and 679 nm repumping lasers are employed to recycle these atoms in the 3P1 state, and then the atoms decay to the ground state 1S0. Now the typical number of loaded atoms dramatically increases by 5 times compared with before. The slowing efficiency of Zeeman slower is also optimized for the operation with deceleration related to the parameter of magnet length, which uses more effectively available magnetic field distribution, in contrast to the usual constant deceleration mode. Our future work will focus on constructing a Zeeman slower combined with permanent magnets or an electric magnet for better tuning of the magnetic field.

Acta Physica Sinica•Jan 1, 2018•4 citations

Calcium magneto-optical trap loaded from a decelerated atomic beam

Reinaldo L. Cavasso Filho, Daniela A. Manoel, Davi R. Ortega +3 more

We describe a new system for laser cooling and trapping of neutral Calcium atoms employing the ¹S0 -¹ P1 resonant transition at 423 nm. An on-axis magneto-optical trap (MOT) is loaded from a Zeeman decelerated atomic beam. When a single laser is used, in order to avoid perturbation of the trap by the deceleration laser beam, this one has been tightly focused near the MOT center, with a waist size much smaller than the atomic cloud. In order to test the efficiency of this novel technique, we have then employed a second, independent decelerating laser, with a profile mode matched to the atomic beam. For an oven temperature of 580±C this system can load 1.2 (2) x 10(7) atoms in 16 (1) ms. By the spatial extension of the atomic cloud the one dimension rms velocity was estimated to be 136 (12) cm/s, corresponding to a temperature of 9 (2) mK. The variation of the number of trapped atoms as a function of laser detuning and intensity, trap magnetic field gradient and oven temperature is analyzed. Spatial structures of the trapped atoms, like stable rings created by vortex forces, have been observed. This is the first time that these structures, already observed in alkali-metal elements, are reported in MOTs of alkaline-earth elements.

Brazilian Journal of Physics•Jun 1, 2003•3 citations

Miniaturized setups for magneto-optical trapping of ytterbium and strontium

Julian Pick, Julia Voß, Florian Löwinger +6 more

Optical lattice clocks based on ytterbium (Yb) and strontium (Sr) are emerging as key technologies in precision timekeeping and metrology. Recent advancements in miniaturization and transportability are making them increasingly accessible for applications outside traditional laboratory settings. However, the degree of miniaturization is limited by the atomic source that is used to provide laser-cooled atoms for the clock spectroscopy. Conventional atomic sources for optical lattice clocks consist of a high-power oven and a magneto-optical trap (MOT) that requires six incident laser beams for three-dimensional trapping and cooling. Here, we present technologies that allow a significant miniaturization of the required experimental setups to realize a MOT for Yb and Sr. These are a chip-based microstructured atomic oven and in-vacuum optical elements that require only a single incident laser beam to generate all of the required beams for three-dimensional trapping and cooling. The oven was manufactured with LIDE® (laser induced deep etching). It was paired with an aluminum pyramid reflector to load Yb atoms into a MOT. The oven was placed directly at the outside of the reflector, forming a compact setup that is used for atom evaporation and direct trapping and cooling. In this configuration, MOT loading rates above 10^8 atoms/s were measured for oven heating powers below 250 mW. Furthermore, the microstructured oven was paired with a grating MOT chip inside a highly compact vacuum chamber. The chamber was additively manufactured from titanium and the assembled setup spans a volume of less than 750 ml. In this setup, up to 10^5 Sr atoms were trapped in the MOT.

•Jan 1, 2026•0 citations

Zeeman slowing of thulium atoms

K. Chebakov, A. Sokolov, A. Akimov +4 more

We demonstrate laser slowing of a hot thulium atomic beam using the nearly closed cycling transition 4f(13)6s(2)((2)F(o))(J=7/2)<-->4f(12)((3)H(5))5d(3/2)6s(2)(J=9/2) at 410.6 nm. Atoms are decelerated to velocities around 25 m/s by a 40 cm Zeeman slower. The flux of slowed atoms is evaluated as 10(7) s(-1)cm(-2). The experiment explicitly indicates the possibility of trapping Tm atoms in a magneto-optical trap.

arXiv:0905.2402•Optics Letters•Sep 22, 2009•13 citations

Second-Stage Laser Cooling of Ytterbium Atoms without Using a First-Stage Magneto-Optical Trap

Anton P. Vyalykh, Anastasia V. Semenko, A. V. Kohanov +2 more

A compact laser cooling system for transportable optical lattice clocks based on cold 171 Yb atoms has been presented. The system size has been reduced by eliminating the first cooling stage and using compact configurations for the main subsystems of the laser cooling system. A Zeeman slower has been modeled and developed, reducing the velocity of atoms from a thermal source to a level sufficient for their direct capture in a second-stage magneto-optical trap, avoiding the first cooling stage. A method for estimating the number of atoms and their temperature in the magneto-optical trap is presented. The performance of the compact laser cooling system with the developed Zeeman slower has been experimentally confirmed: ~10 6 171 Yb atoms with a temperature of ~35 μK have been collected in ~1 s. The achieved parameters allow for loading of ~4000 atoms into the optical lattice.

Journal of Experimental and Theoretical Physics Letters•Jun 1, 2026•0 citations
We have developed a compact vacuum system for laser cooling and spectroscopy of neutral thulium atoms. Compactness is achieved by obviating a classical Zeeman slower section and placing an atomic oven close to a magneto-optical trap (MOT), specifically at the distance of 11 cm. In this configuration, we significantly gained in solid angle of an atomic beam, which is affected by MOT laser beams, and reached 1 million atoms loaded directly in the MOT with only 15 mW of MOT cooling beams net power. By exploiting Zeeman-like deceleration of atoms with an additional laser beam and tailoring the MOT magnetic field gradient with a small magnetic coil, we demonstrated trapping of up to 13 million atoms. These results show great perspective of the developed setup for realizing a compact high-performance optical atomic clock based on thulium atoms.
We report on building of a compact vacuum chamber for spectroscopy of ultracold thulium and trapping of up to 13 million atoms. Compactness is achieved by obviating a classical Zeeman slower section and placing an atomic oven close to a magneto-optical trap (MOT), specifically at the distance of 11 cm. In this configuration, we significantly gained in solid angle of an atomic beam, which is affected by MOT laser beams, and reached 1 million atoms loaded directly in the MOT. By exploiting Zeeman-like deceleration of atoms with an additional laser beam, we increased the number of trapped atoms to 6 million. Then we gained an extra factor of 2 by tailoring the MOT magnetic field gradient with an additional small magnetic coil. Demonstrated results show great perspective of the developed setup for realizing a compact high-performance optical atomic clock based on thulium atoms.
The compactness and robustness of the vacuum setup are the major limitations to develop transportable and space-borne optical clocks. The first step in the engineering challenge is to reduce volume and weight with respect to a stationary system. In this paper, we present the realization of a miniaturized vacuum system by building two anti-Helmholtz coils inside the vacuum magneto-optical-trap (MOT) chamber. The built-in coils are specially designed to minimize the distance between the coils, and in this way it is possible to reduce the current needed to realize a typical magnetic gradient of 40 Gs/cm required for blue MOT. When the MOT coil current is 2 A, an axial magnetic field gradient of 43 Gs/cm is obtained in the center of the MOT, which is enough for the first stage Doppler cooling. This novel design allows us to reduce size, weight and power consumption with respect to a traditional laser cooling apparatus, and simultaneously avoid complicating the water cooling equipment. Our vacuum system has a size of 60 cm×20 cm×15 cm, about 1/10 of the original system in the laboratory. In addition, the circularly polarized Zeeman slowing laser is sent to counter propagating atomic beam, and atoms at a few hundred meters per second are now routinely slowed down to velocities of tens of meters per second. As a result, about 16.4% of the atoms are actually trapped into the blue MOT. The final temperature of the blue MOT is approximately 10.6 mK, and the internal diameter is 1.5 mm by observing the expansion of the atoms from the MOT. The populations of cold atoms finally trapped in the MOT are 1.6×106 of 88Sr and 1.5×105 of 87Sr. The 1S0 → 1P1 transition used for the blue MOT is not perfectly closed due to the decay channel of the 5p1P1 → 4d1D2, and a part of atoms are stored in the 3P2 and 3P0 states. To prevent the atoms from losing, 707 and 679 nm repumping lasers are employed to recycle these atoms in the 3P1 state, and then the atoms decay to the ground state 1S0. Now the typical number of loaded atoms dramatically increases by 5 times compared with before. The slowing efficiency of Zeeman slower is also optimized for the operation with deceleration related to the parameter of magnet length, which uses more effectively available magnetic field distribution, in contrast to the usual constant deceleration mode. Our future work will focus on constructing a Zeeman slower combined with permanent magnets or an electric magnet for better tuning of the magnetic field.
We describe a new system for laser cooling and trapping of neutral Calcium atoms employing the ¹S0 -¹ P1 resonant transition at 423 nm. An on-axis magneto-optical trap (MOT) is loaded from a Zeeman decelerated atomic beam. When a single laser is used, in order to avoid perturbation of the trap by the deceleration laser beam, this one has been tightly focused near the MOT center, with a waist size much smaller than the atomic cloud. In order to test the efficiency of this novel technique, we have then employed a second, independent decelerating laser, with a profile mode matched to the atomic beam. For an oven temperature of 580±C this system can load 1.2 (2) x 10(7) atoms in 16 (1) ms. By the spatial extension of the atomic cloud the one dimension rms velocity was estimated to be 136 (12) cm/s, corresponding to a temperature of 9 (2) mK. The variation of the number of trapped atoms as a function of laser detuning and intensity, trap magnetic field gradient and oven temperature is analyzed. Spatial structures of the trapped atoms, like stable rings created by vortex forces, have been observed. This is the first time that these structures, already observed in alkali-metal elements, are reported in MOTs of alkaline-earth elements.
Optical lattice clocks based on ytterbium (Yb) and strontium (Sr) are emerging as key technologies in precision timekeeping and metrology. Recent advancements in miniaturization and transportability are making them increasingly accessible for applications outside traditional laboratory settings. However, the degree of miniaturization is limited by the atomic source that is used to provide laser-cooled atoms for the clock spectroscopy. Conventional atomic sources for optical lattice clocks consist of a high-power oven and a magneto-optical trap (MOT) that requires six incident laser beams for three-dimensional trapping and cooling. Here, we present technologies that allow a significant miniaturization of the required experimental setups to realize a MOT for Yb and Sr. These are a chip-based microstructured atomic oven and in-vacuum optical elements that require only a single incident laser beam to generate all of the required beams for three-dimensional trapping and cooling. The oven was manufactured with LIDE® (laser induced deep etching). It was paired with an aluminum pyramid reflector to load Yb atoms into a MOT. The oven was placed directly at the outside of the reflector, forming a compact setup that is used for atom evaporation and direct trapping and cooling. In this configuration, MOT loading rates above 10^8 atoms/s were measured for oven heating powers below 250 mW. Furthermore, the microstructured oven was paired with a grating MOT chip inside a highly compact vacuum chamber. The chamber was additively manufactured from titanium and the assembled setup spans a volume of less than 750 ml. In this setup, up to 10^5 Sr atoms were trapped in the MOT.
A compact laser cooling system for transportable optical lattice clocks based on cold 171 Yb atoms has been presented. The system size has been reduced by eliminating the first cooling stage and using compact configurations for the main subsystems of the laser cooling system. A Zeeman slower has been modeled and developed, reducing the velocity of atoms from a thermal source to a level sufficient for their direct capture in a second-stage magneto-optical trap, avoiding the first cooling stage. A method for estimating the number of atoms and their temperature in the magneto-optical trap is presented. The performance of the compact laser cooling system with the developed Zeeman slower has been experimentally confirmed: ~10 6 171 Yb atoms with a temperature of ~35 μK have been collected in ~1 s. The achieved parameters allow for loading of ~4000 atoms into the optical lattice.