Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Experimental and Theoretical Physics Letters

Second-Stage Laser Cooling of Ytterbium Atoms without Using a First-Stage Magneto-Optical Trap

Anton P. Vyalykh, Anastasia V. Semenko, A. V. Kohanov, V. G. Pal'chikov, G S Belotelov

Published Jun 1, 2026• 0 citations
Publisher

Abstract

A compact laser cooling system for transportable optical lattice clocks based on cold 171 Yb atoms has been presented. The system size has been reduced by eliminating the first cooling stage and using compact configurations for the main subsystems of the laser cooling system. A Zeeman slower has been modeled and developed, reducing the velocity of atoms from a thermal source to a level sufficient for their direct capture in a second-stage magneto-optical trap, avoiding the first cooling stage. A method for estimating the number of atoms and their temperature in the magneto-optical trap is presented. The performance of the compact laser cooling system with the developed Zeeman slower has been experimentally confirmed: ~10 6 171 Yb atoms with a temperature of ~35 μK have been collected in ~1 s. The achieved parameters allow for loading of ~4000 atoms into the optical lattice.

DOI
10.1134/s0021364026601454

Related papers

Setup of a Transportable Yb Optical Lattice Clock

C. Abou-Jaoudeh

In this thesis, a transportable setup of an Yb atomic source for a lattice optical clock is built and characterized. All three laser setups for cooling and trapping the Yb atoms, together with the vacuum system, are contained on a transportable optical table. The preparation of the atomic sample before doing spectroscopy on the clock transition starts by slowing the atoms in the Zeeman slower. This is followed by trapping the atoms in the pre-cooling and the post-cooling MOTs, before loading the atoms into the optical lattice. Slowing and pre-cooling the atoms is done using the strong transition at 399 nm. This cools the atoms down to around a mK. To successfully load the atoms in the optical lattice, we have to cool the atoms further to beyond 50 μK. This is done by exciting the weak transition at 556 nm. The atoms that are transferred into the post-cooling stage are cooled down to a few tens of μK. The atoms are then ready to be loaded into the optical lattice at the magic wavelength. The amplified laser light at 760 nm inside the 1-D intra-vacuum cavity results in a lattice trapping potential of approximately 50 μK. A transfer efficiency, from the MOT into the optical lattice, of more than 25% was measured. The spectroscopy on the clock transition was done for 171Yb. A step-by-step mechanism was adopted, starting by exciting the forbidden transition at 578 nm inside the post-cooling stage MOT, by using the ”chopped-MOT” method. The 300 kHz Doppler-broadened line is then narrowed down to 3 kHz by switching on the light at 760 nm, while keeping the MOT on. The so-called ”chopped-lattice” technique helped suppress the Doppler-broadening; however the other effects due to the light and the magnetic fields of the MOT were still present. By switching off the MOT’s light and magnetic fields, the Yb atoms are completely trapped in the optical lattice. As a result, the FWHM of the spectroscopy line was reduced by a factor of 10.

•Jan 1, 2016•0 citations

Experiments on trapping ytterbium atoms in optical lattices

Min Zhou, Ning Chen, Xiaohang Zhang +7 more

Experiments on trapping ytterbium atoms in various optical lattices are presented. After the two-stage cooling, first in a blue magneto—optical trap and then in a green magneto—optical trap, the ultracold 171 Yb atoms are successfully loaded into one-, two-, and three-dimensional optical lattices operating at the Stark-free wavelength, respectively. The temperature, number, and lifetime of cold 171 Yb atoms in one-dimensional lattice are measured. After optimization, the one-dimensional lattice with cold 171 Yb atoms is used for developing an ytterbium optical clock.

Chinese Physics B•Oct 1, 2013•14 citations

Laser-Controlled Cold Ytterbium Atom Source for Transportable Optical Clocks

Masami Yasuda, Takehiko Tanabe, Takumi Kobayashi +3 more

We demonstrate the cold emission of ytterbium atomic vapors from ytterbium oxide irradiated with a simple ultraviolet diode laser. Slow atoms are trapped by a magneto-optical trap using a dipole-allowed transition at 399 nm. The number of trapped atoms is larger than those loaded from a conventional Zeeman slower. This method will open the way for the development of a compact apparatus suited for transportable optical clocks and other applications.

Journal of the Physical Society of Japan•Nov 28, 2017•13 citations

Magneto-Optical Trapping of Ytterbium Atoms with a 398.9 nm Laser

Zhao Peng-Yi, Xiong Zhuan-Xian, Jie Liang +2 more

We report the realization of ytterbium magneto-optical trap (MOT) operating on the dipole-allowed 1 S 0 — 1 P 1 transition at 398.9 nm. The MOT is loaded by a slowed atomic beam produced by a Zeeman slower. All seven stable isotopes of Yb atoms could be trapped separately at different laser detuning values. Over 10 7 174 Yb atoms are collected in the MOT, whereas the atom number of fermionic isotope 171 Yb is roughly 2.3 × 10 6 due to a lower abundance. Without the Zeeman slower, the trapped atom numbers are one order of magnitude lower. Both the even and odd isotopes are recognized as excellent candidates of optical clock transition, so the cooling and trapping of ytterbium atoms by the blue MOT is an important step for building an optical clock.

Chinese Physics Letters•Oct 1, 2008•16 citations

Compact magneto-optical trap of thulium atoms for a transportable optical clock

Artem A. Golovizin, Dmitry O. Tregubov, D. Mishin +2 more

We have developed a compact vacuum system for laser cooling and spectroscopy of neutral thulium atoms. Compactness is achieved by obviating a classical Zeeman slower section and placing an atomic oven close to a magneto-optical trap (MOT), specifically at the distance of 11 cm. In this configuration, we significantly gained in solid angle of an atomic beam, which is affected by MOT laser beams, and reached 1 million atoms loaded directly in the MOT with only 15 mW of MOT cooling beams net power. By exploiting Zeeman-like deceleration of atoms with an additional laser beam and tailoring the MOT magnetic field gradient with a small magnetic coil, we demonstrated trapping of up to 13 million atoms. These results show great perspective of the developed setup for realizing a compact high-performance optical atomic clock based on thulium atoms.

Optics Express•Sep 3, 2021•22 citations

Atom Chip and Diffraction Grating for the Laser Cooling of Ytterbium Atoms

Anton P. Vyalykh, P. I. Skakunenko, M. V. Shishova +5 more

The possibility of using an atom chip and a diffraction grating to form a compact magneto-optical trap for ytterbium atoms, which can be used to develop compact atomic interferometers and optical clocks based on ultracold atoms, has been studied. An experiment on the laser cooling of the 171Yb and 174Yb isotopes in a first‑stage magneto-optical trap has been carried out to determine initial requirements for the mentioned elements. The design of the atom chip forming a magnetic field gradient up to 60 G/cm has been calculated. The optimal configurations of the diffraction grating that allow forming both the first- and second-stage magneto-optical traps have been evaluated.

Journal of Experimental and Theoretical Physics Letters•Feb 1, 2024•7 citations
A compact laser cooling system for transportable optical lattice clocks based on cold 171 Yb atoms has been presented. The system size has been reduced by eliminating the first cooling stage and using compact configurations for the main subsystems of the laser cooling system. A Zeeman slower has been modeled and developed, reducing the velocity of atoms from a thermal source to a level sufficient for their direct capture in a second-stage magneto-optical trap, avoiding the first cooling stage. A method for estimating the number of atoms and their temperature in the magneto-optical trap is presented. The performance of the compact laser cooling system with the developed Zeeman slower has been experimentally confirmed: ~10 6 171 Yb atoms with a temperature of ~35 μK have been collected in ~1 s. The achieved parameters allow for loading of ~4000 atoms into the optical lattice.
In this thesis, a transportable setup of an Yb atomic source for a lattice optical clock is built and characterized. All three laser setups for cooling and trapping the Yb atoms, together with the vacuum system, are contained on a transportable optical table. The preparation of the atomic sample before doing spectroscopy on the clock transition starts by slowing the atoms in the Zeeman slower. This is followed by trapping the atoms in the pre-cooling and the post-cooling MOTs, before loading the atoms into the optical lattice. Slowing and pre-cooling the atoms is done using the strong transition at 399 nm. This cools the atoms down to around a mK. To successfully load the atoms in the optical lattice, we have to cool the atoms further to beyond 50 μK. This is done by exciting the weak transition at 556 nm. The atoms that are transferred into the post-cooling stage are cooled down to a few tens of μK. The atoms are then ready to be loaded into the optical lattice at the magic wavelength. The amplified laser light at 760 nm inside the 1-D intra-vacuum cavity results in a lattice trapping potential of approximately 50 μK. A transfer efficiency, from the MOT into the optical lattice, of more than 25% was measured. The spectroscopy on the clock transition was done for 171Yb. A step-by-step mechanism was adopted, starting by exciting the forbidden transition at 578 nm inside the post-cooling stage MOT, by using the ”chopped-MOT” method. The 300 kHz Doppler-broadened line is then narrowed down to 3 kHz by switching on the light at 760 nm, while keeping the MOT on. The so-called ”chopped-lattice” technique helped suppress the Doppler-broadening; however the other effects due to the light and the magnetic fields of the MOT were still present. By switching off the MOT’s light and magnetic fields, the Yb atoms are completely trapped in the optical lattice. As a result, the FWHM of the spectroscopy line was reduced by a factor of 10.
Experiments on trapping ytterbium atoms in various optical lattices are presented. After the two-stage cooling, first in a blue magneto—optical trap and then in a green magneto—optical trap, the ultracold 171 Yb atoms are successfully loaded into one-, two-, and three-dimensional optical lattices operating at the Stark-free wavelength, respectively. The temperature, number, and lifetime of cold 171 Yb atoms in one-dimensional lattice are measured. After optimization, the one-dimensional lattice with cold 171 Yb atoms is used for developing an ytterbium optical clock.
We report the realization of ytterbium magneto-optical trap (MOT) operating on the dipole-allowed 1 S 0 — 1 P 1 transition at 398.9 nm. The MOT is loaded by a slowed atomic beam produced by a Zeeman slower. All seven stable isotopes of Yb atoms could be trapped separately at different laser detuning values. Over 10 7 174 Yb atoms are collected in the MOT, whereas the atom number of fermionic isotope 171 Yb is roughly 2.3 × 10 6 due to a lower abundance. Without the Zeeman slower, the trapped atom numbers are one order of magnitude lower. Both the even and odd isotopes are recognized as excellent candidates of optical clock transition, so the cooling and trapping of ytterbium atoms by the blue MOT is an important step for building an optical clock.
We have developed a compact vacuum system for laser cooling and spectroscopy of neutral thulium atoms. Compactness is achieved by obviating a classical Zeeman slower section and placing an atomic oven close to a magneto-optical trap (MOT), specifically at the distance of 11 cm. In this configuration, we significantly gained in solid angle of an atomic beam, which is affected by MOT laser beams, and reached 1 million atoms loaded directly in the MOT with only 15 mW of MOT cooling beams net power. By exploiting Zeeman-like deceleration of atoms with an additional laser beam and tailoring the MOT magnetic field gradient with a small magnetic coil, we demonstrated trapping of up to 13 million atoms. These results show great perspective of the developed setup for realizing a compact high-performance optical atomic clock based on thulium atoms.
The possibility of using an atom chip and a diffraction grating to form a compact magneto-optical trap for ytterbium atoms, which can be used to develop compact atomic interferometers and optical clocks based on ultracold atoms, has been studied. An experiment on the laser cooling of the 171Yb and 174Yb isotopes in a first‑stage magneto-optical trap has been carried out to determine initial requirements for the mentioned elements. The design of the atom chip forming a magnetic field gradient up to 60 G/cm has been calculated. The optimal configurations of the diffraction grating that allow forming both the first- and second-stage magneto-optical traps have been evaluated.