Peculiarities of RSFQ applications with high-T c superconductors - an approach for design

Sergey V. Pflyuk

Agnès Roussy, S. Karthikeyan, Ingrid Oomen +4 more

One of the remaining challenges in the application of superconducting electronics is the interfacing between superconducting and semiconducting environments. The voltage and speed mismatch between RSFQ pulses and semiconducting read-out electronics makes it necessary to amplify as well as stretch the RSFQ pulses. Moreover, circuits based on HTS (High Temperature Superconductor) technology are very attractive since they can operate under considerably relaxed cooling effort, which is one of the main problems with LTS (Low Temperature Superconductor) circuits. Within the European project SuperADC, a HTS second order sigma delta modulator and a pulse stretcher, used as an interface between the modulator and the first semi-conducting amplifier stage, have been designed at Twente University and will be presented here.

Riaan Du Toit

ENGLISH ABSTRACT: The Applications of Superconductors in Cellular Network Base Stations R. Du Toit Department of Electronic Engineering University of Stellenbosch Private Bag X1, 7602 Matieland, South Africa Thesis: MScEng (E&E) March 2008 Wireless communications have increasingly become part of our world. The growth of radio frequency (RF) wireless communications has led to an increasing demand for frequency spectrum licenses, increased system capacity and larger user bandwidths. These demands lead to frequent improvements on the physical and higher layers of wireless communication protocols. Changes in the physical layer are frequently followed by the need for replacement of dedicated hardware components. The need therefore exists for a more general and programmable physical layer. A more general and programmable radio architecture implies increased radio front-end performance without losing programmability. The contribution of this thesis is the analysis of how superconductor electronics (SCE) using Rapid Single Flux Quantum (RSFQ) logic may advance wireless radio front-ends by providing a general-purpose programmable radio architecture. Superconductor analogue to digital converters (ADCs) are employed as high performance, programmable digitization structures. Once a received signal is digitized, SCE can be used to rapidly do recursive operations such as synchronization and multi-path delay estimation. These operations are based on correlation, and for evaluation of such operations with SCE the popular CDMA multiplexing method is studied along with the WCDMA protocol used in the 3G UMTS standard. Two delta-type oversampling superconductor ADC modulator designs are presented and evaluated along with a hybrid decimation filter design, using both the benefits of SCE and room temperature electronics. A fast RSFQ correlator design is also presented and evaluated for use in a multi-path estimation structure. A rapid multi-path delay estimation architecture based on fast RSFQ circular data buffers and correlators is presented. The architecture uses the fast speeds of RSFQ logic to obtain accurate path delay estimates in a rapidly changing wireless environment. It is concluded that RSFQ-based wireless receiver components offer promising new options for data conversion, correlation and multi-path delay estimation implementations.

Hannes Toepfer, Thomas Ortlepp, Hermann F. Uhlmann +2 more

Ruben van Staden, Kyle Jackman, Coenrad Johann Fourie +1 more

Thomas Ortlepp, Hermann F. Uhlmann

In the design of electronic applications (for example, rapid single flux quantum (RSFQ) circuits), the properties of Josephson junctions (JJs) provided by technology are the major requirement. The characteristic voltage IcRn an dt he dynamic parameter βc are non-negligibly important, bu tt he external shunted junctions are only completely described by including the parasitic inductance between the junction area and the shunt resistor. The first publications of the RSFQ circuit technique were closely followed by many studies on the dynamic influence of this inductance. It has been pointed out that no practical value of this parameter has to be taken into account in the circuit design and optimization process. The operation of RSFQ logic circuits made of high-temperature superconductors (HTS) are strongly influenced by thermal noise. Our paper contains the determination of the digital bit-error rate for all different types of JJs by using a Fokker–Planck equation for describing the influence of thermal fluctuations. Ou ra nalysis shows that the parasitic inductance cannot be neglected in terms of noise. The intrinsic shunted junctions like high current density-, SINIS- and all kinds of HTS-JJs provide the best noise immunity for a fixed temperature.