ENGLISH ABSTRACT: The Applications of Superconductors in Cellular Network Base Stations R. Du Toit Department of Electronic Engineering University of Stellenbosch Private Bag X1, 7602 Matieland, South Africa Thesis: MScEng (E&E) March 2008 Wireless communications have increasingly become part of our world. The growth of radio frequency (RF) wireless communications has led to an increasing demand for frequency spectrum licenses, increased system capacity and larger user bandwidths. These demands lead to frequent improvements on the physical and higher layers of wireless communication protocols. Changes in the physical layer are frequently followed by the need for replacement of dedicated hardware components. The need therefore exists for a more general and programmable physical layer. A more general and programmable radio architecture implies increased radio front-end performance without losing programmability. The contribution of this thesis is the analysis of how superconductor electronics (SCE) using Rapid Single Flux Quantum (RSFQ) logic may advance wireless radio front-ends by providing a general-purpose programmable radio architecture. Superconductor analogue to digital converters (ADCs) are employed as high performance, programmable digitization structures. Once a received signal is digitized, SCE can be used to rapidly do recursive operations such as synchronization and multi-path delay estimation. These operations are based on correlation, and for evaluation of such operations with SCE the popular CDMA multiplexing method is studied along with the WCDMA protocol used in the 3G UMTS standard. Two delta-type oversampling superconductor ADC modulator designs are presented and evaluated along with a hybrid decimation filter design, using both the benefits of SCE and room temperature electronics. A fast RSFQ correlator design is also presented and evaluated for use in a multi-path estimation structure. A rapid multi-path delay estimation architecture based on fast RSFQ circular data buffers and correlators is presented. The architecture uses the fast speeds of RSFQ logic to obtain accurate path delay estimates in a rapidly changing wireless environment. It is concluded that RSFQ-based wireless receiver components offer promising new options for data conversion, correlation and multi-path delay estimation implementations.
ENGLISH ABSTRACT: The Applications of Superconductors in Cellular Network Base Stations R. Du Toit Department of Electronic Engineering University of Stellenbosch Private Bag X1, 7602 Matieland, South Africa Thesis: MScEng (E&E) March 2008 Wireless communications have increasingly become part of our world. The growth of radio frequency (RF) wireless communications has led to an increasing demand for frequency spectrum licenses, increased system capacity and larger user bandwidths. These demands lead to frequent improvements on the physical and higher layers of wireless communication protocols. Changes in the physical layer are frequently followed by the need for replacement of dedicated hardware components. The need therefore exists for a more general and programmable physical layer. A more general and programmable radio architecture implies increased radio front-end performance without losing programmability. The contribution of this thesis is the analysis of how superconductor electronics (SCE) using Rapid Single Flux Quantum (RSFQ) logic may advance wireless radio front-ends by providing a general-purpose programmable radio architecture. Superconductor analogue to digital converters (ADCs) are employed as high performance, programmable digitization structures. Once a received signal is digitized, SCE can be used to rapidly do recursive operations such as synchronization and multi-path delay estimation. These operations are based on correlation, and for evaluation of such operations with SCE the popular CDMA multiplexing method is studied along with the WCDMA protocol used in the 3G UMTS standard. Two delta-type oversampling superconductor ADC modulator designs are presented and evaluated along with a hybrid decimation filter design, using both the benefits of SCE and room temperature electronics. A fast RSFQ correlator design is also presented and evaluated for use in a multi-path estimation structure. A rapid multi-path delay estimation architecture based on fast RSFQ circular data buffers and correlators is presented. The architecture uses the fast speeds of RSFQ logic to obtain accurate path delay estimates in a rapidly changing wireless environment. It is concluded that RSFQ-based wireless receiver components offer promising new options for data conversion, correlation and multi-path delay estimation implementations.
Superconducting digital technology based on Rapid Single Flux Quantum logic (RSFQ) is a digital technology characterized by high speed, low power consumption and low operational temperatures. RSFQ is attractive for many applications and in particular for high frequency Digital Signal Processing (DSP) and for digital control of mK devices like superconducting qubits. Due to the 30 GHz clock speed, RSFQ DSP could be used to implement a Successive Interference Canceller for multi-user detection in a 3G wireless systems. The being developed DSP consists of a digital core, an RSFQ Multiply Accumulate unit (MAC), RSFQ fast cache memory and external semiconductor memory.The first part of this thesis is focusing on architecture and implementation of the hierarchical CMOS-RSFQ hybrid memory for the RSFQ DSP. The architecture ofthe RSFQ cache is optimized in order to reach the highest speed and reliable data communication with CMOS memory. Aspects of block synchronization betweenthe RSFQ cache and the RSFQ digital core are discussed and solved using a new developed RSFQ gate, C3. For design of different components of the DSP, a designapproach based on validated VHDL models is proposed and experimentally verified.The second part of this thesis is focusing on the design oflow-dissipative RSFQ circuits for interface to the superconducting qubits. Power dissipation ofRSFQ circuits is minimized. A low-temperature thermal model of resistively shunted Josephsonjunctions is developed and applied to optimize the shape of the shunt resistors in order to reduce their electron temperature. Depending on the available fabricationprocess the lowest noise temperature of RSFQ circuit can be in the range from 90 mK to 180 mK.
A wide variety of applications, ranging from radio-frequency (RF) receivers for broadband communications and signal detection, on earth and in space, would benefit from high-performance superconductor analog-to-digital converters (ADCs), based on magnetic flux quantization and fast switching Josephson junctions. Superconductor ADCs are capable of very high sample rates (100 GHz or more), very high linearity, and high sensitivity. Nyquist-rate ADCs use the high sample rate to digitize a wide instantaneous bandwidth (tens of GHz) and are useful for wideband spectrum monitoring as well as high-end scientific instrumentation. Delta and delta-sigma oversampling ADCs use the high linearity to achieve programmable trade-off between dynamic range and instantaneous bandwidth. These lowpass and bandpass ADCs have been used for direct digitization of narrower (tens to hundreds of MHz) RF bands in the 1-20 GHz range for a variety of communications, intelligence, electronic warfare, and radar applications. Another application area of these cryogenic ADCs is for outputs of cryogenic sensor arrays and terahertz mixers. Recent advances in various classes of ADCs for different applications are described.
Ultra fast switching speed of superconducting digital circuits enable realization of Digital Signal Processors with performance unattainable by any other technology. Based on rapid-single-flux technology (RSFQ) logic, these integrated circuits are capable of delivering high computation capacity up to 30 GOPS on a single processor and very short latency of 0.1ns. There are two main applications of such hardware for practical telecommunication systems: filters for superconducting ADCs operating with digital RF data and recursive filters at baseband. The later of these allows functions such as multiuser detection for 3G WCDMA, equalization and channel precoding for 4G OFDM MIMO, and general blind detection. The performance gain is an increase in the cell capacity, quality of service, and transmitted data rate. The current status of the development of the RSFQ baseband DSP is discussed. Major components with operating speed of 30GHz have been developed. Designs, test results, and future development of the complete systems including cryopackaging and CMOS interface are reviewed.
Ultrafast switching speed, low power, natural quantization of magnetic flux, quantum accuracy, and low noise of cryogenic superconductor circuits enable fast and accurate data conversion between the analog and digital domains. Based on rapid single-flux quantum (RSFQ) logic, these integrated circuits are capable of achieving performance levels unattainable by any other technology. Two major classes of superconductor analog-to-digital converters (ADCs) are being developed - Nyquist sampling and oversampling converters. Complete systems with digital sampling at rates of /spl sim/20 GHz and above have been demonstrated using low-temperature superconductor device technology. Some ADC components have also been implemented using high-temperature superconductors. Superconductor ADCs have unique applications in true digital-RF communications, broadband instrumentation, and digital sensor readout. Their designs, test results, and future development trends are reviewed.
Ultra fast switching speed of superconducting\ndigital circuits enable realization of Digital Signal Processors with performance unattainable by any other technology. Based on Rapid-Single-Flux technology (RSFQ) logic, these integrated circuits are capable of delivering high computation capacity up to 30 GOPS on a single processor and very short latency of 0.1 ns. There are two main applications of such hardware for practical telecommunication systems: Filters for superconducting ADCs\noperating with digital RF data and recursive Filters at baseband. The later of these allows functions such as multiuser detection for 3G WCDMA, equalization and channel precoding for 4G OFDM MIMO, and general blind detection. The performance gain is an increase in the cell capacity, quality of service, and transmitted data rate. The current status of the development of the RSFQ baseband DSP is discussed. Major components with operating speed of 30 GHz have been developed. Designs, test results, and future development of the complete system.
We present results of a preliminary analysis of possible front-ends of a software defined radio base station receiver containing superconductor Rapid Single-Flux-Quantum (RSFQ) components. The main component of such a front-end, an oversampling analog-to-digital converter (ADC) with expected internal clock rate up to 20 GHz has already been developed and fabricated with commercially available 3.5-/spl mu/m, 1-kA/cm/sup 2/ niobium-trilayer technology. Simulations show that, even with such crude feature size, the superconductor ADC components can outperform their semiconductor counterparts.