Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics

Waveguide Resonators for Optical Squeezing

Michael Stefszky, Matteo Santandrea, Felix vom Bruch, Christof Eigner, Raimund Ricken, Viktor Quiring, Harald Herrmann, Christine Silberhorn

Published Jan 1, 2021• 0 citations
Publisher

Abstract

An integrated source of squeezed states is required for many quantum optics applications. We present a 1cm long Ti:LiNbO3 waveguide resonator producing up to 4.9dB of single-mode squeezing and efforts towards incorporating an electro-optic modulator into the device.
DOI
10.1364/cleo_at.2021.am1s.4

Related papers

Waveguide Cavity Resonator as a Source of Optical Squeezing

Michael Stefszky, R. Ricken, Christof Eigner +3 more

``Squeezed'' states of light are the fundamental building blocks for continuous-variable quantum optics, so a quantum network for optical communication would seem to require a compact, efficient source of such states. Combining clever design with recent advances in waveguide materials engineering, the authors produce a device that yields very high levels of squeezing, compared to other integrated architectures. Their innovative approach allows for rarely seen continuous-wave squeezing, paving the way for more advanced on-chip functions.

arXiv:1702.02855•Physical Review Applied•Apr 27, 2017•52 citations

Lithium niobate waveguide squeezer with integrated cavity length stabilisation for network applications

Michael Stefszky, Felix vom Bruch, Matteo Santandrea +5 more

We report a titanium indiffused waveguide resonator featuring an integrated electro-optic modulator for cavity length stabilisation that produces close to 5 dB of squeezed light at 1550 nm (2.4 dB directly measured). The resonator is locked on resonance for tens of minutes with 70 mW of SH light incident on the cavity, demonstrating that photorefraction can be mitigated. Squeezed light production concurrent with cavity length stabilisation utilising the integrated EOM is demonstrated. The device demonstrates the suitability of this platform for squeezed light generation in network applications, where stabilisation to the reference field is typically necessary.

Optics Express•Aug 24, 2023•5 citations

Squeezing in a LiNbO3 integrated optical waveguide circuit

Gregory S. Kanter, Prem Kumar, Rostislav V. Roussev +3 more

We report on traveling-wave quadrature squeezing generated in an integrated optical circuit fabricated with periodicallypoled lithium niobate waveguides. The device integrates a secondharmonic-generation stage, waveguide couplers, spatial mode filters, and a degenerate-optical-parametric-amplification stage. The integrationpromises to create a low power, compact, and simple source of wideband squeezed light. -1 dB of squeezing is directly measured using 20 ps pulses with peak powers near 6W.

Optics Express•Feb 11, 2002•53 citations

Fully guided and phase locked Ti:PPLN waveguide squeezing for applications in quantum sensing

Renato R. Domeneguetti, Michael Stefszky, Harald Herrmann +4 more

This work reports a fully guided setup for single-mode squeezing on integrated titanium-indiffused periodically poled nonlinear resonators. A continuous-wave laser beam is delivered and the squeezed field is collected by single-mode fibers; up to -3.17(9) dB of useful squeezing is available in fibers. To showcase the usefulness of such a fiber-coupled device, we applied the generated squeezed light in a fiber-based phase sensing experiment, showing a quantum enhancement in the signal-to-noise ratio of 0.35 dB. Moreover, our investigation of the effect of photorefraction on the cavity resonance condition suggests that it causes system instabilities at high powers.

arXiv:2306.04767•Optics Letters•Apr 3, 2023•13 citations

Waveguide resonators as squeezed light sources

Michael Stefszky, Matteo Santandrea, Felix vom Bruch +5 more

Squeezed light forms the foundation of continuous-variable quantum optics. In most experimental realisations, bulk optics resonators utilising the second-order nonlinearity serve as the source of stable, high levels of squeezing. As one would expect, there is a drive towards producing squeezed light sources in integrated platforms, as it is expected that such a transition will ease the challenges in moving toward real-world applications. However, waveguides come with their own set of challenges; they generally exhibit increased losses, and some platforms suffer from photothermal or photorefractive effects.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 21, 2021•0 citations

Self-contained integrated bistable optical devices

P. W. E. Smith, I. P. Kaminow, P. J. Maloney +1 more

We have built self-contained bistable optical devices using integrated Fabry-Perot resonators formed by attaching dielectric mirrors to the cleaved ends of a LiNbO3 substrate containing a Ti in-diffused waveguide modulator. Feedback from a novel composite photovoltaic detector which samples the output beam is applied to the modulator electrodes. We also describe an off-axis extraordinary wave resonator which permits low-energy operation. These integrated bistable devices operate solely with optical inputs and outputs; no source of electrical energy is required.

Applied Physics Letters•Jan 1, 1979•55 citations
``Squeezed'' states of light are the fundamental building blocks for continuous-variable quantum optics, so a quantum network for optical communication would seem to require a compact, efficient source of such states. Combining clever design with recent advances in waveguide materials engineering, the authors produce a device that yields very high levels of squeezing, compared to other integrated architectures. Their innovative approach allows for rarely seen continuous-wave squeezing, paving the way for more advanced on-chip functions.
We report a titanium indiffused waveguide resonator featuring an integrated electro-optic modulator for cavity length stabilisation that produces close to 5 dB of squeezed light at 1550 nm (2.4 dB directly measured). The resonator is locked on resonance for tens of minutes with 70 mW of SH light incident on the cavity, demonstrating that photorefraction can be mitigated. Squeezed light production concurrent with cavity length stabilisation utilising the integrated EOM is demonstrated. The device demonstrates the suitability of this platform for squeezed light generation in network applications, where stabilisation to the reference field is typically necessary.
This work reports a fully guided setup for single-mode squeezing on integrated titanium-indiffused periodically poled nonlinear resonators. A continuous-wave laser beam is delivered and the squeezed field is collected by single-mode fibers; up to -3.17(9) dB of useful squeezing is available in fibers. To showcase the usefulness of such a fiber-coupled device, we applied the generated squeezed light in a fiber-based phase sensing experiment, showing a quantum enhancement in the signal-to-noise ratio of 0.35 dB. Moreover, our investigation of the effect of photorefraction on the cavity resonance condition suggests that it causes system instabilities at high powers.
Squeezed light forms the foundation of continuous-variable quantum optics. In most experimental realisations, bulk optics resonators utilising the second-order nonlinearity serve as the source of stable, high levels of squeezing. As one would expect, there is a drive towards producing squeezed light sources in integrated platforms, as it is expected that such a transition will ease the challenges in moving toward real-world applications. However, waveguides come with their own set of challenges; they generally exhibit increased losses, and some platforms suffer from photothermal or photorefractive effects.
We have built self-contained bistable optical devices using integrated Fabry-Perot resonators formed by attaching dielectric mirrors to the cleaved ends of a LiNbO3 substrate containing a Ti in-diffused waveguide modulator. Feedback from a novel composite photovoltaic detector which samples the output beam is applied to the modulator electrodes. We also describe an off-axis extraordinary wave resonator which permits low-energy operation. These integrated bistable devices operate solely with optical inputs and outputs; no source of electrical energy is required.