Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Self-contained integrated bistable optical devices

P. W. E. Smith, I. P. Kaminow, P. J. Maloney, L.W. Stulz

Published Jan 1, 1979• 54 citations
Publisher

Abstract

We have built self-contained bistable optical devices using integrated Fabry-Perot resonators formed by attaching dielectric mirrors to the cleaved ends of a LiNbO3 substrate containing a Ti in-diffused waveguide modulator. Feedback from a novel composite photovoltaic detector which samples the output beam is applied to the modulator electrodes. We also describe an off-axis extraordinary wave resonator which permits low-energy operation. These integrated bistable devices operate solely with optical inputs and outputs; no source of electrical energy is required.

DOI
10.1063/1.90559

Related papers

A Novel Integrated Optical Bistable Device

Junji Yumoto, H. Yajima, Satoshi Ishihara +2 more

The characteristics of novel optical bistable devices which integrate both interdigital electrodes and amorphous silicon photovoltaic detectors on the Ti-diffused LiNbO3 waveguide are described. In the devices, the transmitted light of the interdigital electrodes enters the amorphous silicon photovoltaic detectors and the output voltage of the detectors is fedback to the electrodes. Optical bistable operation occurs due to the nonlinear dependence of the transmission efficiency of the electrodes on the applied voltage. The characteristics of differential gain and hysteresis of the device were observed experimentally.

International Conference on Solid State Devices and Materials (SSDM)•Aug 25, 1982•1 citation

Optical bistable device as electro-optical multivibrator

W. Sohler

A truly bistable device using an integrated optical cutoff modulator in LiNbO3 is reported. With appropriate optical input power, the device may be used as an electrical Schmitt trigger (electrical bistability). By electrical feedback, electro-optical multivibrator operation is demonstrated.

Applied Physics Letters•Mar 1, 1980•26 citations

Optical bistability based on self-focusing

John E. Bjorkholm, P. W. E. Smith, W. J. Tomlinson +3 more

We have experimentally demonstrated a fundamentally new type of intrinsic optical bistability. The operation of this new class of device is based on self-focusing of a laser beam as it propagates through a nonlinear medium. It further differs from previous optical devices which exhibited intrinsic bistability (only optical feedback, no electrical feedback) in that the earlier devices have all required resonant optical cavities; no such cavity is required for this new type of device.

Conference on Lasers and Electro-Optics•Jan 1, 1981•1 citation

Low-power optical bistability and multistability in a self-electro-optic silicon interferometer

D. Jäger, Franz Forsmann, B. Wedding

A novel hybrid semiconductor device is presented which shows optical bistability and a clear optical multistability at milliwatt input powers. Experimentally, a silicon etalon is used as a Fabry-Perot interferometer where an electric field is additionally applied by using integrated electrical contacts. At 1.06 μm the device exhibits the combined properties of a photodetector and an optical modulator. Due to this self-electro-optic effect a large optical nonlinearity is achieved which is theoretically attributed to electrical and optical heating of the sample.

IEEE Journal of Quantum Electronics•Sep 1, 1985•29 citations

Optical Bistability in a Silicon Waveguide Distributed Bragg Reflector Fabry–Pérot Resonator

Andrew Grieco, Boris A. Slutsky, Dawn T. H. Tan +3 more

We demonstrate optical bistability in a silicon waveguide Fabry-Pérot resonator formed by a pair of distributed Bragg reflectors. In the bistable regime, the output power of the resonator ceases to be uniquely determined by the input power because multiple powers within the cavity satisfy the resonance condition. Pulsating behavior is observed within the resonator output, and is attributed to noise within the experimental setup driving the resonator between the multiple allowed output powers.

Journal of Lightwave Technology•May 24, 2012•41 citations

Optical bistability based on self-focusing

John E. Bjorkholm, P. W. E. Smith, W. Tomlinson +3 more

We experimentally demonstrate a fundamentally new type of intrinsic optical bistability that requires no resonant optical cavity. Operation is based on mutual self-focusing of counterpropagating laser beams in a nonlinear medium. We propose and experimentally demonstrate a fundamentally new type of optical bistability. 1 The operation of this new class of devices is based on self-focusing of light; the feedback required for bistability is provided by an apertured retroreflector. These devices exhibit intrinsic bistability (the feedback is optical) and are related to nonlinear waveguide devices proposed earlier. 2 Self-focusing occurs when a light beam having a nonuniform spatial profile (such as a Gaussian laser beam) and sufficient intensity propagates through a nonlinear medium having an intensity-dependent index of refraction. 3 Previously proposed devices that exhibited

IEEE Journal of Quantum Electronics•Dec 1, 1981•0 citations
We have built self-contained bistable optical devices using integrated Fabry-Perot resonators formed by attaching dielectric mirrors to the cleaved ends of a LiNbO3 substrate containing a Ti in-diffused waveguide modulator. Feedback from a novel composite photovoltaic detector which samples the output beam is applied to the modulator electrodes. We also describe an off-axis extraordinary wave resonator which permits low-energy operation. These integrated bistable devices operate solely with optical inputs and outputs; no source of electrical energy is required.
The characteristics of novel optical bistable devices which integrate both interdigital electrodes and amorphous silicon photovoltaic detectors on the Ti-diffused LiNbO3 waveguide are described. In the devices, the transmitted light of the interdigital electrodes enters the amorphous silicon photovoltaic detectors and the output voltage of the detectors is fedback to the electrodes. Optical bistable operation occurs due to the nonlinear dependence of the transmission efficiency of the electrodes on the applied voltage. The characteristics of differential gain and hysteresis of the device were observed experimentally.
A novel hybrid semiconductor device is presented which shows optical bistability and a clear optical multistability at milliwatt input powers. Experimentally, a silicon etalon is used as a Fabry-Perot interferometer where an electric field is additionally applied by using integrated electrical contacts. At 1.06 μm the device exhibits the combined properties of a photodetector and an optical modulator. Due to this self-electro-optic effect a large optical nonlinearity is achieved which is theoretically attributed to electrical and optical heating of the sample.
We experimentally demonstrate a fundamentally new type of intrinsic optical bistability that requires no resonant optical cavity. Operation is based on mutual self-focusing of counterpropagating laser beams in a nonlinear medium. We propose and experimentally demonstrate a fundamentally new type of optical bistability. 1 The operation of this new class of devices is based on self-focusing of light; the feedback required for bistability is provided by an apertured retroreflector. These devices exhibit intrinsic bistability (the feedback is optical) and are related to nonlinear waveguide devices proposed earlier. 2 Self-focusing occurs when a light beam having a nonuniform spatial profile (such as a Gaussian laser beam) and sufficient intensity propagates through a nonlinear medium having an intensity-dependent index of refraction. 3 Previously proposed devices that exhibited