Shortcuts to adiabaticity is a general method for speeding up adiabatic quantum protocols, and has many potential applications in quantum information processing. Unfortunately, analytically constructing shortcuts to adiabaticity for systems having complex interactions and more than a few levels is a challenging task. This is usually overcome by assuming an idealized Hamiltonian [e.g., only a limited subset of energy levels are retained, and the rotating-wave approximation (RWA) is made]. Here we develop an analytic approach that allows one to go beyond these limitations. Our method is general and results in analytically derived pulse shapes that correct both nonadiabatic errors and non-RWA errors. We also show that our approach can yield pulses requiring a smaller driving power than conventional nonadiabatic protocols. We show in detail how our ideas can be used to analytically design high-fidelity single-qubit "tripod"gates in a realistic superconducting fluxonium qubit.
Shortcuts to adiabaticity is a general method for speeding up adiabatic quantum protocols, and has many potential applications in quantum information processing. Unfortunately, analytically constructing shortcuts to adiabaticity for systems having complex interactions and more than a few levels is a challenging task. This is usually overcome by assuming an idealized Hamiltonian [e.g., only a limited subset of energy levels are retained, and the rotating-wave approximation (RWA) is made]. Here we develop an analytic approach that allows one to go beyond these limitations. Our method is general and results in analytically derived pulse shapes that correct both nonadiabatic errors and non-RWA errors. We also show that our approach can yield pulses requiring a smaller driving power than conventional nonadiabatic protocols. We show in detail how our ideas can be used to analytically design high-fidelity single-qubit "tripod"gates in a realistic superconducting fluxonium qubit.
Shortcuts to adiabaticity is a general method for speeding up adiabatic quantum protocols, and has many potential applications in quantum information processing.Unfortunately, analytically constructing shortcuts to adiabaticity for systems having complex interactions and more than a few levels is a challenging task.This is usually overcome by assuming an idealized Hamiltonian [e.g., only a limited subset of energy levels are retained, and the rotating-wave approximation (RWA) is made].Here we develop an analytic approach that allows one to go beyond these limitations.Our method is general and results in analytically derived pulse shapes that correct both nonadiabatic errors and non-RWA errors.We also show that our approach can yield pulses requiring a smaller driving power than conventional nonadiabatic protocols.We show in detail how our ideas can be used to analytically design high-fidelity single-qubit "tripod" gates in a realistic superconducting fluxonium qubit.
Shortcuts to adiabaticity (STA) is a general methodology for speeding up adiabatic quantumprotocols, and has many potential applications in quantum information processing. Unfortunately,analytically constructing STAs for systems having complex interactions and more than a few levelsis a challenging task. This is usually overcome by assuming an idealized Hamiltonian (e.g., only alimited subset of energy levels are retained, and the rotating-wave approximation (RWA) is made).Here, we develop ananalyticapproach that allows one to go beyond these limitations. Our methodis general and results in analytically-derived pulse shapes that correct both non-adiabatic errorsas well as non-RWA errors. We also show that our approach can yield pulses requiring a smallerdriving power than conventional non-adiabatic protocols. We show in detail how our ideas can beused to analytically design high-fidelity single-qubit “tripod” gates in a realistic superconductingfluxonium qubit.
In many quantum platforms, single-qubit gates are applied using a linear drive resonant with the qubit transition frequency, which is often theoretically described within the rotating-wave approximation (RWA). However, for fast gates on low-frequency qubits, the RWA may not hold and we need to consider the contribution from counterrotating terms to the qubit dynamics. The inclusion of counterrotating terms into the theoretical description gives rise to two challenges. First, it becomes challenging to analytically calculate the time evolution as the Hamiltonian is no longer self-commuting. Moreover, the time evolution now depends on the carrier phase such that, in general, every operation in a sequence of gates is different. In this work, we derive and verify a correction to the drive pulses that minimizes the effect of these counterrotating terms in a two-level system. We then derive a second correction term that arises from noncomputational levels for a strongly anharmonic system. We experimentally implement these correction terms on a fluxonium superconducting qubit, which is an example of a strongly anharmonic, low-frequency qubit for which the RWA may not hold, and demonstrate how fast, high-fidelity single-qubit gates can be achieved without the need for additional hardware and calibration complexities.
We develop protocols for high-fidelity single-qubit gates that exploit and extend theoretical ideas for accelerated adiabatic evolution. Our protocols are compatible with qubit architectures where direct transitions between logical states are either vanishingly small or nonexistent; in such systems traditional approaches cannot be implemented. Prime examples are superconducting fluxonium qubits, which have highly localized states, and AMO systems, where there are no dipole allowed transitions between the ground states encoding the logical states. By using an accelerated adiabatic protocol we can enforce the desired adiabatic evolution while having gate times that are comparable to the inverse adiabatic energy gap (a scale that is ultimately set by the amount of power used in the control pulses). By modeling the effects of decoherence, we explore the trade-off between speed and robustness that is inherent to shortcuts-to-adiabaticity approaches.
Logic gates in superconducting quantum processors are implemented through precisely shaped microwave pulses, whose durations are constrained by both device coherence and the multilevel structure of artificial atoms. While single-qubit fidelities above 0.999 are routinely achieved, the physical execution time of these gates remains a major bottleneck for deep quantum circuits. Here we examine single-qubit control across adiabatic [where the rotating-wave approximation (RWA) is valid], intermediate, and diabatic driving regimes using both an ideal two-level model and a realistic weakly anharmonic transmon Hamiltonian. By sweeping pulse durations and drive strengths over experimentally relevant ranges, we compare performance trade-offs and identify the conditions under which ultrashort gates remain viable. Our simulations uncover a quantitative speed-limit mechanism intrinsic to weakly anharmonic superconducting qubits: leakage to higher levels rises sharply once the peak Rabi rate exceeds a fixed fraction of the anharmonicity. Across all pulse shapes and driving regimes studied, we find a consistent numerical threshold at Ω max /|Δ|≈0.15−0.20, where Ω max denotes the peak drive (Rabi) amplitude and Δ is the transmon anharmonicity. Beyond this ratio, gate fidelity deteriorates regardless of waveform engineering. This boundary, obtained from full multilevel time-domain simulations spanning adiabatic, intermediate, and diabatic regimes, constitutes a previously unreported characterization of the fundamental leakage barrier in transmon devices. Our results, therefore, provide the first unified quantitative map linking pulse duration, driving strength, and anharmonicity, establishing why realistic superconducting qubits cannot sustain picosecond-scale gates despite ideal two-level predictions, and offering a practical benchmark for next-generation architectures seeking shorter, high-fidelity control.
Quantum protocols based on adiabatic evolution are remarkably robust against imperfections of control pulses and system uncertainties. While adiabatic protocols have been successfully implemented for quantum operations such as quantum state transfer and single-qubit gates, their use for geometric two-qubit gates remains a challenge. In this paper, we propose a general scheme to realize robust geometric two-qubit gates in multilevel qubit systems where the interaction between the qubits is mediated by an auxiliary system (such as a bus or coupler). While our scheme utilizes stimulated Raman adiabatic passage (STIRAP), it is substantially simpler than STIRAP-based gates that have been proposed for atomic platforms, requiring fewer control tones and ancillary states, as well as utilizing only a generic dispersive interaction. We also show how our gate can be accelerated using a shortcuts-to-adiabaticity approach, allowing one to achieve a gate that is both fast and relatively robust. We present a comprehensive theoretical analysis of the performance of our two-qubit gate in parametrically modulated superconducting circuits comprising two fluxonium qubits coupled to an auxiliary system.