© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

Journal of the Optical Society of America B

Anharmonicity-limited gate-time boundaries in transmon single-qubit quantum gates

Deniz Türkpençe, Selçuk Çakmak

Published Dec 19, 2025• 0 citations

Abstract

Logic gates in superconducting quantum processors are implemented through precisely shaped microwave pulses, whose durations are constrained by both device coherence and the multilevel structure of artificial atoms. While single-qubit fidelities above 0.999 are routinely achieved, the physical execution time of these gates remains a major bottleneck for deep quantum circuits. Here we examine single-qubit control across adiabatic [where the rotating-wave approximation (RWA) is valid], intermediate, and diabatic driving regimes using both an ideal two-level model and a realistic weakly anharmonic transmon Hamiltonian. By sweeping pulse durations and drive strengths over experimentally relevant ranges, we compare performance trade-offs and identify the conditions under which ultrashort gates remain viable. Our simulations uncover a quantitative speed-limit mechanism intrinsic to weakly anharmonic superconducting qubits: leakage to higher levels rises sharply once the peak Rabi rate exceeds a fixed fraction of the anharmonicity. Across all pulse shapes and driving regimes studied, we find a consistent numerical threshold at Ω max /|Δ|≈0.15−0.20, where Ω max denotes the peak drive (Rabi) amplitude and Δ is the transmon anharmonicity. Beyond this ratio, gate fidelity deteriorates regardless of waveform engineering. This boundary, obtained from full multilevel time-domain simulations spanning adiabatic, intermediate, and diabatic regimes, constitutes a previously unreported characterization of the fundamental leakage barrier in transmon devices. Our results, therefore, provide the first unified quantitative map linking pulse duration, driving strength, and anharmonicity, establishing why realistic superconducting qubits cannot sustain picosecond-scale gates despite ideal two-level predictions, and offering a practical benchmark for next-generation architectures seeking shorter, high-fidelity control.

DOI: 10.1364/josab.581099

Related papers

Ultrafast Single-Qubit Gates in the Diabatic Regime

Deniz Türkpençe, Selçuk Çakmak

Logic gates in superconducting quantum processors are implemented through precise quantum control techniques in the microwave regime. The choice of drive frequency and other control parameters directly determines the duration of quantum gate operations. Because current devices remain too noisy to reach fault tolerance, reducing gate durations, and thereby the overall circuit depth, is of critical importance. In this work, we present a model of single qubit gate execution in both the adiabatic regime, where the rotating wave approximation (RWA) is valid, and the diabatic regime, where the RWA no longer applies. Using parameters representative of superconducting qubits, we investigate how gates can be driven at durations well below conventional timescales, and we examine the associated limitations, performance trade offs. The results demonstrate that ultrashort control pulses in the diabatic regime can achieve fidelities comparable to those obtained under standard RWA conditions, offering a possible route to faster quantum logic without sacrificing accuracy under idealized conditions.

arXiv:2509.23467•Sep 27, 2025•0 citations

Ultrafast Single Qubit Gates through Multi-Photon Transition Removal

Y. Gao, A. Galicia, J. D. Da Costa Jesus +12 more

One of the main enablers in quantum computing is having qubit control that is precise and fast. However, qubits typically have multilevel structures making them prone to unwanted transitions from fast gates. This leakage out of the computational subspace is especially detrimental to algorithms as it has been observed to cause long-lived errors, such as in quantum error correction. This forces a choice between either achieving fast gates or having low leakage. Previous works focus on suppressing leakage by mitigating the first to second excited state transition, overlooking multi-photon transitions, and achieving faster gates with further reductions in leakage has remained elusive. Here, we demonstrate single qubit gates with a total leakage error consistently below $2.0\times10^{-5}$, and obtain fidelities above $99.98\%$ for pulse durations down to 6.8 ns for both $X$ and $X/2$ gates. This is achieved by removing direct transitions beyond nearest-neighbor levels using a double recursive implementation of the Derivative Removal by Adiabatic Gate (DRAG) method, which we name the R2D method. Moreover, we find that at such short gate durations and strong driving strengths the main error source is from these higher order transitions. This is all shown in the widely-used superconducting transmon qubit, which has a weakly anharmonic level structure and suffers from higher order transitions significantly. We also introduce an approach for amplifying leakage error that can precisely quantify leakage rates below $10^{-6}$. The presented approach can be readily applied to other qubit types as well.

quant-pharXiv:2511.22365•Nature Communications•Nov 28, 2025•0 citations

Reducing Leakage of Single-Qubit Gates for Superconducting Quantum Processors Using Analytical Control Pulse Envelopes

Eric Hyyppä, Antti P. Vepsäläinen, Miha Papič +10 more

Improving the speed and fidelity of quantum logic gates is essential to reach quantum advantage with future quantum computers. However, fast logic gates lead to increased leakage errors in superconducting quantum processors based on qubits with low anharmonicity, such as transmons. To reduce leakage errors, we propose and experimentally demonstrate two new analytical methods, Fourier ansatz spectrum tuning derivative removal by adiabatic gate (FAST DRAG) and higher-derivative (HD) DRAG, both of which enable shaping single-qubit control pulses in the frequency domain to achieve stronger suppression of leakage transitions compared to previously demonstrated pulse shapes. Using the new methods to suppress the e f transition of a transmon qubit with an anharmonicity of − 212 MHz, we implement R X ( π / 2 ) gates achieving a leakage error below 3.0 × 10 − 5 down to a gate duration of 6.25 ns without the need for iterative closed-loop optimization. The obtained leakage error represents a 20-fold reduction in leakage compared to a conventional cosine DRAG pulse. Employing the FAST DRAG method, we further achieve an error per gate of ( 1.56 ± 0.07 ) × 10 − 4 at a 7.9-ns gate duration, outperforming conventional pulse shapes both in terms of error and gate speed. Furthermore, we study error-amplifying measurements for the characterization of temporal microwave control-pulse distortions, and demonstrate that non-Markovian coherent errors caused by such distortions may be a significant source of error for sub-10-ns single-qubit gates unless corrected using predistortion. Published by the American Physical Society 2024

arXiv:2402.17757•PRX Quantum•Sep 19, 2024•67 citations

Unified scaling of transmon sub-resonant parametric drive strength limits

Jacob Repicky, Girish Kumbhar, Mingkang Xia +6 more

Achieving fast gates and high-fidelity readout in superconducting quantum circuits often benefits from the use of large amplitude microwave drives. As the strength increases, unwanted effects such as excitation out of the logical states also become more prevalent. In transmon qubits, coherent controls relying on sub-resonant drives are fundamentally limited by the eventual appearance of strong hybridization in the spectrum. Understanding how this threshold depends on intrinsic device parameters is vital for the design and operation of circuits utilizing the transmon as a source of nonlinearity. In this work, we present an experimental study of 14 transmons with a wide range of anharmonicities, and use comparison with Floquet branch analysis and semiclassical simulations to establish a straightforward relationship between the critical value of the effective drive amplitude $η_{\max}$ and the ratio $γ=ω_q/α$, where $ω_q$ is the transmon frequency and $-α$ is the anharmonicity. For the case where the transmon is used as a parametrically driven coupler, these results further allow us to estimate maximum parametric interaction rates, which informs the circuit design process for optimizing gate rates and fidelities.

quant-pharXiv:2609.13055•Sep 14, 2026•0 citations

Single-qubit gates in frequency-crowded transmon systems

Ron Schutjens, Fadi Abu Dagga, Daniel J. Egger +1 more

Recent experimental work on superconducting transmon qubits in three-dimensional (3D) cavities shows that their coherence times are increased by an order of magnitude compared to their two-dimensional cavity counterparts. However, to take advantage of these coherence times while scaling up the number of qubits it is advantageous to address individual qubits which are all coupled to the same 3D cavity fields. The challenge in controlling this system comes from spectral crowding, where the leakage transition of qubits is close to computational transitions in other qubits. Here, it is shown that fast pulses are possible which address single qubits using two-quadrature control of the pulse envelope, while the derivative removal by adiabatic gate method of Motzoi et al. [Phys. Rev. Lett. 103, 110501 (2009)] alone only gives marginal improvements over the conventional Gaussian pulse shape. On the other hand, a first-order result using the Magnus expansion gives a fast analytical pulse shape which gives a high-fidelity gate for a specific gate time, up to a phase factor on the second qubit. Further numerical analysis corroborates these results and yields to even faster gates, showing that leakage-state anharmonicity does not provide a fundamental quantum speed limit.

arXiv:1306.2279•Physical Review A•Nov 25, 2013•85 citations

Characterization of leakage errors in a transmon qubit due to resonant digital control

M. A. Castellanos-Beltran, A. J. Sirois, D. I. Olaya +3 more

We present experimental measurements and analysis of leakage errors occurring during resonant digital control of a superconducting qubit. By increasing the amplitude of the digital pulse trains and therefore decreasing the duration of the control gates, from 100 to 40 ns for a π-gate, the leakage error rate measured per Clifford gate in a randomized benchmarking test increases from 4.3×10−4 to 2.4×10−3 and becomes the dominant source of single-qubit gate errors for our qubit; these error rates are 1–2 orders of magnitude larger than we measure when controlling the same qubit using traditional, shaped-analog signals. Simulations show the dominant leakage mechanism arises from the increased spectral power of the pulse trains at the frequency ω12 corresponding to excitations from the first excited state |1⟩ to the second excited state |2⟩. Our measurements demonstrate the fundamental limits to resonant digital control of low-anharmonicity qubits and outline the trade-off between reducing gate times while preserving gate fidelity. We discuss possible strategies for mitigating this issue in future digital control implementations.

Applied Physics Letters•Dec 8, 2025•1 citation

Logic gates in superconducting quantum processors are implemented through precisely shaped microwave pulses, whose durations are constrained by both device coherence and the multilevel structure of artificial atoms. While single-qubit fidelities above 0.999 are routinely achieved, the physical execution time of these gates remains a major bottleneck for deep quantum circuits. Here we examine single-qubit control across adiabatic [where the rotating-wave approximation (RWA) is valid], intermediate, and diabatic driving regimes using both an ideal two-level model and a realistic weakly anharmonic transmon Hamiltonian. By sweeping pulse durations and drive strengths over experimentally relevant ranges, we compare performance trade-offs and identify the conditions under which ultrashort gates remain viable. Our simulations uncover a quantitative speed-limit mechanism intrinsic to weakly anharmonic superconducting qubits: leakage to higher levels rises sharply once the peak Rabi rate exceeds a fixed fraction of the anharmonicity. Across all pulse shapes and driving regimes studied, we find a consistent numerical threshold at Ω max /|Δ|≈0.15−0.20, where Ω max denotes the peak drive (Rabi) amplitude and Δ is the transmon anharmonicity. Beyond this ratio, gate fidelity deteriorates regardless of waveform engineering. This boundary, obtained from full multilevel time-domain simulations spanning adiabatic, intermediate, and diabatic regimes, constitutes a previously unreported characterization of the fundamental leakage barrier in transmon devices. Our results, therefore, provide the first unified quantitative map linking pulse duration, driving strength, and anharmonicity, establishing why realistic superconducting qubits cannot sustain picosecond-scale gates despite ideal two-level predictions, and offering a practical benchmark for next-generation architectures seeking shorter, high-fidelity control.

Logic gates in superconducting quantum processors are implemented through precise quantum control techniques in the microwave regime. The choice of drive frequency and other control parameters directly determines the duration of quantum gate operations. Because current devices remain too noisy to reach fault tolerance, reducing gate durations, and thereby the overall circuit depth, is of critical importance. In this work, we present a model of single qubit gate execution in both the adiabatic regime, where the rotating wave approximation (RWA) is valid, and the diabatic regime, where the RWA no longer applies. Using parameters representative of superconducting qubits, we investigate how gates can be driven at durations well below conventional timescales, and we examine the associated limitations, performance trade offs. The results demonstrate that ultrashort control pulses in the diabatic regime can achieve fidelities comparable to those obtained under standard RWA conditions, offering a possible route to faster quantum logic without sacrificing accuracy under idealized conditions.

One of the main enablers in quantum computing is having qubit control that is precise and fast. However, qubits typically have multilevel structures making them prone to unwanted transitions from fast gates. This leakage out of the computational subspace is especially detrimental to algorithms as it has been observed to cause long-lived errors, such as in quantum error correction. This forces a choice between either achieving fast gates or having low leakage. Previous works focus on suppressing leakage by mitigating the first to second excited state transition, overlooking multi-photon transitions, and achieving faster gates with further reductions in leakage has remained elusive. Here, we demonstrate single qubit gates with a total leakage error consistently below

2.0\times10^{-5}

, and obtain fidelities above

99.98\%

for pulse durations down to 6.8 ns for both

X

and

X/2

gates. This is achieved by removing direct transitions beyond nearest-neighbor levels using a double recursive implementation of the Derivative Removal by Adiabatic Gate (DRAG) method, which we name the R2D method. Moreover, we find that at such short gate durations and strong driving strengths the main error source is from these higher order transitions. This is all shown in the widely-used superconducting transmon qubit, which has a weakly anharmonic level structure and suffers from higher order transitions significantly. We also introduce an approach for amplifying leakage error that can precisely quantify leakage rates below

10^{-6}

. The presented approach can be readily applied to other qubit types as well.

Improving the speed and fidelity of quantum logic gates is essential to reach quantum advantage with future quantum computers. However, fast logic gates lead to increased leakage errors in superconducting quantum processors based on qubits with low anharmonicity, such as transmons. To reduce leakage errors, we propose and experimentally demonstrate two new analytical methods, Fourier ansatz spectrum tuning derivative removal by adiabatic gate (FAST DRAG) and higher-derivative (HD) DRAG, both of which enable shaping single-qubit control pulses in the frequency domain to achieve stronger suppression of leakage transitions compared to previously demonstrated pulse shapes. Using the new methods to suppress the e f transition of a transmon qubit with an anharmonicity of − 212 MHz, we implement R X ( π / 2 ) gates achieving a leakage error below 3.0 × 10 − 5 down to a gate duration of 6.25 ns without the need for iterative closed-loop optimization. The obtained leakage error represents a 20-fold reduction in leakage compared to a conventional cosine DRAG pulse. Employing the FAST DRAG method, we further achieve an error per gate of ( 1.56 ± 0.07 ) × 10 − 4 at a 7.9-ns gate duration, outperforming conventional pulse shapes both in terms of error and gate speed. Furthermore, we study error-amplifying measurements for the characterization of temporal microwave control-pulse distortions, and demonstrate that non-Markovian coherent errors caused by such distortions may be a significant source of error for sub-10-ns single-qubit gates unless corrected using predistortion. Published by the American Physical Society 2024

Achieving fast gates and high-fidelity readout in superconducting quantum circuits often benefits from the use of large amplitude microwave drives. As the strength increases, unwanted effects such as excitation out of the logical states also become more prevalent. In transmon qubits, coherent controls relying on sub-resonant drives are fundamentally limited by the eventual appearance of strong hybridization in the spectrum. Understanding how this threshold depends on intrinsic device parameters is vital for the design and operation of circuits utilizing the transmon as a source of nonlinearity. In this work, we present an experimental study of 14 transmons with a wide range of anharmonicities, and use comparison with Floquet branch analysis and semiclassical simulations to establish a straightforward relationship between the critical value of the effective drive amplitude

η_{\max}

and the ratio

γ=ω_q/α

, where

ω_q

is the transmon frequency and

-α

is the anharmonicity. For the case where the transmon is used as a parametrically driven coupler, these results further allow us to estimate maximum parametric interaction rates, which informs the circuit design process for optimizing gate rates and fidelities.

Recent experimental work on superconducting transmon qubits in three-dimensional (3D) cavities shows that their coherence times are increased by an order of magnitude compared to their two-dimensional cavity counterparts. However, to take advantage of these coherence times while scaling up the number of qubits it is advantageous to address individual qubits which are all coupled to the same 3D cavity fields. The challenge in controlling this system comes from spectral crowding, where the leakage transition of qubits is close to computational transitions in other qubits. Here, it is shown that fast pulses are possible which address single qubits using two-quadrature control of the pulse envelope, while the derivative removal by adiabatic gate method of Motzoi et al. [Phys. Rev. Lett. 103, 110501 (2009)] alone only gives marginal improvements over the conventional Gaussian pulse shape. On the other hand, a first-order result using the Magnus expansion gives a fast analytical pulse shape which gives a high-fidelity gate for a specific gate time, up to a phase factor on the second qubit. Further numerical analysis corroborates these results and yields to even faster gates, showing that leakage-state anharmonicity does not provide a fundamental quantum speed limit.

We present experimental measurements and analysis of leakage errors occurring during resonant digital control of a superconducting qubit. By increasing the amplitude of the digital pulse trains and therefore decreasing the duration of the control gates, from 100 to 40 ns for a π-gate, the leakage error rate measured per Clifford gate in a randomized benchmarking test increases from 4.3×10−4 to 2.4×10−3 and becomes the dominant source of single-qubit gate errors for our qubit; these error rates are 1–2 orders of magnitude larger than we measure when controlling the same qubit using traditional, shaped-analog signals. Simulations show the dominant leakage mechanism arises from the increased spectral power of the pulse trains at the frequency ω12 corresponding to excitations from the first excited state |1⟩ to the second excited state |2⟩. Our measurements demonstrate the fundamental limits to resonant digital control of low-anharmonicity qubits and outline the trade-off between reducing gate times while preserving gate fidelity. We discuss possible strategies for mitigating this issue in future digital control implementations.