Recent experimental work on superconducting transmon qubits in three-dimensional (3D) cavities shows that their coherence times are increased by an order of magnitude compared to their two-dimensional cavity counterparts. However, to take advantage of these coherence times while scaling up the number of qubits it is advantageous to address individual qubits which are all coupled to the same 3D cavity fields. The challenge in controlling this system comes from spectral crowding, where the leakage transition of qubits is close to computational transitions in other qubits. Here, it is shown that fast pulses are possible which address single qubits using two-quadrature control of the pulse envelope, while the derivative removal by adiabatic gate method of Motzoi et al. [Phys. Rev. Lett. 103, 110501 (2009)] alone only gives marginal improvements over the conventional Gaussian pulse shape. On the other hand, a first-order result using the Magnus expansion gives a fast analytical pulse shape which gives a high-fidelity gate for a specific gate time, up to a phase factor on the second qubit. Further numerical analysis corroborates these results and yields to even faster gates, showing that leakage-state anharmonicity does not provide a fundamental quantum speed limit.
Recent experimental work on superconducting transmon qubits in three-dimensional (3D) cavities shows that their coherence times are increased by an order of magnitude compared to their two-dimensional cavity counterparts. However, to take advantage of these coherence times while scaling up the number of qubits it is advantageous to address individual qubits which are all coupled to the same 3D cavity fields. The challenge in controlling this system comes from spectral crowding, where the leakage transition of qubits is close to computational transitions in other qubits. Here, it is shown that fast pulses are possible which address single qubits using two-quadrature control of the pulse envelope, while the derivative removal by adiabatic gate method of Motzoi et al. [Phys. Rev. Lett. 103, 110501 (2009)] alone only gives marginal improvements over the conventional Gaussian pulse shape. On the other hand, a first-order result using the Magnus expansion gives a fast analytical pulse shape which gives a high-fidelity gate for a specific gate time, up to a phase factor on the second qubit. Further numerical analysis corroborates these results and yields to even faster gates, showing that leakage-state anharmonicity does not provide a fundamental quantum speed limit.
Superconducting transmon qubits comprise one of the most promising platforms for quantum information processing due to their long coherence times and to their scalability into larger qubit networks. However, their weakly anharmonic spectrum leads to spectral crowding in multiqubit systems, making it challenging to implement fast, high-fidelity gates while avoiding leakage errors. To address this challenge, we use a protocol for speeding up waveforms by inducing phases to harmful transitions (SWIPHT) [S. E. Economou and E. Barnes, Phys. Rev. B 91, 161405(R) (2015)], which yields smooth, simple microwave pulses designed to suppress leakage without sacrificing gate speed through spectral selectivity. Here, we determine the parameter regimes in which SWIPHT is effective and demonstrate that in these regimes, it systematically produces two-qubit gate fidelities for cavity-coupled transmons in the range 99.6%--99.9% with gate times as fast as 23 ns. Our results are obtained from full numerical simulations that include current experimental levels of relaxation and dephasing. These high fidelities persist over a wide range of system parameters that encompass many current experimental setups and are insensitive to small parameter variations and pulse imperfections.
Improving the speed and fidelity of quantum logic gates is essential to reach quantum advantage with future quantum computers. However, fast logic gates lead to increased leakage errors in superconducting quantum processors based on qubits with low anharmonicity, such as transmons. To reduce leakage errors, we propose and experimentally demonstrate two new analytical methods, Fourier ansatz spectrum tuning derivative removal by adiabatic gate (FAST DRAG) and higher-derivative (HD) DRAG, both of which enable shaping single-qubit control pulses in the frequency domain to achieve stronger suppression of leakage transitions compared to previously demonstrated pulse shapes. Using the new methods to suppress the e f transition of a transmon qubit with an anharmonicity of − 212 MHz, we implement R X ( π / 2 ) gates achieving a leakage error below 3.0 × 10 − 5 down to a gate duration of 6.25 ns without the need for iterative closed-loop optimization. The obtained leakage error represents a 20-fold reduction in leakage compared to a conventional cosine DRAG pulse. Employing the FAST DRAG method, we further achieve an error per gate of ( 1.56 ± 0.07 ) × 10 − 4 at a 7.9-ns gate duration, outperforming conventional pulse shapes both in terms of error and gate speed. Furthermore, we study error-amplifying measurements for the characterization of temporal microwave control-pulse distortions, and demonstrate that non-Markovian coherent errors caused by such distortions may be a significant source of error for sub-10-ns single-qubit gates unless corrected using predistortion. Published by the American Physical Society 2024
One of the main enablers in quantum computing is having qubit control that is precise and fast. However, qubits typically have multilevel structures making them prone to unwanted transitions from fast gates. This leakage out of the computational subspace is especially detrimental to algorithms as it has been observed to cause long-lived errors, such as in quantum error correction. This forces a choice between either achieving fast gates or having low leakage. Previous works focus on suppressing leakage by mitigating the first to second excited state transition, overlooking multi-photon transitions, and achieving faster gates with further reductions in leakage has remained elusive. Here, we demonstrate single qubit gates with a total leakage error consistently below 2.0×10−5, and obtain fidelities above 99.98% for pulse durations down to 6.8 ns for both X and X/2 gates. This is achieved by removing direct transitions beyond nearest-neighbor levels using a double recursive implementation of the Derivative Removal by Adiabatic Gate (DRAG) method, which we name the R2D method. Moreover, we find that at such short gate durations and strong driving strengths the main error source is from these higher order transitions. This is all shown in the widely-used superconducting transmon qubit, which has a weakly anharmonic level structure and suffers from higher order transitions significantly. We also introduce an approach for amplifying leakage error that can precisely quantify leakage rates below 10−6. The presented approach can be readily applied to other qubit types as well.
This dissertation describes research to coherently control quantum states of superconducting devices. In the first project, the state of an 8 GHz 3D superconducting Al cavity at 20mK was manipulated to add a quantum of excitation. Preparing a harmonic resonator in a state with a well-defined number of excitations (Fock states) is not possible using one external classical drive. I generated Fock states by transferring a single excitation from a 5.5 GHz transmon qubit to a cavity using Stimulated Raman Adiabatic Passage (STIRAP). I also extended the STIRAP technique to put the cavity in higher Fock states, superpositions of Fock states, and Bell states between the qubit and the cavity. Master-equation simulations of the system’s density matrix were in good agreement with the data, and I obtained estimated fidelities of 89%, 68% and 43% for the first three Fock states, respectively. The second project involved implementing an entangling gate between two Al/AlOx/Al transmon qubits that were mounted in an Al cavity and cooled to 20mK. Pertinent system frequencies were as follows: one qubit was at 6.0 GHz, the other qubit at 6.8 GHz, the cavity at 7.7 GHz, and the qubit-qubit dispersive shift was -1MHz. By applying a specially-shaped pulse of duration tg = 907ns, I implemented a generalized CNOT gate using an all-microwave technique known as Speeding up Waveforms by Inducing Phases to Harmful Transitions (SWIPHT). Using quantum process tomography, I found that the gate fidelity was 80%–82%, close to the 87% fidelity expected from decoherence in the transmons during the gate time. Details of the device fabrication, device characterization, measurement techniques, and extensive modeling of device behavior are presented, along with chi-matrix characterization of single-qubit gates and SWIPHT gates.
Logic gates in superconducting quantum processors are implemented through precisely shaped microwave pulses, whose durations are constrained by both device coherence and the multilevel structure of artificial atoms. While single-qubit fidelities above 0.999 are routinely achieved, the physical execution time of these gates remains a major bottleneck for deep quantum circuits. Here we examine single-qubit control across adiabatic [where the rotating-wave approximation (RWA) is valid], intermediate, and diabatic driving regimes using both an ideal two-level model and a realistic weakly anharmonic transmon Hamiltonian. By sweeping pulse durations and drive strengths over experimentally relevant ranges, we compare performance trade-offs and identify the conditions under which ultrashort gates remain viable. Our simulations uncover a quantitative speed-limit mechanism intrinsic to weakly anharmonic superconducting qubits: leakage to higher levels rises sharply once the peak Rabi rate exceeds a fixed fraction of the anharmonicity. Across all pulse shapes and driving regimes studied, we find a consistent numerical threshold at Ω max /|Δ|≈0.15−0.20, where Ω max denotes the peak drive (Rabi) amplitude and Δ is the transmon anharmonicity. Beyond this ratio, gate fidelity deteriorates regardless of waveform engineering. This boundary, obtained from full multilevel time-domain simulations spanning adiabatic, intermediate, and diabatic regimes, constitutes a previously unreported characterization of the fundamental leakage barrier in transmon devices. Our results, therefore, provide the first unified quantitative map linking pulse duration, driving strength, and anharmonicity, establishing why realistic superconducting qubits cannot sustain picosecond-scale gates despite ideal two-level predictions, and offering a practical benchmark for next-generation architectures seeking shorter, high-fidelity control.
Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.