The measurement accuracy of laser precision measurement is mainly limited by optical field noise and various technical noises. After the de-coupling technical noises, quantum noise becomes the main factor limiting the measurement accuracy. Based on the intensity noise characteristics of solid-state single-frequency lasers, the main sources of intensity noise and their influence on the power noise spectrum were described, and three kinds of intensity noise suppression techniques, including traditional DC feedback control, optical AC coupled feedback control and quantum squeezer, were reviewed in this paper. By reviewing the development history of relevant technologies, the current development level and future development trend of intensity noise suppression technology were summarized-the noise suppression scheme combining three technologies is an important approach to solve high sensitivity detection.
The measurement accuracy of laser precision measurement is mainly limited by optical field noise and various technical noises. After the de-coupling technical noises, quantum noise becomes the main factor limiting the measurement accuracy. Based on the intensity noise characteristics of solid-state single-frequency lasers, the main sources of intensity noise and their influence on the power noise spectrum were described, and three kinds of intensity noise suppression techniques, including traditional DC feedback control, optical AC coupled feedback control and quantum squeezer, were reviewed in this paper. By reviewing the development history of relevant technologies, the current development level and future development trend of intensity noise suppression technology were summarized-the noise suppression scheme combining three technologies is an important approach to solve high sensitivity detection.
This research focuses on advanced noise suppression technologies for high-precision measurement systems, particularly addressing the limitations of classical noise reducing approaches. The noise level of laser sources is a crucial factor that directly affects the measurement sensitivity in applications such as gravitational wave detection and biomedical imaging. Classical feedback control technologies are effective but often encounter a bottleneck resulting from the classical noise suppression limits. To cope with these challenges, a novel method integrating quantum squeezed light with classical feedback control systems to reduce intensity noise is proposed in this work. By employing an amplitude-squeezed light field, a quantum-enhanced feedback control model is developed, thereby theoretically examining the influence of both the feedback loop gain and the degree of squeezing on the noise suppression performance. The results show that the injection of squeezed light significantly reduces the intensity noise, approaching the shot noise limit (SNL), thereby improving the system sensitivity beyond the classical noise reduction boundaries. Specifically, –10 dB squeezed state injection into the feedback system yields an additional noise suppression of approximately 8.97 dB, exceeding what is achievable using classical feedback alone. This demonstrates that the potential of the proposed method can enhance measurement precision close to the quantum noise limits without increasing the laser power. The analysis highlights the asymmetric noise suppression effects between the inner feedback loop and outer feedback loop. Although the outer loop benefits significantly from the squeezed light injection and achieves noise levels that are unattainable by classical feedback methods, the inner loop shows relatively minor improvements. This asymmetry is attributed to the inherent characteristics of quantum squeezing and the limitations of the feedback loop design. Further investigation into the individual noise components reveals that the primary contributors to the intensity noise include input noise, photodetector noise, and beam splitter-induced vacuum fluctuations. The injection of squeezed light effectively mitigates these vacuum fluctuations, which are typically a major noise source in high-precision laser systems. Theoretical research results show that the use of squeezed light in feedback control systems can effectively enhance noise suppression, equivalent to a nine fold increase in detected optical power, without the physical drawbacks of increasing laser power such as thermal noise. In conclusion, this study provides a theoretical validation of combining quantum squeezed states with classical feedback control to exceed classical noise suppression limits. The integration of a –10 dB squeezed state demonstrates a significant noise reduction, showing that this hybrid approach could revolutionize noise management in precision measurement applications. The results pave the way for further exploring quantum-enhanced control technologies in fields such as gravitational wave detection, quantum communication, and advanced optical sensing, providing a pathway for improving sensitivity and noise suppression without increasing additional power requirements.
Based on the special demands of quantum optical experiments for low noise detectors,a high gain and shot noise detector was designed by combing an AC current coupled trans-impedance pre-amplify circuit and an ETX500photodiode.Compared with existing detectors,the designed detector shows better characteristics in gain,bandwidth and AC DC saturation.The output characteristics of the detector were measured by using a 1 064nm single frequency laser as a source and a frequency spectrum analyzer as the measuring instrument.Measuring results show that the power noise spectrum of the detector is 10dB higher than that of electronic noise spectrum when the injecting power for the detector is more than 850μW at 2MHz.Furthermore,the bandwidth of the shot noise detector reaches 5MH when the input infrared laser power is above 1.62mW.The remarkable linearities for the DC and AC currents are available when the input infrared laser power is increased to 36mW.Considering its higher gain and better DC AC saturation characteristics,the detector is advantageous to quantum optic experiments.
We developed a fiber-laser-pumped Ti:sapphire laser system designed for quantum precision measurement applications. By employing a 35 W single-frequency 532 nm fiber laser as the pump source, the system delivered continuous-wave output powers of 4.12 W at 770.108 nm (D 1 line, K), 4.72 W at 780.244 nm (D 2 line, Rb), and 5.29 W at 794.982 nm (D 1 line, Rb), thereby fulfilling the requirements for optical pumping and probing of alkali atoms. To enhance frequency stability, saturated absorption spectroscopy was used to lock the laser frequency, resulting in frequency drifts below 1 MHz over two hours. Furthermore, since low-frequency intensity noise (DC-100 Hz) critically affects spin-relaxation-free quantum sensing, we carried out a theoretical analysis which identified the pump laser as the dominant noise source. By implementing feedback control to the pump source as well as an external noise suppression, both methods achieved over 30 dB of intensity noise suppression within the DC-4kHz frequency range. In addition, improved beam pointing stability further reduced noise below 3 Hz. These results collectively demonstrate the system’s strong potential for quantum sensing applications.
A fully quantum-mechanical model of feedback to the pump source of a four-level laser is developed with a view to predicting the achievable intensity noise reduction. For solid-state lasers, the model shows that quantum noise sources due to laser dynamics have a significant impact on the optimization of the feedback loop. Experimental results obtained with a diode pumped neodymium:yttrium aluminum garnet (Nd:YAG) laser are found to be in good agreement with the theoretical model. The ultimate limit to the noise suppression comes from the quantum noise due to the measurement processes in the feedback loop. A scheme to overcome this limit using a squeezed vacuum is theoretically demonstrated to be a highly efficient method of generating bright intensity squeezed light, particularly in the kHz regime where bright squeezing is otherwise difficult to obtain.
Squeezed states, which have fewer fluctuations in one quadrature than vacuum noise at the expense of increasing fluctuations in the other quadrature, can be used to enhance measurement accuracy, increase detection sensitivity, and improve fault tolerance performance for quantum information and quantum computation. In this paper, the influences of relative intensity noise (RIN) of all-solid-state single-frequency laser and single-frequency fiber laser on the squeezing factor of squeezed vacuum states are experimentally and theoretically studied. Here, an all-solid-state single-frequency laser and a single-frequency fiber laser each are used as a light source of the system generating squeezed vacuum states. The homodyne detection is used to compare the RIN of all-solid-state single-frequency laser and that of single-frequency fiber laser at the analysis frequency of 1 MHz. The results show that the RIN of the all-solid-state single-frequency laser and single-frequency fiber laser are higher than those of the shot noise limitation 2.3 dB and 30 dB at the analysis frequency of 1 MHz, respectively. The RIN of all-solid-state single-frequency laser is far less than that of the single-frequency fiber laser. As a result, squeezed vacuum state with maximum quantum noise reduction of (13.2 ± 0.2) dB and (10 ± 0.2) dB are directly detected. Theoretical calculation shows that the influence of the RIN on the measurement accuracy is the major factor of degrading the squeezing factor with the fiber laser as the pump source. The measurement error of squeezed vacuum state caused by the RIN of single-frequency fiber laser is about 2.6 dB. The discrepancy of the pump power between the two lasers is another factor of affecting the squeezing factor, corresponding to 0.6 dB quantum noise difference. The theoretical calculations are consistent with the experimental results, which provides some guidance for developing the practical squeezed states with highly squeezing level.
A quantum mechanical model is formulated to describe the coupling between pump intensity noise and laser frequency noise in a solid-state laser. The model allows us to investigate the limiting effects of closed-loop stabilization schemes that utilize this coupling. Two schemes are considered: active control of the quadrature phase noise of the laser and active control of the amplitude noise of the laser. We show that the noise of the laser in the actively stabilized quadrature is ultimately limited by the vacuum noise introduced by the feedback beamsplitter in both schemes. In the case of active control of the quadrature phase noise, the noise is also limited by the intensity noise floor of the detection scheme. We also show that some sources of noise in the passively stabilized quadrature can be suppressed and that it is possible to achieve simultaneous quadrature amplitude and phase stabilization of a solid-state laser. However, the quantum mechanically driven noise in the passively stabilized quadrature cannot be suppressed. While this poses the ultimate limit to the noise in the passively stabilized quadrature, we show that it is experimentally feasible to observe squeezing directly generated by a solid-state laser using this technique.