In the conventional picture of quantum feedback control, sensors make measurements on a quantum system, a classical controller processes the results of the measurements, and semi-classical actuators act back on the system to alter its behavior. Quantum measurements are well known to yield probabilistic results and to introduce unavoidable disturbances in the system measured. Accordingly, quantum feedback is traditionally considered to be both probabilistic and destructive. This paper proposes and provides an experimental demonstration of an alternative method for quantum feedback control, in which sensors, controller, and actuators are themselves quantum systems that interact coherently with the system to be controlled. The resulting feedback loop preserves quantum coherence. Such coherent quantum feedback control is deterministic, non-destructive, and can be used to perform actions such as transferring quantum entanglement that are not possible using conventional feedback control of quantum systems. These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
In the conventional picture of quantum feedback control, sensors make measurements on a quantum system, a classical controller processes the results of the measurements, and semi-classical actuators act back on the system to alter its behavior. Quantum measurements are well known to yield probabilistic results and to introduce unavoidable disturbances in the system measured. Accordingly, quantum feedback is traditionally considered to be both probabilistic and destructive. This paper proposes and provides an experimental demonstration of an alternative method for quantum feedback control, in which sensors, controller, and actuators are themselves quantum systems that interact coherently with the system to be controlled. The resulting feedback loop preserves quantum coherence. Such coherent quantum feedback control is deterministic, non-destructive, and can be used to perform actions such as transferring quantum entanglement that are not possible using conventional feedback control of quantum systems. These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
In the conventional picture of quantum feedback, control sensors make measurements on a quantum system, a classical controller processes the results of the measurements, and semiclassical actuators act back on the system to alter its behavior. We describe and provide an experimental demonstration of an alternative method for quantum feedback control, in which the sensors, controller, and actuators of conventional feedback control are replaced with quantum systems that interact coherently with the system to be controlled. The resulting control system represents a fully coherent quantum feedback loop.
In the conventional picture of quantum feedback control, sensors perform measurements on the system, a classical controller processes the results of the measurements, and actuators supply semiclassical potentials to alter the behavior of the quantum system. In this picture, the sensors tend to destroy coherence in the process of making measurements, and although the controller can use the actuators to act coherently on the quantum system, it is processing and feeding back classical information. This paper proposes an alternative method for quantum feedback control, in which the sensors, controller, and actuators are quantum systems that interact coherently with the system to be controlled. In this picture, the controller gets, processes, and feeds back quantum information. Controllers that operate using such quantum feedback loops can perform tasks such as entanglement transfer that are not possible using classical feedback. Necessary and sufficient conditions are presented for Hamiltonian quantum systems to be controllable and observable using both classical and quantum feedback.
This paper discusses fully coherent quantum feedback control, in which the sensors, controller, and actuators are quantum systems and interact coherently with the system to be controlled: as a result, the entire feedback loop is coherent. Unlike conventional semiclassical feedback control of quantum systems, feedback control by quantum controllers is not stochastic, preserves the initial state of the controlled system, and can control quantum systems in ways that are not possible using conventional, incoherent feedback control. In particular, the target state to which the quantum controller drives the system can be entangled with another quantum system. This paper investigates quantum controllers and states necessary and sufficient conditions for a Hamiltonian quantum system to be observable and controllable by a quantum controller.
Coherent feedback is a non-measurement based, hence a back-action free, method of control for quantum systems. A typical application of this control scheme is squeezing enhancement, a purely non-classical effect in quantum optics. In this technical note we report its first experimental demonstration that well agrees with the theory taking into account time delays and losses in the coherent feedback loop. The results clarify both the benefit and the limitation of coherent feedback control in a practical situation.
The ubiquitous decoherence phenomenon is responsible for the lack of quantum superpositions at the macroscopic scale. It is increasingly difficult to isolate a quantum system from its environment when its size increases. Making use of the weird quantum properties of mesoscopic quantum states thus requires efficient means to combat decoherence. One option is real-time quantum feedback. It features the components of a conventional feedback: measurement of the system's state (sensor), analysis (controller), and feedback action (actuator) aiming to the target state. The random back-action of the measurements by the sensor makes quantum feedback much more difficult than its classical counterpart. Mesoscopic photon number (Fock) states feature a decoherence rate proportional to the photon number. They are thus a simple example of a fragile quantum resource. We demonstrated recently two quantum feedback schemes continuously stabilizing Fock state of a microwave field in a high-quality cavity. Sensitive atoms, crossing the field one at a time, are used as quantum nondemolition (QND) probes of its photon number. The feedback actuator is either a classical source [Sayrin et al., Nature (London) 477, 73 (2011)] or individual resonant atoms emitting or absorbing one photon each [Zhou et al., Phys. Rev. Lett. 108, 243602 (2012)]. Both schemes detect the quantum jumps of the photon number and efficiently correct their adverse effects, preparing and preserving a fragile quantum resource. We present an in-depth analysis of our methods, which sheds light onto the fundamental difficulties encountered in quantum feedback, in particular concerning the state estimation algorithm, and onto the ways to circumvent them. These results open the way to informationally optimal QND measurements or to the stabilization of mesoscopic field state superpositions. More generally, they can be cast in a variety of contexts to loosen the tight constraints set by decoherence in quantum metrology and quantum information processing.
Quantum control theory is profitably reexamined from the perspective of quantum information, two results on the role of quantum information technology in quantum feedback control are presented and two quantum feedback control schemes, teleportation-based distant quantum feedback control and quantum feedback control with quantum cloning, are proposed. In the first feedback scheme, the output from the quantum system to be controlled is fed back into the distant actuator via teleportation to alter the dynamics of system. The result theoretically shows that it can accomplish some tasks such as distant feedback quantum control that Markovian or Bayesian quantum feedback can not complete. In the second feedback strategy, the design of quantum feedback control algorithms is separated into a state recognition step, which gives "on-off" signal to the actuator through recognizing some copies from the cloning machine, and a feedback (control) step using another copies of cloning machine. A compromise between information acquisition and measurement disturbance is established, and this strategy can perform some quantum control tasks with coherent feedback.