Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Letters

Optical frequency generation using fiber Bragg grating filters for applications in portable quantum sensing

C. D. Macrae, Kai Bongs, Michael Holynski

Published Jan 15, 2021• 24 citations
Publisher

Abstract

A method for the agile generation of the optical frequencies required for laser cooling and atom interferometry of rubidium is demonstrated. It relies on fiber Bragg grating technology to filter the output of an electro-optic modulator and was demonstrated in an alignment-free, single-seed, frequency-doubled fiber laser system. The system was capable of frequency switching over a 30 GHz range in less than 40 ns, with ∼ 0.5 W output power and amplitude modulation with a ∼ 15 n s rise/fall time and an extinction ratio exceeding 80 dB. The technology is ideal for enabling high-bandwidth, mobile industrial, and space applications of quantum technologies.

DOI
10.1364/ol.415963

Related papers

Optical frequency generation using fiber Bragg grating filters for applications in portable quantum sensing

C. D. Macrae, Kai Bongs, Michael Holynski

A method for the agile generation of the optical frequencies required for laser cooling and atom interferometry of rubidium is demonstrated. It relies on fiber Bragg grating technology to filter the output of an electro-optic modulator and was demonstrated in a robust, alignment-free, single-seed, frequency-doubled, telecom fiber laser system. The system was capable of 50 ns frequency switching over a ~40 GHz range, ~0.5 W output power and amplitude modulation with a ~15 ns rise/fall time and an extinction ratio of 120 $\pm$ 2 dB. The technology is ideal for enabling high-bandwidth, mobile industrial and space applications of quantum technologies.

arXiv:2011.11143•Nov 23, 2020•3 citations

Robust single-sideband-modulated Raman light generation for atom interferometry by FBG-based optical rectangular filtration

Guochao Wang, YaNing Wang, Ying Bo Kang +10 more

Low-phase-noise and pure-spectrum Raman light is vital for high-precision atom interferometry by two-photon Raman transition. A preferred and prevalent solution for Raman light generation is electro-optic phase modulation. However, phase modulation inherently brings in double sidebands, resulting in residual sideband effects of multiple laser pairs beside Raman light in atom interferometry. Based on a well-designed rectangular fiber Bragg grating and a plain electro-optic modulator, optical single-sideband modulation has been realized at 1560 nm with a stable suppression ratio better than -25 dB despite of intense temperature variations. After optical filtration and frequency doubling, a robust phase-coherent Raman light at 780 nm is generated with a stable SNR of better than -19 dB and facilitates measuring the local gravity successfully. This FBG-based all-fiber single-sideband-modulated Raman light source, proposed for the first time and characterized as robust, compact and low-priced, is practical and potential for field applications of portable atom interferometry.

arXiv:2205.04875•Optics Express•Jul 15, 2022•17 citations

A compact laser system for a portable atom interferometry gravimeter

Qin Luo, Heng Zhang, Ke Zhang +4 more

A compact laser system for a portable 87Rb atom interferometry gravimeter has been demonstrated in this work. This laser system is based on frequency doubling of a single seed laser at the wavelength of 1560 nm. The frequency of the seed laser is controlled by a digital unit with an analog feedback circuit. By using this frequency control method, the frequency of the laser system can be shifted over 1 GHz. Based on this method, the Raman frequency can be locked on the F = 3 → F′ = 4 transition of 85Rb atoms. Moreover, the Raman sideband and the repumping laser are generated by a phase modulator, and it can generate different laser frequencies to meet the requirements of a typical atom interferometer. Additional sidebands in the Raman beam produced from the phase modulator are optimized and reduced, allowing us to observe atom interference with a free evolution time of 320 ms. The control unit including the laser system has been integrated into a box with a volume of 1.5 m × 0.6 m × 0.6 m, and the weight of which is only 150 kg. Using this compact optical scheme, our atomic gravimeter has achieved a sensitivity of 53 μGal/Hz1/2 and a resolution of better than 1 μGal (1 μGal = 1 × 10−8 m/s2) in an integration time of 3000 s.

Review of Scientific Instruments•Apr 1, 2019•43 citations

A phase-modulated laser system of ultra-low phase noise for compact atom interferometers

Ki-Se Lee, Jaewan Kim, Sang-Bum Lee +2 more

A compact and robust laser system is essential for mobile atom interferometers. Phase modulation can provide the two necessary phase-coherent frequencies without sophisticated phase-locking between two different lasers. However, the additional laser frequencies generated can perturb the atom interferometer. In this article, we report on a novel method to produce a single high-power laser beam composed of two phase-coherent sidebands without the perturbing carrier mode. Light from a diode laser is phase-modulated by using a fiber-coupled electro-optic modulator driven at 3.4 GHz and passes through a Fabry-Perot cavity with a 6.8 GHz free spectral range. The cavity filters the carrier mode to leave the two first-order sidebands for the two-photon Raman transition between the two hyperfine ground states of 87 Rb. The laser beam is then fed to a single tapered amplifier, and the two sidebands are both amplified without mode competition. The phase noise is lower than that of a state-of-the-art optically phase-locked external-cavity diode laser (−135 dBrad 2 /Hz at 10 kHz) at frequencies above 10 Hz. This technique can be used in all-fiber-based laser systems for future mobile atom interferometers.

Journal of the Korean Physical Society•Jul 1, 2015•13 citations

Wideband and low-spurious optical waveform generator for optically addressable quantum systems manipulation and control

Sacha Welinski, Eduardo Beattie, Lothaire Ulrich +4 more

Optical manipulation of quantum systems requires stable laser sources able to produce complex waveforms over a large frequency range. In the visible region, such waveforms can be generated using an acousto-optic modulator driven by an arbitrary waveform generator, but these suffer from a limited tuning range typically of a few tens of MHz. Visible-range electro-optic modulators are an alternative option offering a larger modulation bandwidth, however they have limited output power which drastically restricts the scalability of quantum applications. There is currently no architecture able to perform phase-stabilized waveforms over several GHz in the visible or near infrared region while providing sufficient optical power for quantum applications. Here we propose and develop a modulation and frequency conversion set-up able to deliver optical waveforms over a large frequency range, with a high spurious extinction ratio, scalable to the entire visible/near infrared region with high optical power. The optical waveforms are first generated at telecom wavelength and then converted to the emitter wavelength through a sum frequency generation process. By adapting the pump laser frequency, the optical waveforms can be tuned to interact with a broad range of optical quantum emitters or qubits such as alkali atoms, trapped ions, rare earth ions, or fluorescent defects in solid-state matrices. Using this architecture, we were able to detect and study a single erbium ion in a nanoparticle. We also generated high bandwidth signals at 606 nm, which would enable frequency multiplexing of on-demand read-out Pr3+:Y2SiO5 quantum memories.

Optics Express•May 13, 2024•1 citation

Compact stable fibre-based optical frequency filter

Jonathan P. Hedger, Andre Nicholas Luiten, Ben M. Sparkes

We demonstrate a robust, stable and compact spectral filter for use in quantum optics experiments by implementing Fabry-Pérot resonators within optical fibre using pairs of fibre Bragg gratings. With only temperature stabilisation, these devices show less than 20 MHz frequency drift over 12 hours with a maximum suppression of roughly 35 dB and overall transmission of 75%. These characteristics make fibre Bragg grating Fabry-Pérot resonators ideal for quantum optics experiments where single photon-level signals must be efficiently filtered from large optical fields.

•Dec 30, 2019•0 citations
A method for the agile generation of the optical frequencies required for laser cooling and atom interferometry of rubidium is demonstrated. It relies on fiber Bragg grating technology to filter the output of an electro-optic modulator and was demonstrated in an alignment-free, single-seed, frequency-doubled fiber laser system. The system was capable of frequency switching over a 30 GHz range in less than 40 ns, with ∼ 0.5 W output power and amplitude modulation with a ∼ 15 n s rise/fall time and an extinction ratio exceeding 80 dB. The technology is ideal for enabling high-bandwidth, mobile industrial, and space applications of quantum technologies.
A method for the agile generation of the optical frequencies required for laser cooling and atom interferometry of rubidium is demonstrated. It relies on fiber Bragg grating technology to filter the output of an electro-optic modulator and was demonstrated in a robust, alignment-free, single-seed, frequency-doubled, telecom fiber laser system. The system was capable of 50 ns frequency switching over a ~40 GHz range, ~0.5 W output power and amplitude modulation with a ~15 ns rise/fall time and an extinction ratio of 120 ±\pm± 2 dB. The technology is ideal for enabling high-bandwidth, mobile industrial and space applications of quantum technologies.
Low-phase-noise and pure-spectrum Raman light is vital for high-precision atom interferometry by two-photon Raman transition. A preferred and prevalent solution for Raman light generation is electro-optic phase modulation. However, phase modulation inherently brings in double sidebands, resulting in residual sideband effects of multiple laser pairs beside Raman light in atom interferometry. Based on a well-designed rectangular fiber Bragg grating and a plain electro-optic modulator, optical single-sideband modulation has been realized at 1560 nm with a stable suppression ratio better than -25 dB despite of intense temperature variations. After optical filtration and frequency doubling, a robust phase-coherent Raman light at 780 nm is generated with a stable SNR of better than -19 dB and facilitates measuring the local gravity successfully. This FBG-based all-fiber single-sideband-modulated Raman light source, proposed for the first time and characterized as robust, compact and low-priced, is practical and potential for field applications of portable atom interferometry.
A compact laser system for a portable 87Rb atom interferometry gravimeter has been demonstrated in this work. This laser system is based on frequency doubling of a single seed laser at the wavelength of 1560 nm. The frequency of the seed laser is controlled by a digital unit with an analog feedback circuit. By using this frequency control method, the frequency of the laser system can be shifted over 1 GHz. Based on this method, the Raman frequency can be locked on the F = 3 → F′ = 4 transition of 85Rb atoms. Moreover, the Raman sideband and the repumping laser are generated by a phase modulator, and it can generate different laser frequencies to meet the requirements of a typical atom interferometer. Additional sidebands in the Raman beam produced from the phase modulator are optimized and reduced, allowing us to observe atom interference with a free evolution time of 320 ms. The control unit including the laser system has been integrated into a box with a volume of 1.5 m × 0.6 m × 0.6 m, and the weight of which is only 150 kg. Using this compact optical scheme, our atomic gravimeter has achieved a sensitivity of 53 μGal/Hz1/2 and a resolution of better than 1 μGal (1 μGal = 1 × 10−8 m/s2) in an integration time of 3000 s.
A compact and robust laser system is essential for mobile atom interferometers. Phase modulation can provide the two necessary phase-coherent frequencies without sophisticated phase-locking between two different lasers. However, the additional laser frequencies generated can perturb the atom interferometer. In this article, we report on a novel method to produce a single high-power laser beam composed of two phase-coherent sidebands without the perturbing carrier mode. Light from a diode laser is phase-modulated by using a fiber-coupled electro-optic modulator driven at 3.4 GHz and passes through a Fabry-Perot cavity with a 6.8 GHz free spectral range. The cavity filters the carrier mode to leave the two first-order sidebands for the two-photon Raman transition between the two hyperfine ground states of 87 Rb. The laser beam is then fed to a single tapered amplifier, and the two sidebands are both amplified without mode competition. The phase noise is lower than that of a state-of-the-art optically phase-locked external-cavity diode laser (−135 dBrad 2 /Hz at 10 kHz) at frequencies above 10 Hz. This technique can be used in all-fiber-based laser systems for future mobile atom interferometers.
Optical manipulation of quantum systems requires stable laser sources able to produce complex waveforms over a large frequency range. In the visible region, such waveforms can be generated using an acousto-optic modulator driven by an arbitrary waveform generator, but these suffer from a limited tuning range typically of a few tens of MHz. Visible-range electro-optic modulators are an alternative option offering a larger modulation bandwidth, however they have limited output power which drastically restricts the scalability of quantum applications. There is currently no architecture able to perform phase-stabilized waveforms over several GHz in the visible or near infrared region while providing sufficient optical power for quantum applications. Here we propose and develop a modulation and frequency conversion set-up able to deliver optical waveforms over a large frequency range, with a high spurious extinction ratio, scalable to the entire visible/near infrared region with high optical power. The optical waveforms are first generated at telecom wavelength and then converted to the emitter wavelength through a sum frequency generation process. By adapting the pump laser frequency, the optical waveforms can be tuned to interact with a broad range of optical quantum emitters or qubits such as alkali atoms, trapped ions, rare earth ions, or fluorescent defects in solid-state matrices. Using this architecture, we were able to detect and study a single erbium ion in a nanoparticle. We also generated high bandwidth signals at 606 nm, which would enable frequency multiplexing of on-demand read-out Pr3+:Y2SiO5 quantum memories.
We demonstrate a robust, stable and compact spectral filter for use in quantum optics experiments by implementing Fabry-Pérot resonators within optical fibre using pairs of fibre Bragg gratings. With only temperature stabilisation, these devices show less than 20 MHz frequency drift over 12 hours with a maximum suppression of roughly 35 dB and overall transmission of 75%. These characteristics make fibre Bragg grating Fabry-Pérot resonators ideal for quantum optics experiments where single photon-level signals must be efficiently filtered from large optical fields.