Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Sensitive Radio-Frequency Measurements of a Quantum Dot by Tuning to Perfect Impedance Matching

Natalia Ares, Felix J. Schupp, Aquila Mavalankar, Rogers, G, Jonathan Griffiths, G. A. C. Jones, Ian A. Farrer, D. A. Ritchie, Charles G. Smith, Audrey Cottet, G. Andrew D. Briggs, Edward A. Laird

Published Mar 24, 2016• 46 citations
OpenAlex

Abstract

Electrical readout of spin qubits requires fast and sensitive measurements, which are hindered by poor impedance matching to the device. We demonstrate perfect impedance matching in a radio-frequency readout circuit, using voltage-tunable varactors to cancel out parasitic capacitances. An optimized capacitance sensitivity of 1.6 aF/√Hz is achieved at a maximum source-drain bias of 170−μV root-mean-square and with a bandwidth of 18 MHz. Coulomb blockade in a quantum-dot is measured in both conductance and capacitance, and the two contributions are found to be proportional as expected from a quasistatic tunneling model. We benchmark our results against the requirements for single-shot qubit readout using quantum capacitance, a goal that has so far been elusive.

Related papers

Sensitive Radio-Frequency Measurements of a Quantum Dot by Tuning to Perfect Impedance Matching

N. Ares, F. J. Schupp, A. Mavalankar +9 more

Electrical readout of spin qubits requires fast, sensitive measurements, which are hindered by poor impedance matching in a practical device. The authors demonstrate perfect impedance matching in an rf readout circuit, measure the absolute sensitivity to quantum capacitance changes, and establish a clear requirement for single-shot readout. This work will aid research not just in quantum computing, but also in nanomechanics and ac quantum transport.

arXiv:1510.06944•Physical Review Applied•Mar 24, 2016•63 citations

Quantum paraelectric varactors for radio-frequency measurements at mK temperatures

P. Apostolidis, Byron J. Villis, Jacob F. Chittock-Wood +5 more

Radio-frequency reflectometry allows for fast and sensitive electrical readout of charge and spin qubits hosted in quantum dot devices coupled to resonant circuits. Optimizing readout, however, requires frequency tuning of the resonators and impedance matching. This is difficult to achieve using conventional semiconductor or ferroelectric-based varactors in the detection circuit as their performance degrades significantly in the mK temperature range relevant for solid-state quantum devices. Here we explore a different type of material, strontium titanate, a quantum paraelectric with exceptionally large field-tunable permittivity at low temperatures. Using strontium titanate varactors we demonstrate perfect impedance matching and resonator frequency tuning at 6 mK and characterize the varactors at this temperature in terms of their capacitance tunability, dissipative losses and magnetic field sensitivity. We show that this allows us to optimize the radio-frequency readout signal-to-noise ratio of carbon nanotube quantum dot devices to achieve a charge sensitivity of 4.8 $μ$e/Hz$^{1/2}$ and capacitance sensitivity of 0.04 aF/Hz$^{1/2}$.

arXiv:2007.03588•Jul 7, 2020•3 citations

Quantum paraelectric varactors for radiofrequency measurements at millikelvin temperatures

P. Apostolidis, Byron J. Villis, Jacob F. Chittock-Wood +6 more

Abstract Radiofrequency reflectometry can provide fast and sensitive electrical read-out of charge and spin qubits in quantum dot devices coupled to resonant circuits. In situ frequency tuning and impedance matching of the resonator circuit using voltage-tunable capacitors (varactors) is needed to optimize read-out sensitivity, but the performance of conventional semiconductor- and ferroelectric-based varactors degrades substantially in the millikelvin temperature range relevant for solid-state quantum devices. Here we show that strontium titanate and potassium tantalate, materials which can exhibit quantum paraelectric behaviour with large field-tunable permittivity at low temperatures, can be used to make varactors with perfect impedance matching and resonator frequency tuning at 6 mK. We characterize the varactors at 6 mK in terms of their capacitance tunability, dissipative losses and magnetic field insensitivity. We use the quantum paraelectric varactors to optimize the radiofrequency read-out of carbon nanotube quantum dot devices, achieving a charge sensitivity of 4.8 μe Hz−1/2 and a capacitance sensitivity of 0.04 aF Hz−1/2.

Nature Electronics•Aug 5, 2024•12 citations

Inductor-shunted matching circuits for enhanced frequency multiplexibility in RF single electron transistors in silicon

Simpei Nishiyama, Raisei Mizokuchi, R. Matsuda +3 more

Frequency-multiplexed radio-frequency (RF) reflectometry is a promising technique for large-scale quantum dot-based qubit systems because it enables simultaneous readout of multiple qubits and helps to reduce the wiring density in peripheral circuits. However, in the conventional L-C-type matching circuits, resonator frequency tunability is limited by poor design flexibility of the shunt capacitance and hence the circuit. Recently, L-L-type matching circuits comprising a series and a shunt inductor have been proposed to address this issue. Here, we report RF reflectometry readout of silicon quantum dot-based charge sensors embedded in L-L-type circuits. We determine the inductance values for target resonance frequencies based on our equivalent circuit model that incorporates the parasitic elements of the inductors and demonstrate resonator frequency tunability of up to 1 GHz with 3-dB resonator bandwidths on the order of MHz. The measured conductance sensitivities, on the order of 10−5(e2/h)/Hz at 4 K, are only moderately dependent on the resonance frequency up to 630 MHz. These results highlight the prospects of L-L-type matching circuits for rapid and multiplex reflectometry readout of semiconductor spin qubits.

Applied Physics Letters•Mar 1, 2025•1 citation

Evaluation of a physically defined silicon quantum dot for design of matching circuit for RF reflectometry charge sensing

Jun Kamioka, R. Matsuda, Raisei Mizokuchi +2 more

This paper reports on the extraction of the equivalent circuit model parameters of a physically defined silicon quantum dot at a cryogenic temperature and design of the impedance matching circuits to improve the performance of a charge sensor for radio-frequency (RF) reflectometry. The I-V characteristics and the S-parameters of the quantum dot device are measured around a Coulomb peak at 4.2 K. The measured results are modeled by an RC parallel circuit, and the model parameters for the quantum dot device were obtained. We consider three impedance matching circuits for RF reflectometry of a quantum dot: shunt capacitor-series inductor type, shunt inductor-series capacitor type, and shunt inductor-series inductor-type. We formulate and compare the sensitivity and bandwidth of RF reflectometry for the three types of circuits. The analysis should be useful for selecting the optimal matching circuit and the circuit parameters for given equivalent circuit parameters and working frequency. This procedure is demonstrated for a quantum dot with the characterized model circuit along with simulated performance. This design technique of matching circuit for RF reflectometry can be applied to any device that can be represented by an RC parallel circuit. These results will facilitate to realize fast semiconductor qubit readout in various quantum dot platforms.

AIP Advances•Mar 1, 2023•4 citations

Cryogenic hyperabrupt strontium titanate varactors for sensitive reflectometry of quantum dots

Rafael S. Eggli, Simon Svab, Taras Patlatiuk +8 more

Radio-frequency reflectometry techniques enable high-bandwidth readout of semiconductor quantum dots. Careful impedance matching of the resonant circuit is required to achieve high sensitivity, which, however, proves challenging at cryogenic temperatures. Gallium arsenide--based voltage-tunable capacitors, so-called varactor diodes, can be used for in situ tuning of the circuit impedance but deteriorate and fail at temperatures below 10 K and in magnetic fields. Here, we investigate a varactor based on strontium titanate with a hyperabrupt capacitance-voltage characteristic, i.e., a capacitance tunability similar to the best gallium arsenide--based devices. The varactor design introduced here is compact, scalable, and easy to wire bond, with an accessible capacitance range from 45 pF to 3.2 pF. We tune a resonant inductor-capacitor circuit to perfect impedance matching and observe robust temperature- and field-independent matching down to 11 mK and up to 2 T in-plane field. Finally, we perform gate-dispersive charge sensing on a germanium-silicon core-shell nanowire hole double quantum dot, paving the way toward gate-based single-shot spin readout. Our results bring small magnetic field--resilient highly tunable varactors to mK temperatures, expanding the toolbox of cryo-radio-frequency applications.

arXiv:2303.02933•Physical Review Applied•Nov 28, 2023•14 citations
Electrical readout of spin qubits requires fast and sensitive measurements, which are hindered by poor impedance matching to the device. We demonstrate perfect impedance matching in a radio-frequency readout circuit, using voltage-tunable varactors to cancel out parasitic capacitances. An optimized capacitance sensitivity of 1.6 aF/√Hz is achieved at a maximum source-drain bias of 170−μV root-mean-square and with a bandwidth of 18 MHz. Coulomb blockade in a quantum-dot is measured in both conductance and capacitance, and the two contributions are found to be proportional as expected from a quasistatic tunneling model. We benchmark our results against the requirements for single-shot qubit readout using quantum capacitance, a goal that has so far been elusive.
Radio-frequency reflectometry allows for fast and sensitive electrical readout of charge and spin qubits hosted in quantum dot devices coupled to resonant circuits. Optimizing readout, however, requires frequency tuning of the resonators and impedance matching. This is difficult to achieve using conventional semiconductor or ferroelectric-based varactors in the detection circuit as their performance degrades significantly in the mK temperature range relevant for solid-state quantum devices. Here we explore a different type of material, strontium titanate, a quantum paraelectric with exceptionally large field-tunable permittivity at low temperatures. Using strontium titanate varactors we demonstrate perfect impedance matching and resonator frequency tuning at 6 mK and characterize the varactors at this temperature in terms of their capacitance tunability, dissipative losses and magnetic field sensitivity. We show that this allows us to optimize the radio-frequency readout signal-to-noise ratio of carbon nanotube quantum dot devices to achieve a charge sensitivity of 4.8 μμμe/Hz1/2^{1/2}1/2 and capacitance sensitivity of 0.04 aF/Hz1/2^{1/2}1/2.
Abstract Radiofrequency reflectometry can provide fast and sensitive electrical read-out of charge and spin qubits in quantum dot devices coupled to resonant circuits. In situ frequency tuning and impedance matching of the resonator circuit using voltage-tunable capacitors (varactors) is needed to optimize read-out sensitivity, but the performance of conventional semiconductor- and ferroelectric-based varactors degrades substantially in the millikelvin temperature range relevant for solid-state quantum devices. Here we show that strontium titanate and potassium tantalate, materials which can exhibit quantum paraelectric behaviour with large field-tunable permittivity at low temperatures, can be used to make varactors with perfect impedance matching and resonator frequency tuning at 6 mK. We characterize the varactors at 6 mK in terms of their capacitance tunability, dissipative losses and magnetic field insensitivity. We use the quantum paraelectric varactors to optimize the radiofrequency read-out of carbon nanotube quantum dot devices, achieving a charge sensitivity of 4.8 μe Hz−1/2 and a capacitance sensitivity of 0.04 aF Hz−1/2.
Frequency-multiplexed radio-frequency (RF) reflectometry is a promising technique for large-scale quantum dot-based qubit systems because it enables simultaneous readout of multiple qubits and helps to reduce the wiring density in peripheral circuits. However, in the conventional L-C-type matching circuits, resonator frequency tunability is limited by poor design flexibility of the shunt capacitance and hence the circuit. Recently, L-L-type matching circuits comprising a series and a shunt inductor have been proposed to address this issue. Here, we report RF reflectometry readout of silicon quantum dot-based charge sensors embedded in L-L-type circuits. We determine the inductance values for target resonance frequencies based on our equivalent circuit model that incorporates the parasitic elements of the inductors and demonstrate resonator frequency tunability of up to 1 GHz with 3-dB resonator bandwidths on the order of MHz. The measured conductance sensitivities, on the order of 10−5(e2/h)/Hz at 4 K, are only moderately dependent on the resonance frequency up to 630 MHz. These results highlight the prospects of L-L-type matching circuits for rapid and multiplex reflectometry readout of semiconductor spin qubits.
This paper reports on the extraction of the equivalent circuit model parameters of a physically defined silicon quantum dot at a cryogenic temperature and design of the impedance matching circuits to improve the performance of a charge sensor for radio-frequency (RF) reflectometry. The I-V characteristics and the S-parameters of the quantum dot device are measured around a Coulomb peak at 4.2 K. The measured results are modeled by an RC parallel circuit, and the model parameters for the quantum dot device were obtained. We consider three impedance matching circuits for RF reflectometry of a quantum dot: shunt capacitor-series inductor type, shunt inductor-series capacitor type, and shunt inductor-series inductor-type. We formulate and compare the sensitivity and bandwidth of RF reflectometry for the three types of circuits. The analysis should be useful for selecting the optimal matching circuit and the circuit parameters for given equivalent circuit parameters and working frequency. This procedure is demonstrated for a quantum dot with the characterized model circuit along with simulated performance. This design technique of matching circuit for RF reflectometry can be applied to any device that can be represented by an RC parallel circuit. These results will facilitate to realize fast semiconductor qubit readout in various quantum dot platforms.
Radio-frequency reflectometry techniques enable high-bandwidth readout of semiconductor quantum dots. Careful impedance matching of the resonant circuit is required to achieve high sensitivity, which, however, proves challenging at cryogenic temperatures. Gallium arsenide--based voltage-tunable capacitors, so-called varactor diodes, can be used for in situ tuning of the circuit impedance but deteriorate and fail at temperatures below 10 K and in magnetic fields. Here, we investigate a varactor based on strontium titanate with a hyperabrupt capacitance-voltage characteristic, i.e., a capacitance tunability similar to the best gallium arsenide--based devices. The varactor design introduced here is compact, scalable, and easy to wire bond, with an accessible capacitance range from 45 pF to 3.2 pF. We tune a resonant inductor-capacitor circuit to perfect impedance matching and observe robust temperature- and field-independent matching down to 11 mK and up to 2 T in-plane field. Finally, we perform gate-dispersive charge sensing on a germanium-silicon core-shell nanowire hole double quantum dot, paving the way toward gate-based single-shot spin readout. Our results bring small magnetic field--resilient highly tunable varactors to mK temperatures, expanding the toolbox of cryo-radio-frequency applications.