Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Vacuum and Optical Designs for an Open-access Trapped Ion Quantum Processor

Noah Greenberg

Published Sep 21, 2020• 1 citation
OpenAlex

Abstract

This thesis focuses on the design of a vacuum system for a trapped ion quantum computer that will house an advanced ion chip trap from Sandia National Laboratories, capable of performing high fidelity operations on up to tens of qubits. The thesis will outline the different design considerations, criteria, and serve to document the final design choices, in addition to optical design work that will be used to drive resonant atomic transitions in the qubit of choice, 133Ba+, as well as the qudit, 137Ba+.

Related papers

Implementing segmented ion trap designs for quantum computing

Gergely Imreh

With all the key elements of quantum computing in ion traps demonstrated by the research community, the focus is now placed on building more sophisticated traps with larger numbers of ions to allow practical scale information processing. One promising avenue is to store ions in and shuttle them between many independent traps which serve as potential interaction sites. The core of the work described in this thesis is the experimental evaluation of a microfabricated segmented ion trap, built by Sandia National Laboratories ("Sandia trap"). These experiments required construction of a wholly new optical setup including laser and detection systems, a vacuum system and control electronics. Among our experimental achievements were: successful loading of single and pairs of ions in the microscale trap, measurement of ion storage lifetime, measurement of the motional heating rate with a time-resolved Doppler-cooling method — which showed above than average heating, and implemented a single-ion shuttling method — which reliably transferred the ion through a distance of 360 μm (two DC electrode widths away) and back. These results have been used to improve the next version of the Sandia trap design. We also used computer modelling to study several aspects of ion traps: a mesoscopic ion trap designed for fast ion separation, simulated ion loading to quantify requirements for successful trapping in small and shallow traps, and analyzed a precise shuttling method — where the time dependence of the trapping potential is engineered such that there is minimal motional heating. The results show that ion trap arrays at the 100 μm distance scale are feasible and suggests that such multiple trap designs merit further study.

•Jan 1, 2008•5 citations

Building A Magnesium Ion Trap For Quantum Computation

Jiajia Zhou

Trapped ions are one of the best candidate systems to realize quantum computation. In our laboratory, we are trying to implement quantum computing and information processing: two hyperfine ground-states of magnesium-25 ions will serve as the two-level system to store quantum information. The ions are confined in a linear radio-frequency trap under ultra-high vacuum conditions and will be cooled down to their motional ground-states. By illuminating the ions with frequency-stabilized lasers we will be able to initialize, manipulate, and read out their internal electronic quantum states in a well-controlled way and with high fidelity. In addition, the ions can be made to interact with each other by coupling their internal electronic states to a collective vibrational mode of motion along the trap axis. In this thesis, the focus will be on the process of building a trapped-magnesium-ion quantum information processor.

•Aug 1, 2007•0 citations

Individual control of barium ion qubits for quantum information processing

Akbar Jahangiri Jozani, Xinghe Tan, Akimasa Ihara +6 more

We present our progress in developing a programmable quantum processor with up to 16 barium ion qubits. Our system utilizes barium's visible-wavelength transitions and long-lived quantum states. We use a Sandia-fabricated surface ion trap with 94 DC electrodes for precise confining potential control. Our hardware innovations include specialized methods for radioactive source preparation and a centrally mounted trap that enables high optical access from multiple directions while maintaining optimized vacuum pressure for long ion lifetime. We implement novel waveguide technology for controlling laser parameters at each ion with negligible crosstalk. As part of the Open Quantum Design initiative, this system will provide remote access for researchers.

Photonics for Quantum (PfQ)•Jul 18, 2025•0 citations

Microfabricated Surface Trap and Cavity Integration for Trapped Ion Quantum Computing

Van Rynbach, Jacques André

Atomic ions trapped in microfabricated surface traps can be utilized as a physical platform with which to build a quantum computer. They possess many of the desirable characteristics of such a device, including high fidelity state preparation and readout, universal logic gates, and long coherence times, and can be readily entangled with each other through photonic interconnects. The use of optical cavities integrated with trapped ion qubits as a photonic interface presents the possibility for order of magnitude improvements in performance in several key areas for their use in quantum computation. The first part of this thesis describes the design and fabrication of a novel surface trap for integration with an optical cavity. The trap is custom made on a highly reflective mirror surface and includes the capability of moving the ion trap location along all three trap axes with nanometer scale precision. The second part of this thesis demonstrates the suitability of small microcavities formed from laser ablated, fused silica substrates with radii of curvature in the 300-500 micron range for use with the mirror trap as part of an integrated ion trap cavity system. Quantum computing applications for such a system include dramatic improvements in the photon entanglement rate of up to 10 kHz, the qubit measurement time down to 1 microsecond, and the qubit measurement error rate down to the 1e-5 range. The final part of this thesis describes a performance simulator for exploring the physical resource requirements and performance demands to scale a quantum computer to sizes capable of implementing quantum algorithms beyond the limits of classical computation.

•Jan 1, 2016•0 citations

Design and construction of an ion trapping apparatus for quantum simulation experiments

Nikhil Kotibhaskar

The trapped ions platform represents an excellent framework for Quantum information science experiments. Long coherence times, extremely high state initialization and detection fidelity, inherent full-connectivity between qubits are some features that make trapped ions the ideal qubits. It is the same features that make this platform extremely suitable for quantum simulation of various physical phenomenon, particularly quantum spin models. In this thesis, I present the design and construction of an ion trapping apparatus for quantum simulation experiments. This apparatus is operational and is used for the trapping of ionized Yb atoms. The 6 electrodes of the trap, two of which are needle electrodes, are made out of tungsten. I discuss the unique technique we use to make tungsten needle electrodes. The design, construction, and testing of the Yb source, used to produce a thermal beam of Yb atoms, is also discussed. The apparatus discussed above needs to be housed inside an ultra-high vacuum environment to keep the ions free from background collisions. I have discussed the design and construction of the vacuum system. In the end, I have provided a brief overview of the system in the lab and presented results in the form of pictures of single and multiple trapped ions.

•Sep 26, 2019•0 citations

Integrated photonics for trapped ion quantum information experiments at Sandia National Laboratories

Hayden McGuinness, Michael R. Gehl, Craig Hogle +11 more

As trapped ion systems add more ions to allow for increasingly sophisticated quantum processing and sensing capabilities, the traditional optical-mechanical laboratory infrastructure that make such systems possible are in some cases the limiting factor in further growth of the systems. One promising solution is to integrate as many, if not all, optical components such as waveguides and gratings, single-photon detectors, and high extinction ratio optical switches/modulators either into ion traps themselves or into auxiliary devices that can be easily integrated with ion traps. Here we report on recent efforts at Sandia National Laboratories to include integrated photonics in our surface ion trap platforms.

Quantum Nanophotonic Materials, Devices, and Systems•Oct 4, 2022•4 citations
This thesis focuses on the design of a vacuum system for a trapped ion quantum computer that will house an advanced ion chip trap from Sandia National Laboratories, capable of performing high fidelity operations on up to tens of qubits. The thesis will outline the different design considerations, criteria, and serve to document the final design choices, in addition to optical design work that will be used to drive resonant atomic transitions in the qubit of choice, 133Ba+, as well as the qudit, 137Ba+.
With all the key elements of quantum computing in ion traps demonstrated by the research community, the focus is now placed on building more sophisticated traps with larger numbers of ions to allow practical scale information processing. One promising avenue is to store ions in and shuttle them between many independent traps which serve as potential interaction sites. The core of the work described in this thesis is the experimental evaluation of a microfabricated segmented ion trap, built by Sandia National Laboratories ("Sandia trap"). These experiments required construction of a wholly new optical setup including laser and detection systems, a vacuum system and control electronics. Among our experimental achievements were: successful loading of single and pairs of ions in the microscale trap, measurement of ion storage lifetime, measurement of the motional heating rate with a time-resolved Doppler-cooling method — which showed above than average heating, and implemented a single-ion shuttling method — which reliably transferred the ion through a distance of 360 μm (two DC electrode widths away) and back. These results have been used to improve the next version of the Sandia trap design. We also used computer modelling to study several aspects of ion traps: a mesoscopic ion trap designed for fast ion separation, simulated ion loading to quantify requirements for successful trapping in small and shallow traps, and analyzed a precise shuttling method — where the time dependence of the trapping potential is engineered such that there is minimal motional heating. The results show that ion trap arrays at the 100 μm distance scale are feasible and suggests that such multiple trap designs merit further study.
Trapped ions are one of the best candidate systems to realize quantum computation. In our laboratory, we are trying to implement quantum computing and information processing: two hyperfine ground-states of magnesium-25 ions will serve as the two-level system to store quantum information. The ions are confined in a linear radio-frequency trap under ultra-high vacuum conditions and will be cooled down to their motional ground-states. By illuminating the ions with frequency-stabilized lasers we will be able to initialize, manipulate, and read out their internal electronic quantum states in a well-controlled way and with high fidelity. In addition, the ions can be made to interact with each other by coupling their internal electronic states to a collective vibrational mode of motion along the trap axis. In this thesis, the focus will be on the process of building a trapped-magnesium-ion quantum information processor.
We present our progress in developing a programmable quantum processor with up to 16 barium ion qubits. Our system utilizes barium's visible-wavelength transitions and long-lived quantum states. We use a Sandia-fabricated surface ion trap with 94 DC electrodes for precise confining potential control. Our hardware innovations include specialized methods for radioactive source preparation and a centrally mounted trap that enables high optical access from multiple directions while maintaining optimized vacuum pressure for long ion lifetime. We implement novel waveguide technology for controlling laser parameters at each ion with negligible crosstalk. As part of the Open Quantum Design initiative, this system will provide remote access for researchers.
Atomic ions trapped in microfabricated surface traps can be utilized as a physical platform with which to build a quantum computer. They possess many of the desirable characteristics of such a device, including high fidelity state preparation and readout, universal logic gates, and long coherence times, and can be readily entangled with each other through photonic interconnects. The use of optical cavities integrated with trapped ion qubits as a photonic interface presents the possibility for order of magnitude improvements in performance in several key areas for their use in quantum computation. The first part of this thesis describes the design and fabrication of a novel surface trap for integration with an optical cavity. The trap is custom made on a highly reflective mirror surface and includes the capability of moving the ion trap location along all three trap axes with nanometer scale precision. The second part of this thesis demonstrates the suitability of small microcavities formed from laser ablated, fused silica substrates with radii of curvature in the 300-500 micron range for use with the mirror trap as part of an integrated ion trap cavity system. Quantum computing applications for such a system include dramatic improvements in the photon entanglement rate of up to 10 kHz, the qubit measurement time down to 1 microsecond, and the qubit measurement error rate down to the 1e-5 range. The final part of this thesis describes a performance simulator for exploring the physical resource requirements and performance demands to scale a quantum computer to sizes capable of implementing quantum algorithms beyond the limits of classical computation.
The trapped ions platform represents an excellent framework for Quantum information science experiments. Long coherence times, extremely high state initialization and detection fidelity, inherent full-connectivity between qubits are some features that make trapped ions the ideal qubits. It is the same features that make this platform extremely suitable for quantum simulation of various physical phenomenon, particularly quantum spin models. In this thesis, I present the design and construction of an ion trapping apparatus for quantum simulation experiments. This apparatus is operational and is used for the trapping of ionized Yb atoms. The 6 electrodes of the trap, two of which are needle electrodes, are made out of tungsten. I discuss the unique technique we use to make tungsten needle electrodes. The design, construction, and testing of the Yb source, used to produce a thermal beam of Yb atoms, is also discussed. The apparatus discussed above needs to be housed inside an ultra-high vacuum environment to keep the ions free from background collisions. I have discussed the design and construction of the vacuum system. In the end, I have provided a brief overview of the system in the lab and presented results in the form of pictures of single and multiple trapped ions.
As trapped ion systems add more ions to allow for increasingly sophisticated quantum processing and sensing capabilities, the traditional optical-mechanical laboratory infrastructure that make such systems possible are in some cases the limiting factor in further growth of the systems. One promising solution is to integrate as many, if not all, optical components such as waveguides and gratings, single-photon detectors, and high extinction ratio optical switches/modulators either into ion traps themselves or into auxiliary devices that can be easily integrated with ion traps. Here we report on recent efforts at Sandia National Laboratories to include integrated photonics in our surface ion trap platforms.