The focus of this paper is directed towards the investigation of the characteristics of symbol-by-symbol iterative decoding algorithms for error-correcting block product-codes (block turbo-codes) which enable to reliable information transfer at relatively low received signal/noise and provide high power efficiency. Specific feature of investigated product codes is construction with usage of low-density parity-check codes (LDPC) and these code constructions are in the class of LDPC too. According to this fact the considered code constructions have symbol-by-symbol decoding algorithms developed for total class LDPC codes, namely BP (belief propagation) and its modification MIN_SUM_BP. The BP decoding algorithm is iterative and for implementation the signal/noise is required, for implementation of MIN_SUM_BP decoding algorithm the signal/noise is not required. The resulted characteristics of product codes constructed with usage of LDPC based on project geometry (length of code words, information volume, code rate, error performances) are presented in this paper. These component LDPC codes are cyclic and have encoding and decoding algorithms with low complexity implementation. The computer simulations for encoding and iterative symbol-by-symbol decoding algorithms for the number of turbo-codes with different code rate and information volumes are performed. The results of computer simulations have shown that MIN_SUM_BP decoding algorithm is more effective than BP decoding algorithm for channel with additive white gaussian noise concerning error-performances.
The focus of this paper is directed towards the investigation of the characteristics of symbol-by-symbol iterative decoding algorithms for error-correcting block product-codes (block turbo-codes) which enable to reliable information transfer at relatively low received signal/noise and provide high power efficiency. Specific feature of investigated product codes is construction with usage of low-density parity-check codes (LDPC) and these code constructions are in the class of LDPC too. According to this fact the considered code constructions have symbol-by-symbol decoding algorithms developed for total class LDPC codes, namely BP (belief propagation) and its modification MIN_SUM_BP. The BP decoding algorithm is iterative and for implementation the signal/noise is required, for implementation of MIN_SUM_BP decoding algorithm the signal/noise is not required. The resulted characteristics of product codes constructed with usage of LDPC based on project geometry (length of code words, information volume, code rate, error performances) are presented in this paper. These component LDPC codes are cyclic and have encoding and decoding algorithms with low complexity implementation. The computer simulations for encoding and iterative symbol-by-symbol decoding algorithms for the number of turbo-codes with different code rate and information volumes are performed. The results of computer simulations have shown that MIN_SUM_BP decoding algorithm is more effective than BP decoding algorithm for channel with additive white gaussian noise concerning error-performances.
Many classes of high-performance Low-density parity check codes are based on parity check matrices composed of permutation sub matrices. The emulation-simulation framework further allows the algorithm and implementation to be iteratively redefined to improve the error floor performance of message passing decoder. Log-Like hood-Ratio (LLR) based Belief-Propagation (BP) algorithm is presented for Low Density Parity Check codes. Numerically accurate representation of check node update computation used in LLR-BP decoding is described. The implementation of Sum-Product algorithm (SPA) within Low Density Parity Check Code (LDPC) decoder is described in this paper and the correction term is used to improve the decoding performance of min-sum algorithm (MSA). Quantization and log-tanh function approximation in sum-product decoder strongly affect which absorbing set dominates in error floor region. For LDPC decoder, bit error rate (BER) decreases with increase in the signal to noise ratio.
Low Density Parity Check (LDPC) codes are one of the block coding techniques that can approach the Shannon’s limit within a fraction of a decibel for high block lengths. In many digital communication systems, these codes have strong competitors of turbo codes for error control. LDPC codes performance depends on the excellent design of parity check matrix and many diverse research methods have been used by different study groups to evaluate the performance. Unlike many other classes of codes, LDPC codes are already equipped with a fast, probabilistic decoding algorithm. This makes LDPC codes not only attractive from a theoretical point of view, but also very suitable for practical applications. This paper throws hard decision and soft decision algorithm of LDPC. The hard decision algorithm contains Bit flipping algorithm and Soft decoding algorithm contains Sum product algorithm which is used to correct burst error. Sum Product algorithm is also called as belief propagation. Bit flipping and Sum Product algorithms are explained and can be implemented for the generated parity check matrix of (1016x508) for LDPC code with code rate 1/2.
Channel coding technique is a fundamental building block in any modern communication system to realize reliable, fast, and secure data transmission. At the same time, it is a challenging and crucial task, as the data transmission happens in a channel where noise, fading, and other impairments are present. The Low-Density Parity-Check (LDPC) codes give substantial results close to the Shannon limit when the complexity and processing delay time are unlimited. In this paper, the performance of the LDPC decoding with four algorithms was investigated. The investigated four algorithms were Belief Propagation (BP), Layered Belief Propagation (LBP), Normalized min-sum (NMS), and Offset min-sum (OMS). These algorithms were examined for code rates ranging from 1/3 to 9/10 and message block lengths (64, 512, 1024, and 5120) bits. The simulation results revealed the flexibility of these decoders in supporting these code rates and block lengths, which enables their usage in a wide range of applications and scenarios for fifth-generation (5G) wireless communication. In addition, the effect of the maximum number of decoding iterations on the error correction performance was investigated, and a gain of 5.6 dB can be obtained by using 32 decoding iterations at BER=2*10-3 instead of one decoding iteration. The results showed that the decoders performed better for longer message blocks than for short message blocks, and less power was required for transmitting longer messages. Finally, the comparison results of their performance in terms of bit error rate (BER) under the same conditions showed a gain of 0.8 dB using LBP at BER= 10-5 compared with the NMS decoding algorithm.
In this digital era, modern communication systems play an essential part in nearly every aspect of life, with examples ranging from mobile networks and satellite communications to Internet and data transfer. Unfortunately, all communication systems in a practical setting are noisy, which indicates that we can either improve the physical characteristics of the channel or find a possible systematical solution, i.e. error control coding. The history of error control coding dates back to 1948 when Claude Shannon published his celebrated work “A Mathematical Theory of Communication”, which built a framework for channel coding, source coding and information theory. For the first time, we saw evidence for the existence of channel codes, which enable reliable communication as long as the information rate of the code does not surpass the so-called channel capacity. Nevertheless, in the following 60 years none of the codes have been proven closely to approach the theoretical bound until the arrival of turbo codes and the renaissance of LDPC codes. As a strong contender of turbo codes, the advantages of LDPC codes include parallel implementation of decoding algorithms and, more crucially, graphical construction of codes. However, there are also some drawbacks to LDPC codes, e.g. significant performance degradation due to the presence of short cycles or very high decoding latency. In this thesis, we will focus on the practical realisation of finite-length LDPC codes and devise algorithms to tackle those issues.
Firstly, rate-compatible (RC) LDPC codes with short/moderate block lengths are investigated on the basis of optimising the graphical structure of the tanner graph (TG), in order to achieve a variety of code rates (0.1 < R < 0.9) by only using a single encoder-decoder pair. As is widely recognised in the literature, the presence of short cycles considerably reduces the overall performance of LDPC codes which significantly limits their application in communication systems. To reduce the impact of short cycles effectively for different code rates, algorithms for counting short cycles and a graph-related metric called Extrinsic Message Degree (EMD) are applied with the development of the proposed puncturing and extension techniques. A complete set of simulations are carried out to demonstrate that the proposed RC designs can largely minimise the performance loss caused by puncturing or extension.
Secondly, at the decoding end, we study novel decoding strategies which compensate for the negative effect of short cycles by reweighting part of the extrinsic messages exchanged between the nodes of a TG. The proposed reweighted belief propagation (BP) algorithms aim to implement efficient decoding, i.e. accurate signal reconstruction and low decoding latency, for LDPC codes via various design methods. A variable factor appearance probability belief propagation (VFAP-BP) algorithm is proposed along with an improved version called a locally-optimized reweighted (LOW)-BP algorithm, both of which can be employed to enhance decoding performance significantly for regular and irregular LDPC codes. More importantly, the optimisation of reweighting parameters only takes place in an offline stage so that no additional computational complexity is required during the real-time decoding process.
Lastly, two iterative detection and decoding (IDD) receivers are presented for multiple-input multiple-output (MIMO) systems operating in a spatial multiplexing configuration. QR decomposition (QRD)-type IDD receivers utilise the proposed multiple-feedback (MF)-QRD or variable-M (VM)-QRD detection algorithm with a standard BP decoding algorithm, while knowledge-aided (KA)-type receivers are equipped with a simple soft parallel interference cancellation (PIC) detector and the proposed reweighted BP decoders. In the uncoded scenario, the proposed MF-QRD and VM-QRD algorithms are shown to approach optimal performance, yet require a reduced computational complexity. In the LDPC-coded scenario, simulation results have illustrated that the proposed QRD-type IDD receivers can offer near-optimal performance after a small number of detection/decoding iterations and the proposed KA-type IDD receivers significantly outperform receivers using alternative decoding algorithms, while requiring similar decoding complexity.
Error control coding is an essential part of modern communications systems. LDPC codes have been demonstrated to offer performance near the fundamental limits of channels corrupted by random noise. Optimal maximum likelihood decoding of LDPC codes is too complex to be practically useful even at short block lengths and so a graph-based message passing decoder known as the belief propagation algorithm is used instead. In fact, on graphs without closed paths known as cycles the iterative message passing decoding is known to be optimal and may converge in a single iteration, although identifying the message update schedule which allows single-iteration convergence is not trivial. At finite block lengths graphs without cycles have poor minimum distance properties and perform poorly even under optimal decoding. LDPC codes with large block length have been demonstrated to offer performance close to that predicted for codes of infinite length, as the cycles present in the graph are quite long. In this thesis, LDPC codes of shorter length are considered as they offer advantages in terms of latency and complexity, at the cost of performance degradation from the increased number of short cycles in the graph. For these shorter LDPC codes, the problems considered are: \n \nFirst, improved construction of structured and unstructured LDPC code graphs of short length with a view to reducing the harmful effects of the cycles on error rate performance, based on knowledge of the decoding process. Structured code graphs are particularly interesting as they allow benefits in encoding and decoding complexity and speed. Secondly, the design and construction of LDPC codes for the block fading channel, a particularly challenging scenario from the point of view of error control code design. Both established and novel classes of codes for the channel are considered. Finally the decoding of LDPC codes by the belief propagation algorithm is considered, in particular the scheduling of messages passed in the iterative decoder. A knowledge-aided approach is developed based on message reliabilities and residuals to allow fast convergence and significant improvements in error rate performance.
In the information theory , the non- binary low density parity check (NB-LDPC) code is a linear error correcting code , a method of transmitting message over a noisy transmission channel. LDPCcodes are capacity-approaching codes , which means that practical constructions exist that allow the noise threshold to be set very close to the theoretical maximum for a symmetric memory less channel.Using iterative belief propagation techniques, NB-LDPC codes can be decoded in time linear to their block length. Non-binary low-density parity-check codes can achieve higher performance than their binary counterparts. Recently, two algorithms were developed for decoding NB-LDPC codes: iterative hard reliability-based majority-logic decoding (IHRB-MLGD) and iterative soft reliability-based majority-logic decoding (ISRB-MLGD has better performance-complexity tradeoffs than previous algorithms. This paper first proposes message-passing in such a way that we can reduce the memory consumption to a greater extent at the same time there should not be performance loss. By using enhanced iterative reliability-based majority-logic decoding algorithms we can achieve effective complexity-performance and noise free design. Compared to previous designs, our proposed decoders have at least tens of times lower complexity with moderate coding gain loss.