Multilayered Heater Nanocryotron: A Superconducting-Nanowire-Based Thermal Switch
Reza Baghdadi, Jason P. Allmaras, Brenden Butters, Andrew E. Dane, Saleem Iqbal, Adam N. McCaughan, Emily Toomey, Qingyuan Zhao, Alexander G. Kozorezov, Karl K. Berggren
We demonstrate a multilayer nanoscale cryogenic heater-based switch (M-hTron) that uses a normal-metal heater overlapping a thin-film superconductor separated by a thin insulating layer. The M-hTron eliminates leakage current found in three-terminal superconducting switches and applies heat locally to the superconductor, reducing the energy required to switch the device. Modeling using the energy-balance equations and the acoustic mismatch model demonstrates reasonable agreement with experiment. The M-hTron is a promising device for digital superconducting electronics that require high fan-out and offers the possibility of enhancing readout for superconducting-nanowire single-photon detectors.
We demonstrate a multilayer nanoscale cryogenic heater-based switch (M-hTron) that uses a normal-metal heater overlapping a thin-film superconductor separated by a thin insulating layer. The M-hTron eliminates leakage current found in three-terminal superconducting switches and applies heat locally to the superconductor, reducing the energy required to switch the device. Modeling using the energy-balance equations and the acoustic mismatch model demonstrates reasonable agreement with experiment. The M-hTron is a promising device for digital superconducting electronics that require high fan-out and offers the possibility of enhancing readout for superconducting-nanowire single-photon detectors.
Efficiently simulating large circuits is crucial to the development of superconducting nanowire-based electronics. However, current simulation tools for this technology are not adapted to the scaling of circuit size and complexity. We focus on the multilayered heater-nanocryotron (hTron), a promising superconducting nanowire-based switch used in applications such as superconducting nanowire single-photon detector (SNSPD) readout. Previously, the hTron was modeled using traditional finite-element methods (FEM), which fall short in simulating systems at a larger scale. An empirical-based method would be better adapted to this task, enhancing both simulation speed and agreement with experimental data. In this work, we perform switching current and activation delay measurements on 17 hTron devices. We then develop a method for extracting physical fitting parameters used to characterize the devices. We build a SPICE behavioral model that reproduces the static and transient device behavior using these parameters, and validate it by comparing its performance to a model developed in prior work, showing an improvement in simulation time by several orders of magnitude. Our model provides circuit designers with a tool to help understand the hTron's behavior during all design stages, thus enabling broader use of the hTron across various new areas of application.
Superconducting electronics based on Josephson junctions are used to sense and process electronic signals with minimal loss; however, they are ultrasensitive to magnetic fields, limited in their amplification capabilities, and difficult to manufacture. We have developed a 3-terminal, nanowire-based superconducting electrothermal device which has no Josephson junctions. This device, which we call the nanocryotron, can be patterned from a single thin film of superconducting material with conventional electron-beam lithography. The nanocryotron has a demonstrated gain of >20, can drive impedances of 100 kΩ, and operates in typical ambient magnetic fields. We have additionally applied it both as a digital logic element in a half-adder circuit, and as a digital amplifier for superconducting nanowire single-photon detectors pulses. The nanocryotron has immediate applications in classical and quantum communications, photon sensing, and astronomy, and its input characteristics are suitable for integration with existing superconducting technologies.
Superconducting electronics have emerged as a promising platform for advanced information processing, offering unique opportunities for on chip computation and signal manipulation at cryogenic temperatures. These devices hold particular potential in applications ranging from quantum computing to high sensitivity magnetic sensing, where integrated logic and scalable circuit architectures are essential for performing complex computational and signal-processing tasks. In this work, we present a dual-input multilayered heater nanocryotron (hTron) that introduces both multi input functionality and reconfigurable logic capability within a single device. This capability represents a step forward toward realizing more complex computational architectures. In addition, we demonstrate that these devices can, in principle, drive one another and potentially be integrated on a larger scale. Furthermore, the inherent reconfigurability of the demonstrated device allows for dynamic switching between logic operations without requiring additional components which reduces circuit area and simplifies cryogenic and biasing requirements, making the design highly suitable for scalable superconducting computing systems.
Superconducting electronics are among the most promising alternatives to conventional CMOS technology, thanks to the ultra-fast speed and ultra-high energy efficiency of the superconducting devices. Having a cryogenic control processor is also a crucial requirement for scaling the existing quantum computers up to thousands of qubits. Despite showing outstanding speed and energy efficiency, Josephson junction-based circuits suffer from several challenges such as flux trapping leading to limited scalability, difficulty in driving high impedances, and so on. Three-terminal cryotron devices have been proposed to solve these issues, which can drive high impedances (>100 kΩ) and are free from any flux trapping issue. In this work, we develop a reconfigurable logic circuit using a heater cryotron (hTron). In conventional approaches, the number of devices to perform a logic operation typically increases with the number of inputs. However, here, we demonstrate a single hTron device-based logic circuit that can be reconfigured to perform 1-input copy and NOT, 2-input AND and OR, and 3-input majority logic operations by choosing suitable biasing conditions. Consequently, we can perform any processing task with a much smaller number of devices. Also, since we can perform different logic operations with the same circuit (same layout), we can develop a camouflaged system where all the logic gates will have the same layout. Therefore, this proposed circuit will ensure enhanced hardware security against reverse engineering attacks.
High Resolution Image Download MS PowerPoint Slide Due to stringent thermal budgets in cryogenic technologies such as superconducting quantum computers and sensors, electronic building blocks that simultaneously offer low energy consumption, fast switching, low error rates, a small footprint, and simple fabrication are pivotal for large-scale devices. Here, we demonstrate a superconducting switch with attojoule switching energy, high speed (pico-second rise/fall times), and high integration density (on the order of 10 –2 μm 2 per switch). It consists of a superconducting nanochannel and a metal heater separated by an insulating silica layer. We experimentally demonstrate digital gate operations utilizing these nanostructures, such as NOT, NAND, NOR, AND, and OR gates, with a few femtojoules of energy consumption and ultralow bit error rates <10 –8 . In addition, we build energy-efficient volatile memory elements with nanosecond operation speeds and a retention time over 10 5 s. These superconducting switches open new possibilities for increasing the size and complexity of modern cryogenic technologies.
We present a design for a superconducting nanowire binary shift register, which stores digital states in the form of circulating supercurrents in high-kinetic-inductance loops. Adjacent superconducting loops are connected with nanocryotrons, three-terminal electrothermal switches, and fed with an alternating two-phase clock to synchronously transfer the digital state between the loops. A two-loop serial-input shift register was fabricated with thin-film NbN and a bit error rate of less than 10−4 was achieved, when operated at a maximum clock frequency of 83 MHz and in an out-of-plane magnetic field of up to 6 mT. A shift register based on this technology offers an integrated solution for low-power readout of superconducting nanowire single photon detector arrays and is capable of interfacing directly with room-temperature electronics and operating unshielded in high magnetic field environments.