Variable-density imaging of high concentration of NV centers with three-dimensional optical scanning techniques at sub-micrometer scale in millimeter area
Zongmin Ma, Liumin Niu, Jiuyan Wei, Yunbo Shi, Li Qin, Jun Tang, Jun Liu, Yanjun Li, Yasuhiro Sugawara
Abstract In order to enhance the spin-dependent fluorescence signal coupled with outer fields, accurate positioning of the center of nitrogen-vacancy (NV) in bulk diamond is important in enhancing the sensitivity of the solid-state quantum magnetometry. In this paper, we have developed a new approach of three-dimensional optical scanning techniques for the imaging of variable-density of high concentration of NV centers in the interior of the diamond at the micrometer scale. The research defined the definite trajectories of electrons with different energies to generate NV – centers in diamond based on Monte-Carlo simulation results. Moreover, it also confirmed experimentally that the accurate location for the center of NV – in the diamond is at the depth of 100 μ m, using three-dimensional optical vertical scanning techniques. This research paves the way to produce various depth-confined NV centers, with high coherence, important in wide-field magnetometry applications.
Abstract In order to enhance the spin-dependent fluorescence signal coupled with outer fields, accurate positioning of the center of nitrogen-vacancy (NV) in bulk diamond is important in enhancing the sensitivity of the solid-state quantum magnetometry. In this paper, we have developed a new approach of three-dimensional optical scanning techniques for the imaging of variable-density of high concentration of NV centers in the interior of the diamond at the micrometer scale. The research defined the definite trajectories of electrons with different energies to generate NV – centers in diamond based on Monte-Carlo simulation results. Moreover, it also confirmed experimentally that the accurate location for the center of NV – in the diamond is at the depth of 100 μ m, using three-dimensional optical vertical scanning techniques. This research paves the way to produce various depth-confined NV centers, with high coherence, important in wide-field magnetometry applications.
Abstract The nitrogen-vacancy (NV) center in diamond is a promising quantum system for magnetometry applications exhibiting optical readout of minute energy shifts in its spin sub-levels. Key material requirements for NV ensembles are a high NV − concentration, a long spin coherence time and a stable charge state. However, these are interdependent and can be difficult to optimize during diamond growth and subsequent NV creation. In this work, we systematically investigate the NV center formation and properties in bulk chemical vapor deposition (CVD) diamond. The nitrogen flow during growth is varied by over four orders of magnitude, resulting in a broad range of single substitutional nitrogen concentrations of 0.2–20 parts per million. For a fixed nitrogen concentration, we optimize electron-irradiation fluences with two different accelerated electron energies, and we study defect formation via optical characterizations. We discuss a general approach to determine the optimal irradiation conditions, for which an enhanced NV concentration and an optimum of NV charge states can both be satisfied. We achieve spin–spin coherence times T 2 ranging from 45.5 to 549 μ s for CVD diamonds containing 168 to 1 parts per billion NV − centers, respectively. This study shows a pathway to engineer properties of NV-doped CVD diamonds for improved sensitivity.
Abstract We developed a versatile Quasi-finite-element scanning method to analyse the concentration and homogeneity of the ensembles of nitrogen-vacancy (NV − ) centres in block diamonds. In this method, 13 μ m × 13 μ m area of the bulk diamond with high-density NV − centres was divided into small pieces at the nanoscale by using a focused light beam. The concentration of NV − centres was obtained and imaged through the fluorescence intensity of each pixel by employing a home-built spectrometer. In addition, global and local homogeneities were introduced to evaluate the NV − centre distribution. NV − centres in a specific pixel exhibited preferred direction growth peaks attributed to the diamond crystal orientation. Moreover, the uniformity of NV − centres was not proportional to the electron irradiation duration, but an optimal time was observed. This study can be beneficial for enhancing the sensitivities of bulk magnetometry based on confocal systems.
Nitrogen-vacancy (NV) color centers in diamond are excellent quantum sensors possessing high sensitivity and nano-scale spatial resolution. Their integration in photonic structures is often desired, since it leads to an increased photon emission and also allows the realization of solid-state quantum technology architectures. Here, we report the fabrication of diamond nano-pillars with diameters up to 1000 nm by electron beam lithography and inductively coupled plasma reactive ion etching in nitrogen-rich diamonds (type Ib) with [100] and [111] crystal orientations. The NV centers were created by keV-He ion bombardment and subsequent annealing, and we estimate an average number of NVs per pillar to be 4300 ± 300 and 520 ± 120 for the [100] and [111] samples, respectively. Lifetime measurements of the NVs’ excited state showed two time constants with average values of τ1 ≈ 2 ns and τ2 ≈ 8 ns, which are shorter as compared to a single color center in a bulk crystal (τ ≈ 10 ns). This is probably due to a coupling between the NVs as well as due to interaction with bombardment-induced defects and substitutional nitrogen (P1 centers). Optically detected magnetic resonance measurements revealed a contrast of about 5% and average coherence and relaxation times of T2 [100] = 420 ± 40 ns, T2 [111] = 560 ± 50 ns, and T1 [100] = 162 ± 11 μs, T1 [111] = 174 ± 24 μs. These pillars could find an application for scanning probe magnetic field imaging.
Nitrogen-vacancy (NV) color centers in diamond have emerged as a focal point in quantum technology research due to their exceptional optical and electronic spin properties. This discovery not only expands our understanding of the material properties of diamond but also paves the way for practical applications in quantum technology. As a solid-state spin quantum system characterized by long electron spin coherence times and stable performance, NV color centers offer distinct advantages in quantum information processing. Recent advancements have enabled the fabrication of high-quality NV color centers with controllable concentration and spatial positioning through techniques such as in situ doping, ion implantation, and hybrid approaches. These technological breakthroughs have significantly enhanced the efficiency of NV center fabrication, thereby establishing a robust foundation for their widespread application in quantum sensing and quantum information technologies. This review provides a comprehensive introduction to the structure and fundamental properties of NV color centers in diamond, an in-depth analysis of recent progress in their fabrication techniques, and a critical discussion of their current applications in quantum science and technology. Additionally, the challenges, open questions, and future research directions in NV color center studies are addressed.
Abstract Diamond membrane devices containing optically coherent nitrogen-vacancy (NV) centers are key to enable novel cryogenic experiments such as optical ground-state cooling of hybrid spin-mechanical systems and efficient entanglement distribution in quantum networks. Here, we report on the fabrication of a (3.4 ± 0.2) μm thin, smooth (surface roughness rq < 0.4 nm over an area of 20 μm by 30 μm) diamond membrane containing individually resolvable, narrow linewidth (< 100 MHz) NV centers. We fabricate this sample via a combination of high-energy electron irradiation, high-temperature annealing, and an optimized etching sequence found via a systematic study of the diamond surface evolution on the microscopic level in different etch chemistries. Although our particular device dimensions are optimized for cavity-enhanced entanglement generation between distant NV centers in open, tunable microcavities, our results have implications for a broad range of quantum experiments that require the combination of narrow optical transitions and micrometer-scale device geometry.
High-resolution wide-spectrum measurement techniques have important applications in fields such as astronomy, wireless communication, and medical imaging. Nitrogen-vacancy (NV) center in diamond is well known for its high stability, high sensitivity, real-time monitoring, single-point detection, and suitability for long-term measurement, and has an outstanding choice for spectrum analyzers. Currently, spectrum analyzers based on NV centers as detectors can perform real-time spectrum analysis in the range of several tens of gigahertz, but their frequency resolution is limited to a MHz level. In this study, we construct a quantum diamond microwave spectrum imaging system by combining continuous wave-mixing techniques. According to the spin-related properties of the NV center in diamond, we implement optical pumping by 532 nm green laser light illuminating the diamond NV center. A spherical magnet is used to produce a magnetic field gradient along the direction of the diamond crystal. By adjusting the size and direction of the magnetic field gradient, spatial encoding of the resonance frequency of the NV center is achieved. The magnetic field gradient induces the Zeeman effect on the diamond surface at different positions, generating corresponding ODMR signals. Through accurate programming, we coordinate the frequency scanning step size of the microwave source with the camera exposure and image storage time, and synchronize them circularly according to the order of image acquisition. Ultimately, after algorithmic processing, we successfully obtain comprehensive spectrum data in a range from 900 MHz to 6.0 GHz. Within the measurable spectrum range, the system employs continuous wave-mixing, simultaneously applying resonant microwaves and slightly detuning auxiliary microwaves to effectively excite the NV center. This method triggers off microwave interference effects, disrupting the balance between laser-induced polarization and microwave-induced spontaneous relaxation. Specifically, microwave interference causes the phase and amplitude of the fluorescence signal to change, leading to the generation of alternating current fluorescence signals. This further enhances the response of the NV magnetometer to weak microwave signals. The method enables the system to achieve a frequency resolution of 1 Hz in the measurable spectrum range, and it can separately measure the frequency resolution of multiple frequency points with a frequency step size of 1 MHz. The research results indicate that the wide-spectrum measurement based on NV centers can achieve sub-hertz frequency resolution, providing robust technical support for future spectrum analysis and applications.