Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Acta Physica Sinica

High-frequency resolution diamond nitrogen-vacancy center wide-spectrum imaging technology

Yuanyuan Shen, Bo Wang, Dongqian Ke, Doudou Zheng, Zhonghao Li, Huanfei Wen, Hao Guo, Xin Li, Jun Tang, Zongmin Ma, Yan Jun Li, Vladimirovich Yaminsky Igor, Jun Liu

Published Jan 1, 2024• 0 citations
Publisher

Abstract

High-resolution wide-spectrum measurement techniques have important applications in fields such as astronomy, wireless communication, and medical imaging. Nitrogen-vacancy (NV) center in diamond is well known for its high stability, high sensitivity, real-time monitoring, single-point detection, and suitability for long-term measurement, and has an outstanding choice for spectrum analyzers. Currently, spectrum analyzers based on NV centers as detectors can perform real-time spectrum analysis in the range of several tens of gigahertz, but their frequency resolution is limited to a MHz level. In this study, we construct a quantum diamond microwave spectrum imaging system by combining continuous wave-mixing techniques. According to the spin-related properties of the NV center in diamond, we implement optical pumping by 532 nm green laser light illuminating the diamond NV center. A spherical magnet is used to produce a magnetic field gradient along the direction of the diamond crystal. By adjusting the size and direction of the magnetic field gradient, spatial encoding of the resonance frequency of the NV center is achieved. The magnetic field gradient induces the Zeeman effect on the diamond surface at different positions, generating corresponding ODMR signals. Through accurate programming, we coordinate the frequency scanning step size of the microwave source with the camera exposure and image storage time, and synchronize them circularly according to the order of image acquisition. Ultimately, after algorithmic processing, we successfully obtain comprehensive spectrum data in a range from 900 MHz to 6.0 GHz. Within the measurable spectrum range, the system employs continuous wave-mixing, simultaneously applying resonant microwaves and slightly detuning auxiliary microwaves to effectively excite the NV center. This method triggers off microwave interference effects, disrupting the balance between laser-induced polarization and microwave-induced spontaneous relaxation. Specifically, microwave interference causes the phase and amplitude of the fluorescence signal to change, leading to the generation of alternating current fluorescence signals. This further enhances the response of the NV magnetometer to weak microwave signals. The method enables the system to achieve a frequency resolution of 1 Hz in the measurable spectrum range, and it can separately measure the frequency resolution of multiple frequency points with a frequency step size of 1 MHz. The research results indicate that the wide-spectrum measurement based on NV centers can achieve sub-hertz frequency resolution, providing robust technical support for future spectrum analysis and applications.

DOI
10.7498/aps.73.20231833

Related papers

Wide bandwidth instantaneous radio frequency spectrum analyzer based on nitrogen vacancy centers in diamond

Mayeul Chipaux, Loïc Toraille, C. Larat +4 more

We propose an original analog method to perform instantaneous and quantitative spectral analysis of microwave signals. An ensemble of nitrogen-vacancy (NV) centers held in a diamond plate is pumped by a 532 nm laser. Its photoluminescence is imaged through an optical microscope and monitored by a digital camera. An incoming microwave signal is converted into a microwave field in the area of the NV centers by a loop shaped antenna. The resonances induced by the magnetic component of that field are detected through a decrease of the NV centers photoluminescence. A magnetic field gradient induces a Zeeman shift of the resonances and transforms the frequency information into spatial information, which allows for the simultaneous analysis of the microwave signal in the entire frequency bandwidth of the device. The time dependent spectral analysis of an amplitude modulated microwave signal is demonstrated over a bandwidth of 600 MHz, associated to a frequency resolution of 7 MHz , and a refresh rate of 4 ms. With such integration time, a field of a few hundreds of μW can be detected. Since the optical properties of NV centers can be maintained even in high magnetic field, we estimate that an optimized device could allow frequency analysis in a range of 30 GHz, only limited by the amplitude of the magnetic field gradient. In addition, an increase of the NV centers quantity could lead both to an increase of the microwave sensitivity and to a decrease of the minimum refresh rate down to a few μs.

arXiv:1509.01395•Applied Physics Letters•Dec 7, 2015•58 citations

A compact radiofrequency spectrum analyzer based on nitrogen-vacancy centers in diamond

Ludovic Mayer, Simone Magaletti, Ovidiu Brinza +4 more

We have realized a compact radiofrequency spectrum analyzer based on nitrogen-vacancy (NV) color centers in diamond. The RF spectral components are spatially encoded by means of a Zeeman shift of the NV resonances induced by a magnetic field gradient. The fluorescence of the NV centers is imaged on a CMOS detector array using a gradient index lens. The spectral components of the signal are revealed by the appearance of dark lines in the image. We observed frequencies up to 10 GHz, with a resolution of a few MHz and a RF sensitivity of the order of 100 µW.

Quantum Sensing and Nano Electronics and Photonics•Mar 15, 2023•0 citations

Simultaneous Identification of Multiple Microwave Signals in 313-MHz Continuous Bandwidth Using Nitrogen-Vacancy Centers in Diamond

Y. W. Jin, Huan Fei Wen, Ding Wang +8 more

The efficient and reliable detection of microwave signals is a key element of the breakthrough in new-generation communication technology. In this article, we proposed an approach for the simultaneous identification of multiple microwave signals in a continuous frequency range based on the spectral hole-burning effect of nitrogen-vacancy (NV) centers. The protocol combines the quantum wide-field imaging method with magnetic gradient means, breaking the narrowband and discrete detection limitations of conventional optically detected magnetic resonance (ODMR) techniques. The frequencies of multiple microwave signals can be accurately decoupled by locating the relevant gaps on resonance frequency curves. Meanwhile, the effects induced by fixed-frequency signals with different powers on the resonance frequency curves were systematically analyzed. The experimental results indicated that the system realized a multiple-frequency resolution of 1 MHz and a minimum detectable power of 1 mW over a continuous bandwidth of 313-MHz. This proposal is capable of real-time and simultaneous detection of multiple microwave signals, which remarkably improves the utilization efficiency of spectrum resources.

IEEE Transactions on Microwave Theory and Techniques•Jul 30, 2024•0 citations

Ensemble de centres azote-lacune dans le diamant pour l'analyse de signaux radiofréquences

Simone Magaletti

The nitrogen-vacancy center (NV) is a diamond spin defect consisting of a nitrogen atom and a carbon vacancy in two adjacent positions of the diamond lattice. Its remarkable spin-dependent optical properties make it a promising platform for quantum sensing and quantum information applications.In the present manuscript, two applications involving an ensemble of NV centers in diamond are investigated: a radio frequency (RF) spectrum analyser and a widefield imaging technique of the RF radiation emitted in near field by microwave devices.In the first chapter, the NV centers in diamond, their properties and the motivations behind the two NV centers based applications proposed in this manuscript are presented. The available solutions and the state-of-the-art techniques for both RF spectral analysis and near field imaging of RF radiation are reviewed and the potential of alternative solutions using NV centres are discussed.In the second chapter, a set-up for the widefield optical detection of the NV centers spin resonances is presented and used to investigate the main properties of this diamond defect. The NV center electron spin resonances are detected over a large frequency range (more than 10 GHz) and different phenomena are investigated: the behaviour of an ensemble of NV centers under a static magnetic field, the polarization properties of the NV center photoluminescence (PL) and how they can be exploited to recognise the NV centers orientations, the NV’s nitrogen nuclear spin polarization over a large frequency range (more than 2 GHz).The third chapter is devoted to the implementation of a real-time RF spectrum analyser based on an ensemble of NV centers. The main physical features of NV centers considered as MW detectors are investigated and an experimental architecture which allows a real time RF spectral analysis over a tuneable frequency range (10 MHz to 25 GHz), 4 GHz bandwidth, a MHz frequency resolution and a ms time resolution is demonstrated. The implementation of this device required an interesting analysis on the behaviour of an ensemble of NV centers under strong magnetic field gradient (tens of Tesla per meter) which is detailed in the chapter.The fourth and last chapter deals with the widefield imaging of RF field based on an ensemble of NV centers. Two techniques are proposed. The first is based on the RF power broadening of the NV center spin resonances in the continuous regime domain while the second is based on the widefield detection of NV centers Rabi oscillations in a pulsed regime. Both techniques allowed reconstructing the magnetic near field RF field emitted by a loop antenna. However, while the first technique requires a calibration to retrieve the amplitude of the RF field, the second allows a direct measurement of it. The widefield detection of the NV centers Rabi oscillations has thus been investigated both by means of experiments and simulations. Since the NV centers Rabi oscillations detected using our widefield experimental set-up showed an asymmetric shape, a model has been realized to figure out the NV centers behaviour during the pulse sequence employed to drive the Rabi oscillation. The results of the simulations, in agreement with the experimental results, enable to have a better insight of the NV center spin optical polarization and readout during the widefield detection of the Rabi oscillations.

•Dec 15, 2021•0 citations

High-resolution and wide-frequency-range magnetic spectroscopy with solid-state spin ensembles

Zechuan Yin, Justin J. Welter, Connor Hart +2 more

Quantum systems composed of solid-state electronic spins can be sensitive detectors of narrowband magnetic fields. A prominent example is the nitrogen-vacancy (NV) center in diamond, which has been employed for magnetic spectroscopy with high spatial and spectral resolution. However, NV-diamond spectroscopy protocols are typically based on dynamical decoupling sequences, which are limited to low-frequency signals ( ≲ 20 MHz) due to the technical requirements on microwave (MW) pulses used to manipulate NV electronic spins. In this work, we experimentally demonstrate a high-resolution magnetic spectroscopy protocol that integrates a quantum frequency mixing (QFM) effect in a dense NV ensemble with coherently averaged synchronized readout (CASR) to provide both a wide range of signal frequency detection and sub-Hz spectral resolution. We assess the sensitivity of this QFM-CASR protocol across a frequency range of 10 MHz to 4 GHz. By measuring the spectra of multi-frequency signals near 0.6, 2.4 and 4 GHz, we demonstrate sub-Hz spectral resolution with a nT-scale noise floor for the target signal, and precise phase measurement with error < 1 ∘ . Compared to state-of-the-art NV-diamond techniques for high-resolution magnetic spectroscopy, the QFM-CASR protocol extends the signal frequency range by more than an order of magnitude, enabling applications in radio frequency (RF) and MW signal microscopy and analysis, as well as tesla-scale nuclear magnetic resonance (NMR) spectroscopy of small samples.

npj Quantum Information•Dec 3, 2025•2 citations

Detuning-insensitive wide-field imaging of vector microwave fields with diamond sensors

Xiu-Qi Chen, Rui-Zhi Zhang, Gang-Qin Liu +1 more

Nitrogen vacancy (NV) centers in diamond have precipitated profound advances in microwave detection, manifesting themselves both in spatial resolution and sensitivity. However, typical methods based on Rabi oscillations are subject to detunings due to thermal and magnetic fluctuations and/or gradients, which introduce systematic errors and render the measurements susceptible to environmental perturbations. Here, we propose and demonstrate a novel approach for determining both the magnitude and direction of microwaves, by exploiting the spectral line broadening effect in the optically detected magnetic resonance of NV centers. This method eliminates the requirement of aligning the MW frequency to the spin transitions and is therefore immune to variations and inhomogeneities of the magnetic field and temperature, providing an optimal tool for fast imaging applications. With this method, we achieved wide-field imaging of near field microwaves generated with a microscale $\rmΩ$-pattern antenna with a resolution of 800\,nm. Combining with the vector detection using multi-axis NVs, a full reconstruction of the vector microwave fields is obtained. Besides, our scheme also exhibits excellent linearity over a broad range of MW amplitudes, and the scale is theoretically calculated to be more than four orders. Our results augment the applicability of diamond-based microwave devices in applications under complex scenarios, especially where large dynamic range, fast test speed, and high spatial resolution are demanded.

physics.ins-detCross-listedarXiv:2512.05986•Dec 1, 2025
High-resolution wide-spectrum measurement techniques have important applications in fields such as astronomy, wireless communication, and medical imaging. Nitrogen-vacancy (NV) center in diamond is well known for its high stability, high sensitivity, real-time monitoring, single-point detection, and suitability for long-term measurement, and has an outstanding choice for spectrum analyzers. Currently, spectrum analyzers based on NV centers as detectors can perform real-time spectrum analysis in the range of several tens of gigahertz, but their frequency resolution is limited to a MHz level. In this study, we construct a quantum diamond microwave spectrum imaging system by combining continuous wave-mixing techniques. According to the spin-related properties of the NV center in diamond, we implement optical pumping by 532 nm green laser light illuminating the diamond NV center. A spherical magnet is used to produce a magnetic field gradient along the direction of the diamond crystal. By adjusting the size and direction of the magnetic field gradient, spatial encoding of the resonance frequency of the NV center is achieved. The magnetic field gradient induces the Zeeman effect on the diamond surface at different positions, generating corresponding ODMR signals. Through accurate programming, we coordinate the frequency scanning step size of the microwave source with the camera exposure and image storage time, and synchronize them circularly according to the order of image acquisition. Ultimately, after algorithmic processing, we successfully obtain comprehensive spectrum data in a range from 900 MHz to 6.0 GHz. Within the measurable spectrum range, the system employs continuous wave-mixing, simultaneously applying resonant microwaves and slightly detuning auxiliary microwaves to effectively excite the NV center. This method triggers off microwave interference effects, disrupting the balance between laser-induced polarization and microwave-induced spontaneous relaxation. Specifically, microwave interference causes the phase and amplitude of the fluorescence signal to change, leading to the generation of alternating current fluorescence signals. This further enhances the response of the NV magnetometer to weak microwave signals. The method enables the system to achieve a frequency resolution of 1 Hz in the measurable spectrum range, and it can separately measure the frequency resolution of multiple frequency points with a frequency step size of 1 MHz. The research results indicate that the wide-spectrum measurement based on NV centers can achieve sub-hertz frequency resolution, providing robust technical support for future spectrum analysis and applications.
We propose an original analog method to perform instantaneous and quantitative spectral analysis of microwave signals. An ensemble of nitrogen-vacancy (NV) centers held in a diamond plate is pumped by a 532 nm laser. Its photoluminescence is imaged through an optical microscope and monitored by a digital camera. An incoming microwave signal is converted into a microwave field in the area of the NV centers by a loop shaped antenna. The resonances induced by the magnetic component of that field are detected through a decrease of the NV centers photoluminescence. A magnetic field gradient induces a Zeeman shift of the resonances and transforms the frequency information into spatial information, which allows for the simultaneous analysis of the microwave signal in the entire frequency bandwidth of the device. The time dependent spectral analysis of an amplitude modulated microwave signal is demonstrated over a bandwidth of 600 MHz, associated to a frequency resolution of 7 MHz , and a refresh rate of 4 ms. With such integration time, a field of a few hundreds of μW can be detected. Since the optical properties of NV centers can be maintained even in high magnetic field, we estimate that an optimized device could allow frequency analysis in a range of 30 GHz, only limited by the amplitude of the magnetic field gradient. In addition, an increase of the NV centers quantity could lead both to an increase of the microwave sensitivity and to a decrease of the minimum refresh rate down to a few μs.
We have realized a compact radiofrequency spectrum analyzer based on nitrogen-vacancy (NV) color centers in diamond. The RF spectral components are spatially encoded by means of a Zeeman shift of the NV resonances induced by a magnetic field gradient. The fluorescence of the NV centers is imaged on a CMOS detector array using a gradient index lens. The spectral components of the signal are revealed by the appearance of dark lines in the image. We observed frequencies up to 10 GHz, with a resolution of a few MHz and a RF sensitivity of the order of 100 µW.
The efficient and reliable detection of microwave signals is a key element of the breakthrough in new-generation communication technology. In this article, we proposed an approach for the simultaneous identification of multiple microwave signals in a continuous frequency range based on the spectral hole-burning effect of nitrogen-vacancy (NV) centers. The protocol combines the quantum wide-field imaging method with magnetic gradient means, breaking the narrowband and discrete detection limitations of conventional optically detected magnetic resonance (ODMR) techniques. The frequencies of multiple microwave signals can be accurately decoupled by locating the relevant gaps on resonance frequency curves. Meanwhile, the effects induced by fixed-frequency signals with different powers on the resonance frequency curves were systematically analyzed. The experimental results indicated that the system realized a multiple-frequency resolution of 1 MHz and a minimum detectable power of 1 mW over a continuous bandwidth of 313-MHz. This proposal is capable of real-time and simultaneous detection of multiple microwave signals, which remarkably improves the utilization efficiency of spectrum resources.
The nitrogen-vacancy center (NV) is a diamond spin defect consisting of a nitrogen atom and a carbon vacancy in two adjacent positions of the diamond lattice. Its remarkable spin-dependent optical properties make it a promising platform for quantum sensing and quantum information applications.In the present manuscript, two applications involving an ensemble of NV centers in diamond are investigated: a radio frequency (RF) spectrum analyser and a widefield imaging technique of the RF radiation emitted in near field by microwave devices.In the first chapter, the NV centers in diamond, their properties and the motivations behind the two NV centers based applications proposed in this manuscript are presented. The available solutions and the state-of-the-art techniques for both RF spectral analysis and near field imaging of RF radiation are reviewed and the potential of alternative solutions using NV centres are discussed.In the second chapter, a set-up for the widefield optical detection of the NV centers spin resonances is presented and used to investigate the main properties of this diamond defect. The NV center electron spin resonances are detected over a large frequency range (more than 10 GHz) and different phenomena are investigated: the behaviour of an ensemble of NV centers under a static magnetic field, the polarization properties of the NV center photoluminescence (PL) and how they can be exploited to recognise the NV centers orientations, the NV’s nitrogen nuclear spin polarization over a large frequency range (more than 2 GHz).The third chapter is devoted to the implementation of a real-time RF spectrum analyser based on an ensemble of NV centers. The main physical features of NV centers considered as MW detectors are investigated and an experimental architecture which allows a real time RF spectral analysis over a tuneable frequency range (10 MHz to 25 GHz), 4 GHz bandwidth, a MHz frequency resolution and a ms time resolution is demonstrated. The implementation of this device required an interesting analysis on the behaviour of an ensemble of NV centers under strong magnetic field gradient (tens of Tesla per meter) which is detailed in the chapter.The fourth and last chapter deals with the widefield imaging of RF field based on an ensemble of NV centers. Two techniques are proposed. The first is based on the RF power broadening of the NV center spin resonances in the continuous regime domain while the second is based on the widefield detection of NV centers Rabi oscillations in a pulsed regime. Both techniques allowed reconstructing the magnetic near field RF field emitted by a loop antenna. However, while the first technique requires a calibration to retrieve the amplitude of the RF field, the second allows a direct measurement of it. The widefield detection of the NV centers Rabi oscillations has thus been investigated both by means of experiments and simulations. Since the NV centers Rabi oscillations detected using our widefield experimental set-up showed an asymmetric shape, a model has been realized to figure out the NV centers behaviour during the pulse sequence employed to drive the Rabi oscillation. The results of the simulations, in agreement with the experimental results, enable to have a better insight of the NV center spin optical polarization and readout during the widefield detection of the Rabi oscillations.
Quantum systems composed of solid-state electronic spins can be sensitive detectors of narrowband magnetic fields. A prominent example is the nitrogen-vacancy (NV) center in diamond, which has been employed for magnetic spectroscopy with high spatial and spectral resolution. However, NV-diamond spectroscopy protocols are typically based on dynamical decoupling sequences, which are limited to low-frequency signals ( ≲ 20 MHz) due to the technical requirements on microwave (MW) pulses used to manipulate NV electronic spins. In this work, we experimentally demonstrate a high-resolution magnetic spectroscopy protocol that integrates a quantum frequency mixing (QFM) effect in a dense NV ensemble with coherently averaged synchronized readout (CASR) to provide both a wide range of signal frequency detection and sub-Hz spectral resolution. We assess the sensitivity of this QFM-CASR protocol across a frequency range of 10 MHz to 4 GHz. By measuring the spectra of multi-frequency signals near 0.6, 2.4 and 4 GHz, we demonstrate sub-Hz spectral resolution with a nT-scale noise floor for the target signal, and precise phase measurement with error < 1 ∘ . Compared to state-of-the-art NV-diamond techniques for high-resolution magnetic spectroscopy, the QFM-CASR protocol extends the signal frequency range by more than an order of magnitude, enabling applications in radio frequency (RF) and MW signal microscopy and analysis, as well as tesla-scale nuclear magnetic resonance (NMR) spectroscopy of small samples.
Nitrogen vacancy (NV) centers in diamond have precipitated profound advances in microwave detection, manifesting themselves both in spatial resolution and sensitivity. However, typical methods based on Rabi oscillations are subject to detunings due to thermal and magnetic fluctuations and/or gradients, which introduce systematic errors and render the measurements susceptible to environmental perturbations. Here, we propose and demonstrate a novel approach for determining both the magnitude and direction of microwaves, by exploiting the spectral line broadening effect in the optically detected magnetic resonance of NV centers. This method eliminates the requirement of aligning the MW frequency to the spin transitions and is therefore immune to variations and inhomogeneities of the magnetic field and temperature, providing an optimal tool for fast imaging applications. With this method, we achieved wide-field imaging of near field microwaves generated with a microscale Ω\rmΩΩ-pattern antenna with a resolution of 800\,nm. Combining with the vector detection using multi-axis NVs, a full reconstruction of the vector microwave fields is obtained. Besides, our scheme also exhibits excellent linearity over a broad range of MW amplitudes, and the scale is theoretically calculated to be more than four orders. Our results augment the applicability of diamond-based microwave devices in applications under complex scenarios, especially where large dynamic range, fast test speed, and high spatial resolution are demanded.