Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Emerging Imaging and Sensing Technologies for Security and Defence; and Advanced Manufacturing Technologies for Micro- and Nanosystems in Security and Defence

Including the vacuum in the post-selected model of quantum illumination

Shannon M. Ray, Paul M. Alsing

Published Sep 18, 2020• 0 citations
Publisher

Abstract

In the paper by Weedbrook et. al,1 a post-selected model of Lloyd's original formulation of quantum illumination (QI)2 was used to show that quantum discord explains the underlying advantage of QI over conventional illumination. The same model was used by Ray et. al3 to show that the normalized Hilbert-Schmidt inner product (HSIP) is a valid distinguishability measure when analyzing quantum illumination. This post-selected model assumes that the detector always detects a photon whether it be from the signal or noise from the environment; thus, the vacuum is excluded from this model. In this paper, we include the vacuum back into these analyses. In the case of,1 we show that the conclusion is unaffected by the inclusion of the vacuum. We then analyze the effects of including the vacuum when distinguishing between a noisy signal and noise. In this analysis, we found that the normalized HSIP is not monotonic with respect to the parameter that controls the brightness of the noise. Because of this, the normalized Hilbert-Schmidt inner product cannot be used as a distinguishability as was seen in the post-selected model. To reconcile this problem, we used the proposed alternative fidelity measure defined in,4 and found that it is monotonic in the vacuum added model for all the examples considered.

DOI
10.1117/12.2574058

Related papers

The Hilbert Schmidt inner product, quantum illumination, and beyond

Shannon M. Ray, Paul M. Alsing

Quantum Illumination (QI)1 is a proposed remote targeting protocol using entangled states in which the experimenter sends a signal towards an expected target in a noisy environment that has a probability of reflecting off the surface or, in the case of no surface, being lost. Upon return, the noisy signal is jointly measured with the idler, which has been held in local memory, to determine if the surface has been detected. The idler effectively increases the brightness of the noisy signal to help distinguish it from the surrounding noise. Even though the returned mixed state is in the un-entangled regime, it has been shown that QI outperforms a conventional protocol that only sends separable states as the signal. We analyzed QI as a quantum channel discrimination protocol and circumvented computational issues that rely on diagonalization of the quantum states by using the normalized Hilbert-Schmidt (NH-S) inner product as a measure of state distinguishability.2 Because the NH-S inner product is simple to compute, for a choice of entangled pure state and bipartition, we were able to rank the performance of QI entirely in terms of the dimension of the composite Hilbert space and the purity of the idler subsystem. We also showed that the greatest advantage gained by quantum illumination over conventional illumination occurs when one uses a Bell state, and for a fixed dimension d, the optimal performance of QI is achieved when the purity of the idler subsystem is minimal. In this talk, we review the results of,2 and present our progress on extending this analysis to a broader class of quantum information protocols beyond QI.

•Sep 19, 2019•1 citation

Performance Analysis for High-Dimensional Bell-State Quantum Illumination

Jeffrey H. Shapiro

Quantum illumination (QI) is an entanglement-based protocol for improving LiDAR/radar detection of unresolved targets beyond what a classical LiDAR/radar of the same average transmitted energy can do. Originally proposed by Seth Lloyd as a discrete-variable quantum LiDAR, it was soon shown that his proposal offered no quantum advantage over its best classical competitor. Continuous-variable, specifically Gaussian-state, QI has been shown to offer a true quantum advantage, both in theory and in table-top experiments. Moreover, despite its considerable drawbacks, the microwave version of Gaussian-state QI continues to attract research attention. A recent QI study by Armanpreet Pannu, Amr Helmy, and Hesham El Gamal (PHE), however, has: (i) combined the entangled state from Lloyd’s QI with the channel models from Gaussian-state QI; (ii) proposed a new positive operator-valued measurement for that composite setup; and (iii) claimed that, unlike Gaussian-state QI, PHE QI achieves the Nair–Gu lower bound on QI target-detection error probability at all noise brightnesses. PHE’s analysis was asymptotic, i.e., it presumed infinite-dimensional entanglement. The current paper works out the finite-dimensional performance of PHE QI. It shows that there is a threshold value for the entangled-state dimensionality below which there is no quantum advantage, and above which the Nair–Gu bound is approached asymptotically. Moreover, with both systems operating with error-probability exponents 1 dB lower than the Nair–Gu bound, PHE QI requires enormously higher entangled-state dimensionality than does Gaussian-state QI to achieve useful error probabilities in both high-brightness (100 photons/mode) and moderate-brightness (1 photon/mode) noise. Furthermore, neither system has an appreciable quantum advantage in low-brightness (much less than 1 photon/mode) noise.

arXiv:2409.08574•Physics•Mar 3, 2025•0 citations

Quantum illumination with a light absorbing target

Rivu Gupta, Saptarshi Roy, Tamoghna Das +1 more

In a quantum illumination (QI) protocol, the task is to detect the presence of the target which is typically modelled by a partially reflecting beam splitter. We analyze the performance of QI when the target absorbs part of the light that falls on it, thereby making the scenario more realistic. We present an optical setup that models a target with these characteristics and explore its detectability in the quantum domain in terms of the Chernoff bound (CB). For an idler-free setup, we use the coherent state for QI while the two mode squeezed vacuum (TMSV) state is employed in the signal-idler scheme. In both the cases, we report an absorption-induced enhancement of the detection efficiency indicated by a lowering of CB with increasing amounts of absorption. Interestingly, we show that in the presence of absorption, a more intense thermal background can lead to target detection with enhanced efficiency. Moreover, we observe that the quantum advantage persists even for finite amounts of absorption. However, we find that the quantum advantage offered by TMSV decreases monotonically with absorption, and becomes vanishingly small in the high absorption regime. We also demonstrate the optimality of both the coherent and the TMSV states in their respective setups (idler-free and signal-idler) in the limit of low reflectivity and absorption.

arXiv:2111.01069•Nov 1, 2021•1 citation

Enhanced quantum illumination of a lossy target: A sequential interaction model

Shilpi Srivastava, Shubhrangshu Dasgupta

Quantum illumination (QI) exploits quantum correlations to detect weakly reflecting targets embedded in noisy environments with higher sensitivity than classical illumination (CI). We investigate the effectiveness of QI in a realistic setting in which the signal sequentially interacts with a noisy environment and a lossy target. The target is considered at a temperature distinct from its surroundings, while both the interactions are modeled as an action of independent beam splitters with different reflectivities. The detection performance is quantified using the signal-to-noise ratio (SNR) and the quantum Chernoff bound (QCB), the latter providing an upper bound on the error probability. The performance of the Gaussian two-mode squeezed state (TMSS) is compared with that of the optimal classical protocol based on coherent states (CS). The proposed model shows that TMSS consistently achieves a higher SNR than CS for a low-reflectivity target and an arbitrary phase change and remains robust against thermal noise. Furthermore, a sufficiently lower QCB is obtained for TMSS than in previously reported results, indicating greater distinguishability between the presence and absence of the target. These findings underscore the role of realistic modeling in improving QI-based detection of lossy targets, with potential relevance to quantum radar and lidar systems.

quant-pharXiv:2604.12381•Apr 15, 2026•0 citations

How discord underlies the noise resilience of quantum illumination

Christian Weedbrook, Stefano Pirandola, Jayne E. Thompson +2 more

The benefits of entanglement can outlast entanglement itself. In quantum illumination, entanglement is employed to better detect reflecting objects in environments so noisy that all entanglement is destroyed. Here, we show that quantum discord—a more resilient form of quantum correlations—explains the resilience of quantum illumination. We introduce a quantitative relation between the performance gain in quantum illumination and the amount of discord used to encode information about the presence or absence of a reflecting object. This highlights discords role preserving the benefits of entanglement in entanglement breaking noise.

arXiv:1312.3332•New Journal of Physics•Apr 18, 2016•105 citations

Quantum Illumination for Stealth Target Detection: A Discrete-Qubit Toy Model on PKTron and IBM Quantum Hardware

Zuhair Ahmed

Abstract Quantum illumination has been proposed as a theoretical route to detecting low-reflectivity targets, such as stealth aircraft, in high-background-noise environments where classical radar performance degrades. The protocol, as originally formulated (Lloyd, 2008; Tan et al., 2008), uses continuous-variable entangled light (two-mode squeezed vacuum) and a specific phase-sensitive joint receiver to achieve a theoretical detection advantage over classical illumination of matched energy, even though the entanglement itself does not survive the round trip through a lossy, noisy channel. This study investigates whether that advantage appears in a simpler, discrete-variable (qubit) toy model, of the kind commonly used for pedagogical intuition, implemented on PKTron and cross-checked on IBM Quantum hardware. A rigorously fair comparison was constructed in which an entangled Bell pair and a classically correlated (separable) mixture of matched initial correlation strength were each subjected to identical loss and background-noise channels, with detection performance assessed via the same joint correlation measurement (Z⊗Z expectation) in both cases. In PKTron simulation, the entangled probe showed a correlation separation between target-present and target-absent hypotheses of 0.0100 at zero background noise, decreasing to 0.0025 at high background noise, while the classically correlated probe showed a substantially larger separation, decreasing from 0.1000 to 0.0500 over the same range — indicating no entanglement advantage, and if anything, a disadvantage, in this discrete model. This qualitative finding was independently corroborated on IBM Quantum's ibm_kingston hardware, using natural qubit T1 relaxation (rather than an artificially injected noise parameter) as the loss channel: entangled correlation degraded to 54.5% of its initial value after 60 microseconds, compared to 77.7% retained by the classically correlated mixture over the same interval. These results indicate that the theoretical quantum illumination advantage does not straightforwardly emerge from a simple discrete-qubit correlation model, consistent with the broader understanding that the effect is specific to continuous-variable Gaussian states and phase-sensitive joint detection, and consistent with quantum illumination's status as a theoretical concept with no demonstrated range or signal-to-noise advantage over classical radar to date.

•Jan 1, 2026•0 citations
In the paper by Weedbrook et. al,1 a post-selected model of Lloyd's original formulation of quantum illumination (QI)2 was used to show that quantum discord explains the underlying advantage of QI over conventional illumination. The same model was used by Ray et. al3 to show that the normalized Hilbert-Schmidt inner product (HSIP) is a valid distinguishability measure when analyzing quantum illumination. This post-selected model assumes that the detector always detects a photon whether it be from the signal or noise from the environment; thus, the vacuum is excluded from this model. In this paper, we include the vacuum back into these analyses. In the case of,1 we show that the conclusion is unaffected by the inclusion of the vacuum. We then analyze the effects of including the vacuum when distinguishing between a noisy signal and noise. In this analysis, we found that the normalized HSIP is not monotonic with respect to the parameter that controls the brightness of the noise. Because of this, the normalized Hilbert-Schmidt inner product cannot be used as a distinguishability as was seen in the post-selected model. To reconcile this problem, we used the proposed alternative fidelity measure defined in,4 and found that it is monotonic in the vacuum added model for all the examples considered.
Quantum Illumination (QI)1 is a proposed remote targeting protocol using entangled states in which the experimenter sends a signal towards an expected target in a noisy environment that has a probability of reflecting off the surface or, in the case of no surface, being lost. Upon return, the noisy signal is jointly measured with the idler, which has been held in local memory, to determine if the surface has been detected. The idler effectively increases the brightness of the noisy signal to help distinguish it from the surrounding noise. Even though the returned mixed state is in the un-entangled regime, it has been shown that QI outperforms a conventional protocol that only sends separable states as the signal. We analyzed QI as a quantum channel discrimination protocol and circumvented computational issues that rely on diagonalization of the quantum states by using the normalized Hilbert-Schmidt (NH-S) inner product as a measure of state distinguishability.2 Because the NH-S inner product is simple to compute, for a choice of entangled pure state and bipartition, we were able to rank the performance of QI entirely in terms of the dimension of the composite Hilbert space and the purity of the idler subsystem. We also showed that the greatest advantage gained by quantum illumination over conventional illumination occurs when one uses a Bell state, and for a fixed dimension d, the optimal performance of QI is achieved when the purity of the idler subsystem is minimal. In this talk, we review the results of,2 and present our progress on extending this analysis to a broader class of quantum information protocols beyond QI.
Quantum illumination (QI) is an entanglement-based protocol for improving LiDAR/radar detection of unresolved targets beyond what a classical LiDAR/radar of the same average transmitted energy can do. Originally proposed by Seth Lloyd as a discrete-variable quantum LiDAR, it was soon shown that his proposal offered no quantum advantage over its best classical competitor. Continuous-variable, specifically Gaussian-state, QI has been shown to offer a true quantum advantage, both in theory and in table-top experiments. Moreover, despite its considerable drawbacks, the microwave version of Gaussian-state QI continues to attract research attention. A recent QI study by Armanpreet Pannu, Amr Helmy, and Hesham El Gamal (PHE), however, has: (i) combined the entangled state from Lloyd’s QI with the channel models from Gaussian-state QI; (ii) proposed a new positive operator-valued measurement for that composite setup; and (iii) claimed that, unlike Gaussian-state QI, PHE QI achieves the Nair–Gu lower bound on QI target-detection error probability at all noise brightnesses. PHE’s analysis was asymptotic, i.e., it presumed infinite-dimensional entanglement. The current paper works out the finite-dimensional performance of PHE QI. It shows that there is a threshold value for the entangled-state dimensionality below which there is no quantum advantage, and above which the Nair–Gu bound is approached asymptotically. Moreover, with both systems operating with error-probability exponents 1 dB lower than the Nair–Gu bound, PHE QI requires enormously higher entangled-state dimensionality than does Gaussian-state QI to achieve useful error probabilities in both high-brightness (100 photons/mode) and moderate-brightness (1 photon/mode) noise. Furthermore, neither system has an appreciable quantum advantage in low-brightness (much less than 1 photon/mode) noise.
In a quantum illumination (QI) protocol, the task is to detect the presence of the target which is typically modelled by a partially reflecting beam splitter. We analyze the performance of QI when the target absorbs part of the light that falls on it, thereby making the scenario more realistic. We present an optical setup that models a target with these characteristics and explore its detectability in the quantum domain in terms of the Chernoff bound (CB). For an idler-free setup, we use the coherent state for QI while the two mode squeezed vacuum (TMSV) state is employed in the signal-idler scheme. In both the cases, we report an absorption-induced enhancement of the detection efficiency indicated by a lowering of CB with increasing amounts of absorption. Interestingly, we show that in the presence of absorption, a more intense thermal background can lead to target detection with enhanced efficiency. Moreover, we observe that the quantum advantage persists even for finite amounts of absorption. However, we find that the quantum advantage offered by TMSV decreases monotonically with absorption, and becomes vanishingly small in the high absorption regime. We also demonstrate the optimality of both the coherent and the TMSV states in their respective setups (idler-free and signal-idler) in the limit of low reflectivity and absorption.
Quantum illumination (QI) exploits quantum correlations to detect weakly reflecting targets embedded in noisy environments with higher sensitivity than classical illumination (CI). We investigate the effectiveness of QI in a realistic setting in which the signal sequentially interacts with a noisy environment and a lossy target. The target is considered at a temperature distinct from its surroundings, while both the interactions are modeled as an action of independent beam splitters with different reflectivities. The detection performance is quantified using the signal-to-noise ratio (SNR) and the quantum Chernoff bound (QCB), the latter providing an upper bound on the error probability. The performance of the Gaussian two-mode squeezed state (TMSS) is compared with that of the optimal classical protocol based on coherent states (CS). The proposed model shows that TMSS consistently achieves a higher SNR than CS for a low-reflectivity target and an arbitrary phase change and remains robust against thermal noise. Furthermore, a sufficiently lower QCB is obtained for TMSS than in previously reported results, indicating greater distinguishability between the presence and absence of the target. These findings underscore the role of realistic modeling in improving QI-based detection of lossy targets, with potential relevance to quantum radar and lidar systems.
The benefits of entanglement can outlast entanglement itself. In quantum illumination, entanglement is employed to better detect reflecting objects in environments so noisy that all entanglement is destroyed. Here, we show that quantum discord—a more resilient form of quantum correlations—explains the resilience of quantum illumination. We introduce a quantitative relation between the performance gain in quantum illumination and the amount of discord used to encode information about the presence or absence of a reflecting object. This highlights discords role preserving the benefits of entanglement in entanglement breaking noise.
Abstract Quantum illumination has been proposed as a theoretical route to detecting low-reflectivity targets, such as stealth aircraft, in high-background-noise environments where classical radar performance degrades. The protocol, as originally formulated (Lloyd, 2008; Tan et al., 2008), uses continuous-variable entangled light (two-mode squeezed vacuum) and a specific phase-sensitive joint receiver to achieve a theoretical detection advantage over classical illumination of matched energy, even though the entanglement itself does not survive the round trip through a lossy, noisy channel. This study investigates whether that advantage appears in a simpler, discrete-variable (qubit) toy model, of the kind commonly used for pedagogical intuition, implemented on PKTron and cross-checked on IBM Quantum hardware. A rigorously fair comparison was constructed in which an entangled Bell pair and a classically correlated (separable) mixture of matched initial correlation strength were each subjected to identical loss and background-noise channels, with detection performance assessed via the same joint correlation measurement (Z⊗Z expectation) in both cases. In PKTron simulation, the entangled probe showed a correlation separation between target-present and target-absent hypotheses of 0.0100 at zero background noise, decreasing to 0.0025 at high background noise, while the classically correlated probe showed a substantially larger separation, decreasing from 0.1000 to 0.0500 over the same range — indicating no entanglement advantage, and if anything, a disadvantage, in this discrete model. This qualitative finding was independently corroborated on IBM Quantum's ibm_kingston hardware, using natural qubit T1 relaxation (rather than an artificially injected noise parameter) as the loss channel: entangled correlation degraded to 54.5% of its initial value after 60 microseconds, compared to 77.7% retained by the classically correlated mixture over the same interval. These results indicate that the theoretical quantum illumination advantage does not straightforwardly emerge from a simple discrete-qubit correlation model, consistent with the broader understanding that the effect is specific to continuous-variable Gaussian states and phase-sensitive joint detection, and consistent with quantum illumination's status as a theoretical concept with no demonstrated range or signal-to-noise advantage over classical radar to date.