Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

The Hilbert Schmidt inner product, quantum illumination, and beyond

Shannon M. Ray, Paul M. Alsing

Published Sep 19, 2019• 1 citation
Publisher

Abstract

Quantum Illumination (QI)1 is a proposed remote targeting protocol using entangled states in which the experimenter sends a signal towards an expected target in a noisy environment that has a probability of reflecting off the surface or, in the case of no surface, being lost. Upon return, the noisy signal is jointly measured with the idler, which has been held in local memory, to determine if the surface has been detected. The idler effectively increases the brightness of the noisy signal to help distinguish it from the surrounding noise. Even though the returned mixed state is in the un-entangled regime, it has been shown that QI outperforms a conventional protocol that only sends separable states as the signal. We analyzed QI as a quantum channel discrimination protocol and circumvented computational issues that rely on diagonalization of the quantum states by using the normalized Hilbert-Schmidt (NH-S) inner product as a measure of state distinguishability.2 Because the NH-S inner product is simple to compute, for a choice of entangled pure state and bipartition, we were able to rank the performance of QI entirely in terms of the dimension of the composite Hilbert space and the purity of the idler subsystem. We also showed that the greatest advantage gained by quantum illumination over conventional illumination occurs when one uses a Bell state, and for a fixed dimension d, the optimal performance of QI is achieved when the purity of the idler subsystem is minimal. In this talk, we review the results of,2 and present our progress on extending this analysis to a broader class of quantum information protocols beyond QI.

DOI
10.1117/12.2532967

Related papers

Fundamental limits of quantum illumination

Ranjith Nair, Mile Gu

In quantum illumination (QI), a signal beam initially entangled with an idler beam held at the receiver interrogates a target region bathed in thermal background light. The returned beam is measured jointly with the idler in order to determine whether a weakly reflecting target is present. Using tools from quantum information theory, we derive lower bounds on the average error probability of detecting both specular and fading targets and on the mean squared error of estimating the reflectance of a detected target, which are obeyed by any QI transmitter satisfying a signal energy constraint. For bright thermal backgrounds, we show that the QI system using multiple copies of low-brightness two-mode squeezed vacuum states is nearly optimal. More generally, our results place limits on the best possible performance achievable using QI systems at all wavelengths, and at all signal and background noise levels.

arXiv:2002.12252•Optica•Jun 11, 2020•85 citations

Including the vacuum in the post-selected model of quantum illumination

Shannon M. Ray, Paul M. Alsing

In the paper by Weedbrook et. al,1 a post-selected model of Lloyd's original formulation of quantum illumination (QI)2 was used to show that quantum discord explains the underlying advantage of QI over conventional illumination. The same model was used by Ray et. al3 to show that the normalized Hilbert-Schmidt inner product (HSIP) is a valid distinguishability measure when analyzing quantum illumination. This post-selected model assumes that the detector always detects a photon whether it be from the signal or noise from the environment; thus, the vacuum is excluded from this model. In this paper, we include the vacuum back into these analyses. In the case of,1 we show that the conclusion is unaffected by the inclusion of the vacuum. We then analyze the effects of including the vacuum when distinguishing between a noisy signal and noise. In this analysis, we found that the normalized HSIP is not monotonic with respect to the parameter that controls the brightness of the noise. Because of this, the normalized Hilbert-Schmidt inner product cannot be used as a distinguishability as was seen in the post-selected model. To reconcile this problem, we used the proposed alternative fidelity measure defined in,4 and found that it is monotonic in the vacuum added model for all the examples considered.

Emerging Imaging and Sensing Technologies for Security and Defence; and Advanced Manufacturing Technologies for Micro- and Nanosystems in Security and Defence•Sep 18, 2020•0 citations

Quantum illumination for enhanced detection of Rayleigh-fading targets

Quntao Zhuang, Zheshen Zhang, Jeffrey H. Shapiro

Quantum illumination (QI) is an entanglement-enhanced sensing system whose performance advantage over a comparable classical system survives its usage in an entanglement-breaking scenario plagued by loss and noise. In particular, QI's error-probability exponent for discriminating between equally likely hypotheses of target absence or presence is 6 dB higher than that of the optimum classical system using the same transmitted power. This performance advantage, however, presumes that the target return, when present, has known amplitude and phase, a situation that seldom occurs in light detection and ranging (lidar) applications. At lidar wavelengths, most target surfaces are sufficiently rough that their returns are speckled, i.e., they have Rayleigh-distributed amplitudes and uniformly distributed phases. QI's optical parametric amplifier receiver---which affords a 3 dB better-than-classical error-probability exponent for a return with known amplitude and phase---fails to offer any performance gain for Rayleigh-fading targets. We show that the sum-frequency generation receiver [Zhuang et al., Phys. Rev. Lett. 118, 040801 (2017)]---whose error-probability exponent for a nonfading target achieves QI's full 6 dB advantage over optimum classical operation---outperforms the classical system for Rayleigh-fading targets. In this case, QI's advantage is subexponential: its error probability is lower than the classical system's by a factor of $1/ln(M\overline{\ensuremath{\kappa}}{N}_{S}/{N}_{B})$, when $M\overline{\ensuremath{\kappa}}{N}_{S}/{N}_{B}\ensuremath{\gg}1$, with $M\ensuremath{\gg}1$ being the QI transmitter's time-bandwidth product, ${N}_{S}\ensuremath{\ll}1$ its brightness, $\overline{\ensuremath{\kappa}}$ the target return's average intensity, and ${N}_{B}$ the background light's brightness.

arXiv:1706.05561•Physical Review A•Aug 15, 2017•52 citations

Quantum Illumination Advantage for Classification Among an Arbitrary Library of Targets

Ali Cox, Quntao Zhuang, Jeffrey H. Shapiro +1 more

Quantum illumination (QI) is the task of querying a scene using a transmitter probe whose quantum state is entangled with a reference beam retained in ideal storage, followed by optimally detecting the target-returned light together with the stored reference, to make decisions on characteristics of targets at stand-off range, at precision that exceeds what is achievable with a classical transmitter of the same brightness and otherwise identical conditions. Using tools from perturbation theory, we show that in the limit of low transmitter brightness, high loss, and high thermal background, there is a factor of four improvement in the Chernoff exponent of the error probability in discriminating any number of apriori-known reflective targets when using a Gaussian-state entangled QI probe, over using classical coherent-state illumination (CI). While this advantage was known for detecting the presence or absence of a target, it had not been proven for the generalized task of discriminating between arbitrary target libraries. In proving our result, we derive simple general analytic expressions for the lowest-order asymptotic expansions of the quantum Chernoff exponents for QI and CI in terms of the signal brightness, loss, thermal noise, and the modal expansion coefficients of the target-reflected light's radiant exitance profiles when separated by a spatial mode sorter after entering the entrance pupil of the receiver's aperture.

arXiv:2408.13489•IEEE International Symposium on Information Theory (ISIT)•Jul 7, 2024•3 citations

Enhanced quantum illumination of a lossy target: A sequential interaction model

Shilpi Srivastava, Shubhrangshu Dasgupta

Quantum illumination (QI) exploits quantum correlations to detect weakly reflecting targets embedded in noisy environments with higher sensitivity than classical illumination (CI). We investigate the effectiveness of QI in a realistic setting in which the signal sequentially interacts with a noisy environment and a lossy target. The target is considered at a temperature distinct from its surroundings, while both the interactions are modeled as an action of independent beam splitters with different reflectivities. The detection performance is quantified using the signal-to-noise ratio (SNR) and the quantum Chernoff bound (QCB), the latter providing an upper bound on the error probability. The performance of the Gaussian two-mode squeezed state (TMSS) is compared with that of the optimal classical protocol based on coherent states (CS). The proposed model shows that TMSS consistently achieves a higher SNR than CS for a low-reflectivity target and an arbitrary phase change and remains robust against thermal noise. Furthermore, a sufficiently lower QCB is obtained for TMSS than in previously reported results, indicating greater distinguishability between the presence and absence of the target. These findings underscore the role of realistic modeling in improving QI-based detection of lossy targets, with potential relevance to quantum radar and lidar systems.

quant-pharXiv:2604.12381•Apr 15, 2026•0 citations

Noise Types in Correlation-Based Target Detection

Vladimir V. Kornienko, Ilkka Juhani Tittonen

Quantum illumination (QI) [1] is a general name for a class of target detection protocols, where an entangled state is used to illuminate a region of space where a reflecting target may be present. Storing part of the state and sending the other part to the target, QI can suppress the sources of uncorrelated noise by using the correlations in frequency, phase, and arrival time between the stored state and the target return state [2], [3]. This alleviates the task of detecting a weakly reflecting target against a strong background [4]. After initial proposal based on the entangled photon pairs, QI has been extended [5] to the case of Gaussian states, which are easier to prepare and manipulate.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 26, 2023•0 citations
Quantum Illumination (QI)1 is a proposed remote targeting protocol using entangled states in which the experimenter sends a signal towards an expected target in a noisy environment that has a probability of reflecting off the surface or, in the case of no surface, being lost. Upon return, the noisy signal is jointly measured with the idler, which has been held in local memory, to determine if the surface has been detected. The idler effectively increases the brightness of the noisy signal to help distinguish it from the surrounding noise. Even though the returned mixed state is in the un-entangled regime, it has been shown that QI outperforms a conventional protocol that only sends separable states as the signal. We analyzed QI as a quantum channel discrimination protocol and circumvented computational issues that rely on diagonalization of the quantum states by using the normalized Hilbert-Schmidt (NH-S) inner product as a measure of state distinguishability.2 Because the NH-S inner product is simple to compute, for a choice of entangled pure state and bipartition, we were able to rank the performance of QI entirely in terms of the dimension of the composite Hilbert space and the purity of the idler subsystem. We also showed that the greatest advantage gained by quantum illumination over conventional illumination occurs when one uses a Bell state, and for a fixed dimension d, the optimal performance of QI is achieved when the purity of the idler subsystem is minimal. In this talk, we review the results of,2 and present our progress on extending this analysis to a broader class of quantum information protocols beyond QI.
In quantum illumination (QI), a signal beam initially entangled with an idler beam held at the receiver interrogates a target region bathed in thermal background light. The returned beam is measured jointly with the idler in order to determine whether a weakly reflecting target is present. Using tools from quantum information theory, we derive lower bounds on the average error probability of detecting both specular and fading targets and on the mean squared error of estimating the reflectance of a detected target, which are obeyed by any QI transmitter satisfying a signal energy constraint. For bright thermal backgrounds, we show that the QI system using multiple copies of low-brightness two-mode squeezed vacuum states is nearly optimal. More generally, our results place limits on the best possible performance achievable using QI systems at all wavelengths, and at all signal and background noise levels.
In the paper by Weedbrook et. al,1 a post-selected model of Lloyd's original formulation of quantum illumination (QI)2 was used to show that quantum discord explains the underlying advantage of QI over conventional illumination. The same model was used by Ray et. al3 to show that the normalized Hilbert-Schmidt inner product (HSIP) is a valid distinguishability measure when analyzing quantum illumination. This post-selected model assumes that the detector always detects a photon whether it be from the signal or noise from the environment; thus, the vacuum is excluded from this model. In this paper, we include the vacuum back into these analyses. In the case of,1 we show that the conclusion is unaffected by the inclusion of the vacuum. We then analyze the effects of including the vacuum when distinguishing between a noisy signal and noise. In this analysis, we found that the normalized HSIP is not monotonic with respect to the parameter that controls the brightness of the noise. Because of this, the normalized Hilbert-Schmidt inner product cannot be used as a distinguishability as was seen in the post-selected model. To reconcile this problem, we used the proposed alternative fidelity measure defined in,4 and found that it is monotonic in the vacuum added model for all the examples considered.
Quantum illumination (QI) is an entanglement-enhanced sensing system whose performance advantage over a comparable classical system survives its usage in an entanglement-breaking scenario plagued by loss and noise. In particular, QI's error-probability exponent for discriminating between equally likely hypotheses of target absence or presence is 6 dB higher than that of the optimum classical system using the same transmitted power. This performance advantage, however, presumes that the target return, when present, has known amplitude and phase, a situation that seldom occurs in light detection and ranging (lidar) applications. At lidar wavelengths, most target surfaces are sufficiently rough that their returns are speckled, i.e., they have Rayleigh-distributed amplitudes and uniformly distributed phases. QI's optical parametric amplifier receiver---which affords a 3 dB better-than-classical error-probability exponent for a return with known amplitude and phase---fails to offer any performance gain for Rayleigh-fading targets. We show that the sum-frequency generation receiver [Zhuang et al., Phys. Rev. Lett. 118, 040801 (2017)]---whose error-probability exponent for a nonfading target achieves QI's full 6 dB advantage over optimum classical operation---outperforms the classical system for Rayleigh-fading targets. In this case, QI's advantage is subexponential: its error probability is lower than the classical system's by a factor of $1/ln(M\overline{\ensuremath{\kappa}}{N}_{S}/{N}_{B})$, when $M\overline{\ensuremath{\kappa}}{N}_{S}/{N}_{B}\ensuremath{\gg}1$, with $M\ensuremath{\gg}1$ being the QI transmitter's time-bandwidth product, ${N}_{S}\ensuremath{\ll}1$ its brightness, $\overline{\ensuremath{\kappa}}$ the target return's average intensity, and NB{N}_{B}NB​ the background light's brightness.
Quantum illumination (QI) is the task of querying a scene using a transmitter probe whose quantum state is entangled with a reference beam retained in ideal storage, followed by optimally detecting the target-returned light together with the stored reference, to make decisions on characteristics of targets at stand-off range, at precision that exceeds what is achievable with a classical transmitter of the same brightness and otherwise identical conditions. Using tools from perturbation theory, we show that in the limit of low transmitter brightness, high loss, and high thermal background, there is a factor of four improvement in the Chernoff exponent of the error probability in discriminating any number of apriori-known reflective targets when using a Gaussian-state entangled QI probe, over using classical coherent-state illumination (CI). While this advantage was known for detecting the presence or absence of a target, it had not been proven for the generalized task of discriminating between arbitrary target libraries. In proving our result, we derive simple general analytic expressions for the lowest-order asymptotic expansions of the quantum Chernoff exponents for QI and CI in terms of the signal brightness, loss, thermal noise, and the modal expansion coefficients of the target-reflected light's radiant exitance profiles when separated by a spatial mode sorter after entering the entrance pupil of the receiver's aperture.
Quantum illumination (QI) exploits quantum correlations to detect weakly reflecting targets embedded in noisy environments with higher sensitivity than classical illumination (CI). We investigate the effectiveness of QI in a realistic setting in which the signal sequentially interacts with a noisy environment and a lossy target. The target is considered at a temperature distinct from its surroundings, while both the interactions are modeled as an action of independent beam splitters with different reflectivities. The detection performance is quantified using the signal-to-noise ratio (SNR) and the quantum Chernoff bound (QCB), the latter providing an upper bound on the error probability. The performance of the Gaussian two-mode squeezed state (TMSS) is compared with that of the optimal classical protocol based on coherent states (CS). The proposed model shows that TMSS consistently achieves a higher SNR than CS for a low-reflectivity target and an arbitrary phase change and remains robust against thermal noise. Furthermore, a sufficiently lower QCB is obtained for TMSS than in previously reported results, indicating greater distinguishability between the presence and absence of the target. These findings underscore the role of realistic modeling in improving QI-based detection of lossy targets, with potential relevance to quantum radar and lidar systems.
Quantum illumination (QI) [1] is a general name for a class of target detection protocols, where an entangled state is used to illuminate a region of space where a reflecting target may be present. Storing part of the state and sending the other part to the target, QI can suppress the sources of uncorrelated noise by using the correlations in frequency, phase, and arrival time between the stored state and the target return state [2], [3]. This alleviates the task of detecting a weakly reflecting target against a strong background [4]. After initial proposal based on the entangled photon pairs, QI has been extended [5] to the case of Gaussian states, which are easier to prepare and manipulate.