Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2111.01069

Quantum illumination with a light absorbing target

Rivu Gupta, Saptarshi Roy, Tamoghna Das, Aditi Sen De

Published Nov 1, 2021• 0 citations
arXivHTMLPDF

Abstract

In a quantum illumination (QI) protocol, the task is to detect the presence of the target which is typically modelled by a partially reflecting beam splitter. We analyze the performance of QI when the target absorbs part of the light that falls on it, thereby making the scenario more realistic. We present an optical setup that models a target with these characteristics and explore its detectability in the quantum domain in terms of the Chernoff bound (CB). For an idler-free setup, we use the coherent state for QI while the two mode squeezed vacuum (TMSV) state is employed in the signal-idler scheme. In both the cases, we report an absorption-induced enhancement of the detection efficiency indicated by a lowering of CB with increasing amounts of absorption. Interestingly, we show that in the presence of absorption, a more intense thermal background can lead to target detection with enhanced efficiency. Moreover, we observe that the quantum advantage persists even for finite amounts of absorption. However, we find that the quantum advantage offered by TMSV decreases monotonically with absorption, and becomes vanishingly small in the high absorption regime. We also demonstrate the optimality of both the coherent and the TMSV states in their respective setups (idler-free and signal-idler) in the limit of low reflectivity and absorption.

DOI
10.48550/arxiv.2111.01069

Related papers

Fundamental limits of quantum illumination

Ranjith Nair, Mile Gu

In quantum illumination (QI), a signal beam initially entangled with an idler beam held at the receiver interrogates a target region bathed in thermal background light. The returned beam is measured jointly with the idler in order to determine whether a weakly reflecting target is present. Using tools from quantum information theory, we derive lower bounds on the average error probability of detecting both specular and fading targets and on the mean squared error of estimating the reflectance of a detected target, which are obeyed by any QI transmitter satisfying a signal energy constraint. For bright thermal backgrounds, we show that the QI system using multiple copies of low-brightness two-mode squeezed vacuum states is nearly optimal. More generally, our results place limits on the best possible performance achievable using QI systems at all wavelengths, and at all signal and background noise levels.

arXiv:2002.12252•Optica•Jun 11, 2020•84 citations

Enhanced quantum illumination of a lossy target: A sequential interaction model

Shilpi Srivastava, Shubhrangshu Dasgupta

Quantum illumination (QI) exploits quantum correlations to detect weakly reflecting targets embedded in noisy environments with higher sensitivity than classical illumination (CI). We investigate the effectiveness of QI in a realistic setting in which the signal sequentially interacts with a noisy environment and a lossy target. The target is considered at a temperature distinct from its surroundings, while both the interactions are modeled as an action of independent beam splitters with different reflectivities. The detection performance is quantified using the signal-to-noise ratio (SNR) and the quantum Chernoff bound (QCB), the latter providing an upper bound on the error probability. The performance of the Gaussian two-mode squeezed state (TMSS) is compared with that of the optimal classical protocol based on coherent states (CS). The proposed model shows that TMSS consistently achieves a higher SNR than CS for a low-reflectivity target and an arbitrary phase change and remains robust against thermal noise. Furthermore, a sufficiently lower QCB is obtained for TMSS than in previously reported results, indicating greater distinguishability between the presence and absence of the target. These findings underscore the role of realistic modeling in improving QI-based detection of lossy targets, with potential relevance to quantum radar and lidar systems.

quant-pharXiv:2604.12381•Apr 15, 2026•0 citations

Quantum Illumination Advantage for Classification Among an Arbitrary Library of Targets

Ali Cox, Quntao Zhuang, Jeffrey H. Shapiro +1 more

Quantum illumination (QI) is the task of querying a scene using a transmitter probe whose quantum state is entangled with a reference beam retained in ideal storage, followed by optimally detecting the target-returned light together with the stored reference, to make decisions on characteristics of targets at stand-off range, at precision that exceeds what is achievable with a classical transmitter of the same brightness and otherwise identical conditions. Using tools from perturbation theory, we show that in the limit of low transmitter brightness, high loss, and high thermal background, there is a factor of four improvement in the Chernoff exponent of the error probability in discriminating any number of apriori-known reflective targets when using a Gaussian-state entangled QI probe, over using classical coherent-state illumination (CI). While this advantage was known for detecting the presence or absence of a target, it had not been proven for the generalized task of discriminating between arbitrary target libraries. In proving our result, we derive simple general analytic expressions for the lowest-order asymptotic expansions of the quantum Chernoff exponents for QI and CI in terms of the signal brightness, loss, thermal noise, and the modal expansion coefficients of the target-reflected light's radiant exitance profiles when separated by a spatial mode sorter after entering the entrance pupil of the receiver's aperture.

arXiv:2408.13489•IEEE International Symposium on Information Theory (ISIT)•Jul 7, 2024•2 citations

Quantum illumination using non-Gaussian states with conditional measurements

Huan Zhang, Ying Xia, Wei Ye +2 more

Quantum illumination is a quantum sensing protocol primarily used for object detection, which aims to detect the presence of a target with low reflectivity in the free space using quantum light fields. Here we investigate a quantum illumination scheme using an entangled light source by performing non-Gaussian operations on the two-mode squeezed vacuum (TMSV) state in order to reduce the detection error probability and meanwhile improve the signal-to-noise (SNR) ratio. We demonstrate that under the same squeezing parameter, the non-Gaussian operations can significantly reduce the detection error rate compared with the original TMSV state. Under the same average signal photon number, both the TMSV states with and without non-Gaussian operations can provide smaller error rate than that of the coherent state. In addition, we consider the balanced homodyne detection on idler and return signal photons as joint measurement and find that non-Gaussian operations can enhance the SNR of target detection by about 6--9 dB compared with that using TMSV. These results here demonstrate the advantage of the non-Gaussian entangled source in quantum illumination protocol and can find potential applications in target detection in noisy environment.

Physical Review A•Jun 28, 2024•12 citations

Simple Detection Scheme and Performance Evaluation for Quantum Illumination Using Quasi-Bell State

Tiancheng Wang, Tsuyoshi Sasaki Usuda

Quantum illumination has been a hot topic in quantum sensing since first proposed by S. Lloyd in 2008. Quantum illumination is an entanglement-based protocol that is able to detect the existence of a target in an environment with low-energy transmissivity and strong thermal noise. The Bell state and the two-mode squeezed vacuum (TMSV) state as an entangled light source have been widely discussed. In our previous study, we clarified that quantum illumination using the quasi-Bell state offers good performance at error probability even though easing the above-mentioned restrictions on the environment. In this study, we considered and discussed a physical implementation of a measurement scheme for the quasi-Bell state-based quantum illumination using a beam splitter and photon counters. As the result, although the measurement scheme is not an optimum scheme, it still offers a clear advantage over that using the TMSV state, which allows optimum quantum detection, under almost situations.

IEEJ Transactions on Electronics Information and Systems•Nov 30, 2023•1 citation

Partially reflecting jamming objects in correlation-enhanced target detection with entangled photons

Vladimir V. Kornienko, Cynthia Vidal, Arttu Pönni +2 more

In the optical detection of distant objects, one can benefit from quantum light properties over those of classical light. Two-beam correlation-enhanced protocols can improve imaging or target detection even under strong background noise and in the low photon flux regime. We demonstrate that a partially reflecting jamming object introduces noise to these protocols, including quantum illumination. In contrast to background noise, the signal radiation reflected from the jammer is correlated with the corresponding idler beam. We analyze the means to mitigate this noise and introduce an indistinguishability parameter μ, showing how efficiently the jammer can be distinguished from the target. We use the quantum Chernoff bound and the density matrix orthogonalization procedure to separate the contributions from the target, the background, and the jammer. We illustrate our findings with an experiment using optical entangled photon pairs at 800 nm. Our results can be applied to the design of target detection protocols and advanced imaging techniques.

APL Quantum•Feb 23, 2024•1 citation
In a quantum illumination (QI) protocol, the task is to detect the presence of the target which is typically modelled by a partially reflecting beam splitter. We analyze the performance of QI when the target absorbs part of the light that falls on it, thereby making the scenario more realistic. We present an optical setup that models a target with these characteristics and explore its detectability in the quantum domain in terms of the Chernoff bound (CB). For an idler-free setup, we use the coherent state for QI while the two mode squeezed vacuum (TMSV) state is employed in the signal-idler scheme. In both the cases, we report an absorption-induced enhancement of the detection efficiency indicated by a lowering of CB with increasing amounts of absorption. Interestingly, we show that in the presence of absorption, a more intense thermal background can lead to target detection with enhanced efficiency. Moreover, we observe that the quantum advantage persists even for finite amounts of absorption. However, we find that the quantum advantage offered by TMSV decreases monotonically with absorption, and becomes vanishingly small in the high absorption regime. We also demonstrate the optimality of both the coherent and the TMSV states in their respective setups (idler-free and signal-idler) in the limit of low reflectivity and absorption.
In quantum illumination (QI), a signal beam initially entangled with an idler beam held at the receiver interrogates a target region bathed in thermal background light. The returned beam is measured jointly with the idler in order to determine whether a weakly reflecting target is present. Using tools from quantum information theory, we derive lower bounds on the average error probability of detecting both specular and fading targets and on the mean squared error of estimating the reflectance of a detected target, which are obeyed by any QI transmitter satisfying a signal energy constraint. For bright thermal backgrounds, we show that the QI system using multiple copies of low-brightness two-mode squeezed vacuum states is nearly optimal. More generally, our results place limits on the best possible performance achievable using QI systems at all wavelengths, and at all signal and background noise levels.
Quantum illumination (QI) exploits quantum correlations to detect weakly reflecting targets embedded in noisy environments with higher sensitivity than classical illumination (CI). We investigate the effectiveness of QI in a realistic setting in which the signal sequentially interacts with a noisy environment and a lossy target. The target is considered at a temperature distinct from its surroundings, while both the interactions are modeled as an action of independent beam splitters with different reflectivities. The detection performance is quantified using the signal-to-noise ratio (SNR) and the quantum Chernoff bound (QCB), the latter providing an upper bound on the error probability. The performance of the Gaussian two-mode squeezed state (TMSS) is compared with that of the optimal classical protocol based on coherent states (CS). The proposed model shows that TMSS consistently achieves a higher SNR than CS for a low-reflectivity target and an arbitrary phase change and remains robust against thermal noise. Furthermore, a sufficiently lower QCB is obtained for TMSS than in previously reported results, indicating greater distinguishability between the presence and absence of the target. These findings underscore the role of realistic modeling in improving QI-based detection of lossy targets, with potential relevance to quantum radar and lidar systems.
Quantum illumination (QI) is the task of querying a scene using a transmitter probe whose quantum state is entangled with a reference beam retained in ideal storage, followed by optimally detecting the target-returned light together with the stored reference, to make decisions on characteristics of targets at stand-off range, at precision that exceeds what is achievable with a classical transmitter of the same brightness and otherwise identical conditions. Using tools from perturbation theory, we show that in the limit of low transmitter brightness, high loss, and high thermal background, there is a factor of four improvement in the Chernoff exponent of the error probability in discriminating any number of apriori-known reflective targets when using a Gaussian-state entangled QI probe, over using classical coherent-state illumination (CI). While this advantage was known for detecting the presence or absence of a target, it had not been proven for the generalized task of discriminating between arbitrary target libraries. In proving our result, we derive simple general analytic expressions for the lowest-order asymptotic expansions of the quantum Chernoff exponents for QI and CI in terms of the signal brightness, loss, thermal noise, and the modal expansion coefficients of the target-reflected light's radiant exitance profiles when separated by a spatial mode sorter after entering the entrance pupil of the receiver's aperture.
Quantum illumination is a quantum sensing protocol primarily used for object detection, which aims to detect the presence of a target with low reflectivity in the free space using quantum light fields. Here we investigate a quantum illumination scheme using an entangled light source by performing non-Gaussian operations on the two-mode squeezed vacuum (TMSV) state in order to reduce the detection error probability and meanwhile improve the signal-to-noise (SNR) ratio. We demonstrate that under the same squeezing parameter, the non-Gaussian operations can significantly reduce the detection error rate compared with the original TMSV state. Under the same average signal photon number, both the TMSV states with and without non-Gaussian operations can provide smaller error rate than that of the coherent state. In addition, we consider the balanced homodyne detection on idler and return signal photons as joint measurement and find that non-Gaussian operations can enhance the SNR of target detection by about 6--9 dB compared with that using TMSV. These results here demonstrate the advantage of the non-Gaussian entangled source in quantum illumination protocol and can find potential applications in target detection in noisy environment.
Quantum illumination has been a hot topic in quantum sensing since first proposed by S. Lloyd in 2008. Quantum illumination is an entanglement-based protocol that is able to detect the existence of a target in an environment with low-energy transmissivity and strong thermal noise. The Bell state and the two-mode squeezed vacuum (TMSV) state as an entangled light source have been widely discussed. In our previous study, we clarified that quantum illumination using the quasi-Bell state offers good performance at error probability even though easing the above-mentioned restrictions on the environment. In this study, we considered and discussed a physical implementation of a measurement scheme for the quasi-Bell state-based quantum illumination using a beam splitter and photon counters. As the result, although the measurement scheme is not an optimum scheme, it still offers a clear advantage over that using the TMSV state, which allows optimum quantum detection, under almost situations.
In the optical detection of distant objects, one can benefit from quantum light properties over those of classical light. Two-beam correlation-enhanced protocols can improve imaging or target detection even under strong background noise and in the low photon flux regime. We demonstrate that a partially reflecting jamming object introduces noise to these protocols, including quantum illumination. In contrast to background noise, the signal radiation reflected from the jammer is correlated with the corresponding idler beam. We analyze the means to mitigate this noise and introduce an indistinguishability parameter μ, showing how efficiently the jammer can be distinguished from the target. We use the quantum Chernoff bound and the density matrix orthogonalization procedure to separate the contributions from the target, the background, and the jammer. We illustrate our findings with an experiment using optical entangled photon pairs at 800 nm. Our results can be applied to the design of target detection protocols and advanced imaging techniques.