Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Fast RSFQ and ERSFQ Parallel Counters

M. Celik, Timur V. Filippov, Anubhav Sahu, Dmitri E. Kirichenko, Saad M. Sarwana, A. Erik Lehmann, Deepnarayan Gupta

Published Jul 21, 2020• 6 citations
Publisher

Abstract

Historically one of the most challenging high-speed rapid single flux quantum circuits to implement has been a parallel counter that sums a set of unweighted inputs and produces a binary-weighted word at the same clock rate. A 7-to-3 parallel counter that sums seven inputs has been designed and tested at the target clock frequency of 40 GHz and at frequencies up to 50 GHz using its own dedicated testbed. Yielded in both 10- and 20-kA/cm2 current densities using MIT Lincoln Laboratory's foundry, this 7-to-3 summing circuit has become a digital circuit benchmark. Most recently, a version with 15 parallel inputs producing a 4-bit output at the same target frequency was designed by combining 2 variants of 8-to-4 parallel counters. The first variant based on the 7-to-3 parallel counter, sums eight unweighted inputs, whereas the second variant sums two 4-bit binary-weighted words by pairwise summing of bits of equal weights. Design considerations for scaling this circuit will be discussed together with the circuit performance and yield.

DOI
10.1109/tasc.2020.3010692

Related papers

Fast RSFQ and ERSFQ Parallel Counters

M. Celik, Timur V. Filippov, Anubhav Sahu +4 more

Historically one of the most challenging high-speed RSFQ circuits to implement has been a parallel counter that sums a set of unweighted inputs and produces a binary-weighted word at the same clock rate. A 7-to-3 parallel counter that sums 7 inputs has been designed and tested at clock frequencies up to 50 GHz using its own dedicated testbed. Yielded in both 10- and 20-kA/cm2 current densities using MIT Lincoln Laboratory's foundry, this 7-to-3 summing circuit has become a digital circuit benchmark. Most recently, a version with 15 parallel inputs producing a 4-bit output was designed using two flavors of 8-to-4 summing circuits. The first (8-to-4a), based on the 7-to-3 parallel counter, sums 8 unweighted inputs whereas the second (8-to-4b) sums two 4-bit binary-weighted words by pairwise summing of bits of equal weights from two 8-to-4a blocks. Design considerations for scaling this circuit will be discussed together with the circuit performance and yield.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2019•2 citations

ERSFQ 8-Bit Parallel Adders as a Process Benchmark

Alex F. Kirichenko, I. V. Vernik, John A. Vivalda +2 more

We have designed and demonstrated two versions of an ERSFQ 8-bit parallel adder. ERSFQ is a resistor-free approach to dc biasing of Single Flux Quantum circuits that dissipates orders of magnitude less power than a traditional RSFQ logic while operating and has zero dissipation in inactive mode. The adders were designed for and fabricated with various fabrication processes, including HYPRES's 1.0-μm 4-layer 4.5 kA/cm2process, HYPRES's 0.25-μm 4-layer 4.5 kA/cm2process, HYPRES's 0.25-μm 6-layer 4.5 kA/cm2planarized process, and MIT Lincoln Lab's 0.25-μm 4-layer 10 kA/cm2process. These circuits serve as a good LSI fabrication process benchmark. We describe design and report on test results of all versions of the adder.

IEEE Transactions on Applied Superconductivity•Nov 20, 2014•37 citations

A rapid single flux quantum 1 bit arithmetic logic unit constructed with a half-adder cell

Ku-Rak Jung, J Y Kim, J.H. Kang +3 more

We have designed, fabricated, and tested a rapid single flux quantum (RSFQ) 1 bit arithmetic logic unit (ALU) block. The circuit consists of three DC current driven SFQ switches and a half-adder. We successfully tested the half-adder cell at clock frequency up to 20 GHz. The switches were commutating output ports of the half-adder to produce AND, OR, XOR, or ADD functions. For a high-speed test, we attached two switches at the input ports of the half-adder to control the high-speed input data by low-frequency pattern generators. The output in this measurement was an eye-diagram. Using this set-up, the circuit was successfully tested up to 20 GHz. The chip was fabricated using a standard HYPRES 1 kA cm −2 Nb Josephson junction fabrication process.

Superconductor Science and Technology•Apr 2, 2004•3 citations

Design of Datapath Circuits for a Bit-Parallel 8-bit RSFQ Microprocessor

Pei-Yao Qu, Guang-Ming Tang, Xiaochun Ye +3 more

Rapid single-flux-quantum (RSFQ) is expected to be the next generation integrated circuit technology because of its ultra-high-speed with ultra-low-power consumption. We propose datapath circuits for an 8-bit bit-parallel RSFQ microprocessor. The proposed datapath circuits process 8-bit data each clock cycle. Seven instructions are executed in the datapath, including ADD, ADDI, IN, OUT, LOADI, SRL and MOV. The datapath circuits consist of eight input ports, eight output ports, five multiplexers (MUXs), two 8-bit data registers and one 8-bit bit-parallel arithmetic logic unit (ALU). The datapath circuits contain 12 pipeline stages and 2993 JJs based on the Open Dataset of CONNECT Cell Library for AIST ADP2 without considering wiring cells. We perform digital simulation of the proposed datapath circuits. The simulation results show correct operation with the assumed frequency of 20 GHz.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2019•3 citations

Design of an 8-bit Bit-Parallel RSFQ Microprocessor

Pei-Yao Qu, Guang-Ming Tang, Jia-Hong Yang +4 more

With Moore's law approaching its physical limits, low-temperature computing technology is ushering in unprecedented development opportunities. Rapid single-flux-quantum (RSFQ) circuit technology is currently the most mature superconducting integrated circuit technology. Based on the current fabrication process, we propose an 8-bit bit-parallel RSFQ microprocessor. The proposed microprocessor processes 8-bit data each clock cycle. Ten different instructions are executed. The microprocessor mainly consists of an on-chip instruction memory, two data registers, an instruction decoder, an 8-bit bit-parallel arithmetic logic unit, and a program counter. The microprocessor contains 7702 JJs (based on the Open Dataset of CONNECT Cell Library for AIST ADP2) without considering splitters, Josephson transmission lines, and passive transmission lines. We perform a logic-level simulation of the proposed microprocessor. The simulation results show correct operation with a target frequency of 16.7 GHz.

IEEE Transactions on Applied Superconductivity•Aug 18, 2020•12 citations

Design of integrated rapid single flux quantum circuits for fabrication in a niobium-based foundry process

Hannes Töpfer, Thomas Ortlepp

The article describes the activities aimed at bringing superconductive high-speed electronics towards maturity.Integrated circuits based on the effects in superconducting materials have become feasible for some years already.The main focus lies on the so-called Rapid Single-Flux-Quantum (RSFQ) electronics which allows the combination of high operation frequencies (well above 20 GHz) with very low energy consumption when logical states are changed.Thus, this circuit technology exhibits a promising potential for realising energy-efficient modules for signal processing and computing.Recently, a dedicated design infrastructure has been developed in Europe.Closely associated is a foundry for digital RSFQ integrated circuits so that the fabrication of integrated circuits is viable.In the contribution, the basic features of the RSFQ circuit design are addressed with special emphasis on implementation on the wafer scale.

USB-Flash-Ausg.:#R#<br/>Information technology and electrical engineering - devices and systems, materials and technologies for the future : 54. IWK, Internationales Wissenschaftliches Kolloquium ; proceedings ; 07 - 10 September 2009 / Faculty of Electrical and Information Technology, Technische Universität Ilmenau. - Ilmenau : Verl. ISLE, 2009. - ISBN 978-3-938843-45-1•Nov 25, 2009•0 citations
Historically one of the most challenging high-speed rapid single flux quantum circuits to implement has been a parallel counter that sums a set of unweighted inputs and produces a binary-weighted word at the same clock rate. A 7-to-3 parallel counter that sums seven inputs has been designed and tested at the target clock frequency of 40 GHz and at frequencies up to 50 GHz using its own dedicated testbed. Yielded in both 10- and 20-kA/cm2 current densities using MIT Lincoln Laboratory's foundry, this 7-to-3 summing circuit has become a digital circuit benchmark. Most recently, a version with 15 parallel inputs producing a 4-bit output at the same target frequency was designed by combining 2 variants of 8-to-4 parallel counters. The first variant based on the 7-to-3 parallel counter, sums eight unweighted inputs, whereas the second variant sums two 4-bit binary-weighted words by pairwise summing of bits of equal weights. Design considerations for scaling this circuit will be discussed together with the circuit performance and yield.
Historically one of the most challenging high-speed RSFQ circuits to implement has been a parallel counter that sums a set of unweighted inputs and produces a binary-weighted word at the same clock rate. A 7-to-3 parallel counter that sums 7 inputs has been designed and tested at clock frequencies up to 50 GHz using its own dedicated testbed. Yielded in both 10- and 20-kA/cm2 current densities using MIT Lincoln Laboratory's foundry, this 7-to-3 summing circuit has become a digital circuit benchmark. Most recently, a version with 15 parallel inputs producing a 4-bit output was designed using two flavors of 8-to-4 summing circuits. The first (8-to-4a), based on the 7-to-3 parallel counter, sums 8 unweighted inputs whereas the second (8-to-4b) sums two 4-bit binary-weighted words by pairwise summing of bits of equal weights from two 8-to-4a blocks. Design considerations for scaling this circuit will be discussed together with the circuit performance and yield.
We have designed and demonstrated two versions of an ERSFQ 8-bit parallel adder. ERSFQ is a resistor-free approach to dc biasing of Single Flux Quantum circuits that dissipates orders of magnitude less power than a traditional RSFQ logic while operating and has zero dissipation in inactive mode. The adders were designed for and fabricated with various fabrication processes, including HYPRES's 1.0-μm 4-layer 4.5 kA/cm2process, HYPRES's 0.25-μm 4-layer 4.5 kA/cm2process, HYPRES's 0.25-μm 6-layer 4.5 kA/cm2planarized process, and MIT Lincoln Lab's 0.25-μm 4-layer 10 kA/cm2process. These circuits serve as a good LSI fabrication process benchmark. We describe design and report on test results of all versions of the adder.
We have designed, fabricated, and tested a rapid single flux quantum (RSFQ) 1 bit arithmetic logic unit (ALU) block. The circuit consists of three DC current driven SFQ switches and a half-adder. We successfully tested the half-adder cell at clock frequency up to 20 GHz. The switches were commutating output ports of the half-adder to produce AND, OR, XOR, or ADD functions. For a high-speed test, we attached two switches at the input ports of the half-adder to control the high-speed input data by low-frequency pattern generators. The output in this measurement was an eye-diagram. Using this set-up, the circuit was successfully tested up to 20 GHz. The chip was fabricated using a standard HYPRES 1 kA cm −2 Nb Josephson junction fabrication process.
Rapid single-flux-quantum (RSFQ) is expected to be the next generation integrated circuit technology because of its ultra-high-speed with ultra-low-power consumption. We propose datapath circuits for an 8-bit bit-parallel RSFQ microprocessor. The proposed datapath circuits process 8-bit data each clock cycle. Seven instructions are executed in the datapath, including ADD, ADDI, IN, OUT, LOADI, SRL and MOV. The datapath circuits consist of eight input ports, eight output ports, five multiplexers (MUXs), two 8-bit data registers and one 8-bit bit-parallel arithmetic logic unit (ALU). The datapath circuits contain 12 pipeline stages and 2993 JJs based on the Open Dataset of CONNECT Cell Library for AIST ADP2 without considering wiring cells. We perform digital simulation of the proposed datapath circuits. The simulation results show correct operation with the assumed frequency of 20 GHz.
With Moore's law approaching its physical limits, low-temperature computing technology is ushering in unprecedented development opportunities. Rapid single-flux-quantum (RSFQ) circuit technology is currently the most mature superconducting integrated circuit technology. Based on the current fabrication process, we propose an 8-bit bit-parallel RSFQ microprocessor. The proposed microprocessor processes 8-bit data each clock cycle. Ten different instructions are executed. The microprocessor mainly consists of an on-chip instruction memory, two data registers, an instruction decoder, an 8-bit bit-parallel arithmetic logic unit, and a program counter. The microprocessor contains 7702 JJs (based on the Open Dataset of CONNECT Cell Library for AIST ADP2) without considering splitters, Josephson transmission lines, and passive transmission lines. We perform a logic-level simulation of the proposed microprocessor. The simulation results show correct operation with a target frequency of 16.7 GHz.
The article describes the activities aimed at bringing superconductive high-speed electronics towards maturity.Integrated circuits based on the effects in superconducting materials have become feasible for some years already.The main focus lies on the so-called Rapid Single-Flux-Quantum (RSFQ) electronics which allows the combination of high operation frequencies (well above 20 GHz) with very low energy consumption when logical states are changed.Thus, this circuit technology exhibits a promising potential for realising energy-efficient modules for signal processing and computing.Recently, a dedicated design infrastructure has been developed in Europe.Closely associated is a foundry for digital RSFQ integrated circuits so that the fabrication of integrated circuits is viable.In the contribution, the basic features of the RSFQ circuit design are addressed with special emphasis on implementation on the wafer scale.