Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Physics Conference Series

Design and simulation of a novel magneto-optic trap

Deepthy Maria Mootheril, Nathan Kurz, S Mezinska, Thomas Pfeifer, Alexander Dorn

Published Jan 1, 2020• 0 citations
Publisher

Abstract

Synopsis In order to study ultracold gases by photoionization within a Reaction Microscope (ReMi), we investigate a new magneto-optical trap (MOT) configuration for cooling and trapping the atoms. Here we present the simulation results. In comparison with the conventional MOT, the new MOT has four laser beam axes. Two radial laser beam axes along x and y directions and two laser beam axes inclined ± 450 to the MOT/Feshbach coil axis (z axis).

DOI
10.1088/1742-6596/1412/12/122027

Related papers

The L.H.A. 2D magneto-optical trap: on the way to a continuous beam of cold atoms

Eve Aucouturier

A continuous beam of cold atoms is considered as an alternative to improve the performance of caesium frequency standards. A two-dimensional magneto-optical trap (2D MOT) is outlined. The assembling of three counter-propagating circularly polarised laser beams and of two magnetic field gradients along the horizontal axes leads to a transverse cooling and trapping, whereas in the vertical z-direction the atoms are only cooled and not trapped because of the zero magnetic field in this direction. In order to predict the characteristics of the beam of cold atoms, a simulation of the atomic trajectories was carried out by using a two-dimensional model of Doppler cooling and magneto-optical trapping. The velocity distribution of the atoms, which, due to the trapping and cooling process, enter the zone, where they are launched, is calculated.

European Frequency and Time Forum•Jan 1, 1996•0 citations

Magneto-optical trap reaction microscope for photoionization of cold strontium atoms

S. N. Ruan, Xinglong Yu, Zhenjie Shen +10 more

We developed a magneto-optical trap reaction microscope (MOTREMI) for strontium atoms by combining multiparticle coincident detection with the laser cooling technique. The present compact injection system enables the production of cold Sr atoms in three modes of two-dimensional (2D) magneto-optical trap (MOT) beam, molasses, and three-dimensional (3D) MOT, providing adjustable densities and ratios of the ground state $5{s}^{2}$ ($^{1}S_{0}$) and the excited states $5s5p{\phantom{\rule{4pt}{0ex}}}^{1}{P}_{1}$ and $^{3}P_{J}$. The target profiles including temperature, density, and size of the 3D MOT as well as the 2D MOT beam cold atomic flux were characterized in detail. Using the present setup, we investigate the single photoionization of Sr atoms with molasses through few-photons absorption in 800 nm, where ${\mathrm{Sr}}^{+}$ and ${e}^{\ensuremath{-}}$ are detected in coincidence and most of the ionization channels are identified. The momentum resolution for coincident ${\mathrm{Sr}}^{+}$ and ${e}^{\ensuremath{-}}$ along time-of-flight direction are achieved up to 0.12 a.u. and 0.02 a.u., respectively. The spectra of photoelectron ionized from the ground state as well as several excited states show distinct structures manifesting prominent contributions from multiphoton absorption. Detecting complete vector momenta of electrons and recoil ions in coincidence paves a way for further investigation of two-electron correlation dynamics and multielectron effects with alkaline-earth atoms.

arXiv:2310.00389•Physical Review A•Feb 20, 2024•6 citations

A Laser Cooled Lithium Beam Source for the Loading of a Magneto-Optical Trap in a Reaction Microscope

Dominik Globig

A new experiment is being built at the Max-Planck-Institut für Kernphysik (MPIK) within the PRIOC project (Precision studies on Ion Collisions) where a reaction microscope (Remi) and a magneto-optical trap (MOT) as target are combined to a so called MOTRemi. This setup will be implemented into the ion storage ring 'Testspeicherring' (TSR) of the MPIK. The world-wide unique combination of these three state-of-the-art technologies shall enable to perform kinematically complete studies of ion-atom collision with unprecedented detail and resolution. In this thesis, a two-dimensional magneto-optical trap (2D-MOT) was developed and tested as a source of slow lithium atoms for the loading of the target MOT. This method allows a very compact setup and oers a collimated beam and a ux of cold atoms comparable to the highest uxes achieved by using laser cooling. The temperature of the atomic beam was determined to be at the scale of a few Kelvin and, thus, it is already an adequate stand-alone target for momentum resolved experiments.

•Jan 1, 2011•0 citations

Development of a magneto optical trap for Rubidium 87

Huzifa Mohammed Ahamed Mohammed Elnour

ENGLISH ABSTRACT: A Magneto Optical Trap (MOT) is a configuration formed by three orthogonal pairs of counterpropagating circularly polarized laser beams and a magnetic field gradient. A MOT is used to cool, capture and trap large numbers of atoms in vacuum at very low temperature in K range. In this thesis the development of an experimental setup for realising a MOT of 87Rb atoms is presented. The atomic structure of Rb and the theoretical background of laser cooling and magneto optical trapping was reviewed. The influence of rubidium background pressure in the vacuum system, the laser beam size and the power and frequency on the number of the trapped atoms were studied in literature. The trapping and repumping lasers were characterised experimentally. Six circularly polarised trapping beams with equal power were formed and properly aligned to intersect at the center of the trapping cell. Two optical setups were designed and exploited to investigate and optimise the trapping beam polarisation. The repumping laser beam was successfully aligned and colinearly combined into all the trapping beams. Three different experimental setups for saturated absorption spectroscopy were developed. Saturated absorption spectra showing the hyperfine structure of both 85Rb and 87Rb isotopes were measured and are discussed. Using two saturated absorption spectroscopy setups, the frequencies of both lasers were successfully locked to the trapping and repumping transitions of 87Rb respectively. A rectangular trapping cell was designed and attached to the vacuum system. A pressure of about 10­¯7 mbar was achieved. The magnetic field coils were characterised and affixed on both sides of the cell in an anti-Helmholtz configuration. Setups for imaging and quantification of the 87Rb atoms in the MOT were designed. Finally, the procedures for demonstrating a MOT are presented. In conclusion, the current status of the project is reported, with recommendations for the future work.

•Dec 1, 2013•0 citations

Planar-Integrated Magneto-Optical Trap

Liang Chen, Chang-Jiang Huang, Xin‐Biao Xu +12 more

The magneto-optical trap (MOT) is an essential tool for collecting and preparing cold atoms with a wide range of applications. We demonstrate a planar-integrated MOT by combining an optical grating chip with a magnetic coil chip. The flat grating chip simplifies the conventional six-beam configuration down to a single laser beam, and the flat coil chip replaces the conventional anti-Helmholtz coils of cylindrical geometry. Up to ${10}^{6}$ cold ${}^{87}\mathrm{Rb}$ atoms are trapped by the planar-integrated MOT, with the atom cloud being approximately $6\phantom{\rule{0.2em}{0ex}}\mathrm{mm}$ above the chip surface. This configuration effectively reduces the volume, weight, and complexity of the MOT, bringing benefits to applications including gravimeter, clock, and quantum memory devices.

arXiv:2107.07367•Physical Review Applied•Mar 10, 2022•64 citations

A robust and modular cesium magneto-optical trap using divergent laser beams

Paola Luna, Kenneth Nakasone, Andrei Zhukov +4 more

Magneto-optical traps (MOTs) are a workhorse technology for neutral-atom quantum sensing, simulation, and computing. Here, we demonstrate a MOT optimized for inertial quantum sensing and precision metrology applications. Our MOT traps $4\times10^8$ cesium (Cs) atoms in a robust, modular system that achieves stable operation through two design features: (1) we use divergent cooling laser beams to reduce unwanted reflections and (2) optical elements are mounted in a fiber-coupled, compact, and modular cage rigidly attached to the vacuum chamber. Following polarization-gradient cooling (PGC), the system produces atom samples with temperatures below 10 $μ$K, similar to those achieved in conventional MOTs that use collimated laser beams. In addition, we observe trapping of $2\times10^7$ Cs atoms in a non-conventional MOT geometry, where the cooling laser beams are diagonal to the principal axis of the quadrupole magnetic field.

physics.atom-phCross-listedarXiv:2607.13145•AVS Quantum Science•Jul 16, 2026•1 citation
Synopsis In order to study ultracold gases by photoionization within a Reaction Microscope (ReMi), we investigate a new magneto-optical trap (MOT) configuration for cooling and trapping the atoms. Here we present the simulation results. In comparison with the conventional MOT, the new MOT has four laser beam axes. Two radial laser beam axes along x and y directions and two laser beam axes inclined ± 450 to the MOT/Feshbach coil axis (z axis).
A continuous beam of cold atoms is considered as an alternative to improve the performance of caesium frequency standards. A two-dimensional magneto-optical trap (2D MOT) is outlined. The assembling of three counter-propagating circularly polarised laser beams and of two magnetic field gradients along the horizontal axes leads to a transverse cooling and trapping, whereas in the vertical z-direction the atoms are only cooled and not trapped because of the zero magnetic field in this direction. In order to predict the characteristics of the beam of cold atoms, a simulation of the atomic trajectories was carried out by using a two-dimensional model of Doppler cooling and magneto-optical trapping. The velocity distribution of the atoms, which, due to the trapping and cooling process, enter the zone, where they are launched, is calculated.
We developed a magneto-optical trap reaction microscope (MOTREMI) for strontium atoms by combining multiparticle coincident detection with the laser cooling technique. The present compact injection system enables the production of cold Sr atoms in three modes of two-dimensional (2D) magneto-optical trap (MOT) beam, molasses, and three-dimensional (3D) MOT, providing adjustable densities and ratios of the ground state 5s25{s}^{2}5s2 (1S0^{1}S_{0}1S0​) and the excited states 5s5p1P15s5p{\phantom{\rule{4pt}{0ex}}}^{1}{P}_{1}5s5p1P1​ and 3PJ^{3}P_{J}3PJ​. The target profiles including temperature, density, and size of the 3D MOT as well as the 2D MOT beam cold atomic flux were characterized in detail. Using the present setup, we investigate the single photoionization of Sr atoms with molasses through few-photons absorption in 800 nm, where Sr+{\mathrm{Sr}}^{+}Sr+ and ${e}^{\ensuremath{-}}$ are detected in coincidence and most of the ionization channels are identified. The momentum resolution for coincident Sr+{\mathrm{Sr}}^{+}Sr+ and ${e}^{\ensuremath{-}}$ along time-of-flight direction are achieved up to 0.12 a.u. and 0.02 a.u., respectively. The spectra of photoelectron ionized from the ground state as well as several excited states show distinct structures manifesting prominent contributions from multiphoton absorption. Detecting complete vector momenta of electrons and recoil ions in coincidence paves a way for further investigation of two-electron correlation dynamics and multielectron effects with alkaline-earth atoms.
A new experiment is being built at the Max-Planck-Institut für Kernphysik (MPIK) within the PRIOC project (Precision studies on Ion Collisions) where a reaction microscope (Remi) and a magneto-optical trap (MOT) as target are combined to a so called MOTRemi. This setup will be implemented into the ion storage ring 'Testspeicherring' (TSR) of the MPIK. The world-wide unique combination of these three state-of-the-art technologies shall enable to perform kinematically complete studies of ion-atom collision with unprecedented detail and resolution. In this thesis, a two-dimensional magneto-optical trap (2D-MOT) was developed and tested as a source of slow lithium atoms for the loading of the target MOT. This method allows a very compact setup and oers a collimated beam and a ux of cold atoms comparable to the highest uxes achieved by using laser cooling. The temperature of the atomic beam was determined to be at the scale of a few Kelvin and, thus, it is already an adequate stand-alone target for momentum resolved experiments.
ENGLISH ABSTRACT: A Magneto Optical Trap (MOT) is a configuration formed by three orthogonal pairs of counterpropagating circularly polarized laser beams and a magnetic field gradient. A MOT is used to cool, capture and trap large numbers of atoms in vacuum at very low temperature in K range. In this thesis the development of an experimental setup for realising a MOT of 87Rb atoms is presented. The atomic structure of Rb and the theoretical background of laser cooling and magneto optical trapping was reviewed. The influence of rubidium background pressure in the vacuum system, the laser beam size and the power and frequency on the number of the trapped atoms were studied in literature. The trapping and repumping lasers were characterised experimentally. Six circularly polarised trapping beams with equal power were formed and properly aligned to intersect at the center of the trapping cell. Two optical setups were designed and exploited to investigate and optimise the trapping beam polarisation. The repumping laser beam was successfully aligned and colinearly combined into all the trapping beams. Three different experimental setups for saturated absorption spectroscopy were developed. Saturated absorption spectra showing the hyperfine structure of both 85Rb and 87Rb isotopes were measured and are discussed. Using two saturated absorption spectroscopy setups, the frequencies of both lasers were successfully locked to the trapping and repumping transitions of 87Rb respectively. A rectangular trapping cell was designed and attached to the vacuum system. A pressure of about 10­¯7 mbar was achieved. The magnetic field coils were characterised and affixed on both sides of the cell in an anti-Helmholtz configuration. Setups for imaging and quantification of the 87Rb atoms in the MOT were designed. Finally, the procedures for demonstrating a MOT are presented. In conclusion, the current status of the project is reported, with recommendations for the future work.
The magneto-optical trap (MOT) is an essential tool for collecting and preparing cold atoms with a wide range of applications. We demonstrate a planar-integrated MOT by combining an optical grating chip with a magnetic coil chip. The flat grating chip simplifies the conventional six-beam configuration down to a single laser beam, and the flat coil chip replaces the conventional anti-Helmholtz coils of cylindrical geometry. Up to 106{10}^{6}106 cold 87Rb{}^{87}\mathrm{Rb}87Rb atoms are trapped by the planar-integrated MOT, with the atom cloud being approximately 6mm6\phantom{\rule{0.2em}{0ex}}\mathrm{mm}6mm above the chip surface. This configuration effectively reduces the volume, weight, and complexity of the MOT, bringing benefits to applications including gravimeter, clock, and quantum memory devices.
Magneto-optical traps (MOTs) are a workhorse technology for neutral-atom quantum sensing, simulation, and computing. Here, we demonstrate a MOT optimized for inertial quantum sensing and precision metrology applications. Our MOT traps 4×1084\times10^84×108 cesium (Cs) atoms in a robust, modular system that achieves stable operation through two design features: (1) we use divergent cooling laser beams to reduce unwanted reflections and (2) optical elements are mounted in a fiber-coupled, compact, and modular cage rigidly attached to the vacuum chamber. Following polarization-gradient cooling (PGC), the system produces atom samples with temperatures below 10 μμμK, similar to those achieved in conventional MOTs that use collimated laser beams. In addition, we observe trapping of 2×1072\times10^72×107 Cs atoms in a non-conventional MOT geometry, where the cooling laser beams are diagonal to the principal axis of the quadrupole magnetic field.