Superconductive Device: High Sensitive Single Photon Detection Technology using Superconducting Nanowire

Shigehito Miki, Taro Yamashita, Masahiro Yabuno +2 more

太郎 山下, Taro Yamashita

Burm Baek, Adriana E. Lita, Varun Boehm Verma +1 more

We have developed a single-photon detector based on superconducting amorphous tungsten–silicon alloy (a-WxSi1−x) nanowire. Our device made from a uniform a-WxSi1−x nanowire covers a practical detection area (16 μm×16 μm) and shows high sensitivity featuring a plateau of the internal quantum efficiencies, i.e., efficiencies of generating an electrical pulse per absorbed photon, over a broad wavelength and bias range. This material system for superconducting nanowire detector technology could overcome the limitations of the prevalent nanowire devices based on NbN and lead to more practical, ideal single-photon detectors having high efficiency, low noise, and high count rates.

Zifan Hao, Kai Zou, Yun Meng +9 more

Superconducting nanowire single-photon detectors (SNSPDs) have become a mainstream photon-counting technology that has been used in various applications. So far, most multi-channel SNSPD systems, either reported in literature or been commercially available, are polarization sensitive, that is, the system detection efficiency (SDE) of each channel is dependent on the state of polarization of the to-be-detected photons. Here, we report on an eight-channel system with fractal superconducting nanowire single-photon detectors working in the wavelength range of 930-940 nm that all feature low polarization sensitivity. In a close-cycled Gifford-McMahon cryocooler system with the base temperature of 2.2 K, we install and compare the performance of two types of devices: (1) SNSPD, composed of a single, continuous nanowire, and (2) superconducting nanowire avalanche photodetector (SNAP), composed of 16 cascaded units of two nanowires electrically connected in parallel. The highest system detection efficiency (SDE) among the eight channels reaches 96−5+4%, with polarization sensitivity of 1.02 and dark-count rate of 13 counts per second. The average SDE for eight channels for all states of polarization is estimated to be 90 ± 5%. We conclude that both the SNSPDs and the SNAPs can reach saturated, high SDE at the wavelength of interest, and the SNSPDs show lower dark- (false-) count rates while the SNAPs show better properties in the time domain. Using this system, we showcase the measurements of the second-order photon-correlation functions of light emission from a single-photon source based on a semiconductor quantum dot and from a pulsed laser. We believe that our work provides new choices of systems with single-photon detectors combining the merits of high SDE, low polarization sensitivity, and low noise that can be tailored for different applications.

Matthieu Perrenoud

The important development of quantum technologies during the past decade brought the need for efficient, fast and precise single-photon detection. Superconducting Nanowire Single-Photon Detectors (SNSPDs) are currently considered as the detection method of choice when extreme performances are required. This thesis aimed at investigating this technology, with the objective of improving existing detectors for high-rate applications in quantum communication. This document presents the work and result achieved over four years dedicated to the subject. During this thesis, single-photon detection based on superconducting nanowire has been investigated, with a particular focus on specific requirements for high speed quantum communication applications. The work achieved ranges from the design and nano-fabrication of the structures, to the characterization and the understanding of the physics, detection models and fundamental limits of the devices.