Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chip

High-performance eight-channel system with fractal superconducting nanowire single-photon detectors

Zifan Hao, Kai Zou, Yun Meng, Jun-Yong Yan, Fangyuan Li, Yong-Heng Huo, Chao‐Yuan Jin, Feng Liu, Thomas Descamps, Adrian Iovan, Val Zwiller, Xiaolong Hu

Published Feb 27, 2024• 17 citations
Publisher

Abstract

Superconducting nanowire single-photon detectors (SNSPDs) have become a mainstream photon-counting technology that has been used in various applications. So far, most multi-channel SNSPD systems, either reported in literature or been commercially available, are polarization sensitive, that is, the system detection efficiency (SDE) of each channel is dependent on the state of polarization of the to-be-detected photons. Here, we report on an eight-channel system with fractal superconducting nanowire single-photon detectors working in the wavelength range of 930-940 nm that all feature low polarization sensitivity. In a close-cycled Gifford-McMahon cryocooler system with the base temperature of 2.2 K, we install and compare the performance of two types of devices: (1) SNSPD, composed of a single, continuous nanowire, and (2) superconducting nanowire avalanche photodetector (SNAP), composed of 16 cascaded units of two nanowires electrically connected in parallel. The highest system detection efficiency (SDE) among the eight channels reaches 96−5+4%, with polarization sensitivity of 1.02 and dark-count rate of 13 counts per second. The average SDE for eight channels for all states of polarization is estimated to be 90 ± 5%. We conclude that both the SNSPDs and the SNAPs can reach saturated, high SDE at the wavelength of interest, and the SNSPDs show lower dark- (false-) count rates while the SNAPs show better properties in the time domain. Using this system, we showcase the measurements of the second-order photon-correlation functions of light emission from a single-photon source based on a semiconductor quantum dot and from a pulsed laser. We believe that our work provides new choices of systems with single-photon detectors combining the merits of high SDE, low polarization sensitivity, and low noise that can be tailored for different applications.

DOI
10.1016/j.chip.2024.100087

Related papers

Fractal superconducting nanowire avalanche photodetector at 1550 nm with 60% system detection efficiency and 1.05 polarization sensitivity

Yun Meng, Kai Zou, Nan Hu +6 more

Superconducting nanowire (nanostrip) single-photon detectors (SNSPDs) have shown unprecedented detection efficiency and timing properties, but simultaneously achieving polarization-insensitive high detection efficiency, low dark-count rate (DCR), fast speed, and low timing jitter remains a challenge. Here we report on our design, fabrication, and characterization of a cascaded superconducting avalanche photodetector composed of 40 nm wide NbTiN nanowires patterned into fractal curves. At the base temperature of 2.7 K, the device exhibits 60±3% system detection efficiency at the wavelength of 1550 nm, 1.05 polarization sensitivity, 220 cps DCR, 4 ns recovery time, and 45 ps timing jitter. This Letter not only demonstrates these combined properties on a single detector that was unobtainable previously, but also shows that that current-crowding effect remarkably permits decent internal detection efficiency. These counter-intuitive results expand the understanding pertaining to the device physics of SNSPDs.

Optics Letters•Dec 12, 2019•23 citations

Fractal Superconducting Nanowires Detect Infrared Single Photons with 84% System Detection Efficiency, 1.02 Polarization Sensitivity, and 20.8 ps Timing Resolution

Yun Meng, Kai Zou, Nan Hu +6 more

The near-unity system detection efficiency (SDE) and excellent timing resolution of superconducting nanowire single-photon detectors (SNSPDs), combined with their other merits, have enabled many classical and quantum photonic applications. However, the prevalent design based on meandering nanowires makes SDE dependent on the polarization states of the incident photons; for unpolarized light, the major merit of high SDE would get compromised, which could be detrimental to photon-starved applications. Here, we create SNSPDs with an arced fractal geometry that almost completely eliminates this polarization dependence of the SDE, and we experimentally demonstrate 84 ± 3% SDE, 1.02 –0.02 +0.06 polarization sensitivity at the wavelength of 1575 nm, and 20.8 ps timing jitter in a 0.1 W closed-cycle Gifford–McMahon cryocooler, at the base temperature of 2.0 K. This demonstration provides a novel, practical device structure of SNSPDs, allowing for operation in the visible, near-infrared, and mid-infrared spectral ranges, and paves the way for polarization-insensitive single-photon detection with high SDE and high timing resolution.

arXiv:2012.06730•ACS Photonics•Apr 13, 2022•40 citations

Multi-channel system with high-performance fractal superconducting nanowire single-photon detectors

Zifan Hao, Kai Zou, Yun Meng +4 more

We report on an eight-channel fractal SNSPD system in the wavelength range of 940 nm with minimal polarization sensitivity. The best channel exhibits 96% system detection efficiency and 19 cps dark-count rate.

Optical Fiber Communication Conference•Jan 1, 2024•0 citations

Stable, high-performance operation of a fiber-coupled superconducting nanowire avalanche photon detector

Shigehito Miki, Masahiro Yabuno, Taro Yamashita +1 more

Recent progress in the development of superconducting nanowire single photon detectors (SSPD or SNSPD) has delivered excellent performance, and has had a great impact on a range of research fields. Significant efforts are being made to further improve the technology, and a primary concern remains to resolve the trade-offs between detection efficiency (DE), timing jitter, and response speed. We present a stable and high-performance fiber-coupled niobium titanium nitride superconducting nanowire avalanche photon detector (SNAP) that resolves these trade-offs. Autocorrelation function measurement revealed an afterpulse-free operation in serially connected two SNAP (SC-2SNAP), even in the absence of a choke inductor, achieving a 7.65 times faster response speed than standard SSPDs. The SC-2SNAP device showed a system detection efficiency (SDE) of 81.0% with wide bias current margin, a dark count rate of 6.8 counts/s, and full width at half maximum timing jitter of 68 ps, operating in a practical Gifford-McMahon cryocooler system.

arXiv:1701.07247•Optics Express•Mar 15, 2017•75 citations

Fractal superconducting nanowires detect infrared single photons with 91% polarization-independent system efficiency and 19 ps timing resolution

Yun Meng, Kai Zou, Nan Hu +6 more

The near-unity detection efficiency and excellent timing resolution of superconducting nanowire single-photon detectors (SNSPDs), combined with their other merits, have enabled many classical and quantum photonic applications. However, the prevalent design based on meandering nanowires makes the detection efficiency dependent on the polarization states of the incident photons; for unpolarized light, the major merit of high detection efficiency would get compromised, which could be detrimental for photon-starved applications. In quantum-key distribution systems, the polarization dependence of detection efficiency of the SNSPDs could also be a vulnerable security loophole. Here, we create SNSPDs with an arced fractal topology that almost completely eliminates this polarization dependence of the detection efficiency while preserving other major merits of the SNSPDs. We experimentally demonstrated 91$\pm$2% system detection efficiency at the wavelength of 1590 nm for photons in any polarization state and 19 ps timing jitter. The detector was fiber-coupled and fully packaged in a 0.1-W close-cycled Gifford-McMahon cryocooler. This demonstration provides a novel, practical device structure of SNSPDs, allowing for operation in the visible, near- and mid-infrared spectral ranges, and paves the way for polarization-insensitive single-photon detection with high detection efficiency and high timing resolution.

•Dec 12, 2020•2 citations

Superconducting microstrip single-photon detector with system detection efficiency over 90% at 1550 nm

Guangzhao Xu, Wei-Jun Zhang, Li-Xing You +9 more

Generally, a superconducting nanowire single-photon detector (SNSPD) is composed of wires with a typical width of ∼ 100 nm . Recent studies have found that superconducting strips with a micrometer-scale width can also detect single photons. Compared with the SNSPD covering the same area, the superconducting microstrip single-photon detector (SMSPD) has smaller kinetic inductance, higher working current, and lower requirements in fabrication accuracy, providing potential applications in the development of ultralarge active area detectors. However, the study of SMSPD is still in its infancy, and the realization of its high-performance and practical use remains an open question. This study demonstrates a NbN SMSPD with a nearly saturated system detection efficiency (SDE) of ∼ 92.2 % at a dark count rate of ∼ 200 cps , a polarization sensitivity of ∼ 1.03 , and a minimum timing jitter of ∼ 48 ps at the telecom wavelength of 1550 nm when coupled with a single-mode fiber and operated at 0.84 K. Furthermore, the detector’s SDE is over 70% when operated at a 2.1 K closed-cycle cryocooler.

arXiv:2101.05407•Photonics Research•Mar 23, 2021•68 citations
Superconducting nanowire single-photon detectors (SNSPDs) have become a mainstream photon-counting technology that has been used in various applications. So far, most multi-channel SNSPD systems, either reported in literature or been commercially available, are polarization sensitive, that is, the system detection efficiency (SDE) of each channel is dependent on the state of polarization of the to-be-detected photons. Here, we report on an eight-channel system with fractal superconducting nanowire single-photon detectors working in the wavelength range of 930-940 nm that all feature low polarization sensitivity. In a close-cycled Gifford-McMahon cryocooler system with the base temperature of 2.2 K, we install and compare the performance of two types of devices: (1) SNSPD, composed of a single, continuous nanowire, and (2) superconducting nanowire avalanche photodetector (SNAP), composed of 16 cascaded units of two nanowires electrically connected in parallel. The highest system detection efficiency (SDE) among the eight channels reaches 96−5+4%, with polarization sensitivity of 1.02 and dark-count rate of 13 counts per second. The average SDE for eight channels for all states of polarization is estimated to be 90 ± 5%. We conclude that both the SNSPDs and the SNAPs can reach saturated, high SDE at the wavelength of interest, and the SNSPDs show lower dark- (false-) count rates while the SNAPs show better properties in the time domain. Using this system, we showcase the measurements of the second-order photon-correlation functions of light emission from a single-photon source based on a semiconductor quantum dot and from a pulsed laser. We believe that our work provides new choices of systems with single-photon detectors combining the merits of high SDE, low polarization sensitivity, and low noise that can be tailored for different applications.
Superconducting nanowire (nanostrip) single-photon detectors (SNSPDs) have shown unprecedented detection efficiency and timing properties, but simultaneously achieving polarization-insensitive high detection efficiency, low dark-count rate (DCR), fast speed, and low timing jitter remains a challenge. Here we report on our design, fabrication, and characterization of a cascaded superconducting avalanche photodetector composed of 40 nm wide NbTiN nanowires patterned into fractal curves. At the base temperature of 2.7 K, the device exhibits 60±3% system detection efficiency at the wavelength of 1550 nm, 1.05 polarization sensitivity, 220 cps DCR, 4 ns recovery time, and 45 ps timing jitter. This Letter not only demonstrates these combined properties on a single detector that was unobtainable previously, but also shows that that current-crowding effect remarkably permits decent internal detection efficiency. These counter-intuitive results expand the understanding pertaining to the device physics of SNSPDs.
The near-unity system detection efficiency (SDE) and excellent timing resolution of superconducting nanowire single-photon detectors (SNSPDs), combined with their other merits, have enabled many classical and quantum photonic applications. However, the prevalent design based on meandering nanowires makes SDE dependent on the polarization states of the incident photons; for unpolarized light, the major merit of high SDE would get compromised, which could be detrimental to photon-starved applications. Here, we create SNSPDs with an arced fractal geometry that almost completely eliminates this polarization dependence of the SDE, and we experimentally demonstrate 84 ± 3% SDE, 1.02 –0.02 +0.06 polarization sensitivity at the wavelength of 1575 nm, and 20.8 ps timing jitter in a 0.1 W closed-cycle Gifford–McMahon cryocooler, at the base temperature of 2.0 K. This demonstration provides a novel, practical device structure of SNSPDs, allowing for operation in the visible, near-infrared, and mid-infrared spectral ranges, and paves the way for polarization-insensitive single-photon detection with high SDE and high timing resolution.
Recent progress in the development of superconducting nanowire single photon detectors (SSPD or SNSPD) has delivered excellent performance, and has had a great impact on a range of research fields. Significant efforts are being made to further improve the technology, and a primary concern remains to resolve the trade-offs between detection efficiency (DE), timing jitter, and response speed. We present a stable and high-performance fiber-coupled niobium titanium nitride superconducting nanowire avalanche photon detector (SNAP) that resolves these trade-offs. Autocorrelation function measurement revealed an afterpulse-free operation in serially connected two SNAP (SC-2SNAP), even in the absence of a choke inductor, achieving a 7.65 times faster response speed than standard SSPDs. The SC-2SNAP device showed a system detection efficiency (SDE) of 81.0% with wide bias current margin, a dark count rate of 6.8 counts/s, and full width at half maximum timing jitter of 68 ps, operating in a practical Gifford-McMahon cryocooler system.
The near-unity detection efficiency and excellent timing resolution of superconducting nanowire single-photon detectors (SNSPDs), combined with their other merits, have enabled many classical and quantum photonic applications. However, the prevalent design based on meandering nanowires makes the detection efficiency dependent on the polarization states of the incident photons; for unpolarized light, the major merit of high detection efficiency would get compromised, which could be detrimental for photon-starved applications. In quantum-key distribution systems, the polarization dependence of detection efficiency of the SNSPDs could also be a vulnerable security loophole. Here, we create SNSPDs with an arced fractal topology that almost completely eliminates this polarization dependence of the detection efficiency while preserving other major merits of the SNSPDs. We experimentally demonstrated 91$\pm$2% system detection efficiency at the wavelength of 1590 nm for photons in any polarization state and 19 ps timing jitter. The detector was fiber-coupled and fully packaged in a 0.1-W close-cycled Gifford-McMahon cryocooler. This demonstration provides a novel, practical device structure of SNSPDs, allowing for operation in the visible, near- and mid-infrared spectral ranges, and paves the way for polarization-insensitive single-photon detection with high detection efficiency and high timing resolution.
Generally, a superconducting nanowire single-photon detector (SNSPD) is composed of wires with a typical width of ∼ 100 nm . Recent studies have found that superconducting strips with a micrometer-scale width can also detect single photons. Compared with the SNSPD covering the same area, the superconducting microstrip single-photon detector (SMSPD) has smaller kinetic inductance, higher working current, and lower requirements in fabrication accuracy, providing potential applications in the development of ultralarge active area detectors. However, the study of SMSPD is still in its infancy, and the realization of its high-performance and practical use remains an open question. This study demonstrates a NbN SMSPD with a nearly saturated system detection efficiency (SDE) of ∼ 92.2 % at a dark count rate of ∼ 200 cps , a polarization sensitivity of ∼ 1.03 , and a minimum timing jitter of ∼ 48 ps at the telecom wavelength of 1550 nm when coupled with a single-mode fiber and operated at 0.84 K. Furthermore, the detector’s SDE is over 70% when operated at a 2.1 K closed-cycle cryocooler.