We report on an industry-grade complementary metal-oxide semiconductor (CMOS)-compatible qubit fabrication approach using a CMOS pilot line, enabling a yield of functional devices that reaches 92.8%, with a resistance spread evaluated across the full wafer 200 mm in diameter of 12.4% and relaxation times
T1 approaching $80\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$. Furthermore, we conducted a comprehensive analysis of wafer-scale room-temperature (RT) characteristics collected from multiple wafers and fabrication runs, focusing on RT measurements and their correlation to low-temperature qubit parameters. From defined test structures, an across-wafer Josephson junction (JJ) area variation of 10.1% and oxide barrier variation of 7.2% was calculated. Additionally, from the room-temperature JJ characterization the qubit frequency can be derived at the wafer level by applying the Ambegaokar-Baratoff model before making low-temperature measurements. This sets the stage for precooldown wafer-level JJ evaluation and sorting. In particular, such early device characterization and validation are crucial for increasing the fabrication yield and qubit frequency targeting, which currently represent major scaling challenges. Furthermore, this enables the fabrication of large multichip quantum systems in the future. Our analysis highlights the great potential of CMOS-compatible industry-style fabrication of superconducting qubits for scalable quantum computing in a foundry pilot line cleanroom.
We report on the low-frequency noise performance of niobium dc superconducting quantum interference devices (SQUIDs), which contain nanobridges fabricated by focused ion beam lithography as the active Josephson elements. The devices have feature sizes down to 70 nm. We have measured devices of different loop sizes in two readout configurations: nano-scale loop sizes in small signal mode using a series SQUID array as a low-temperature pre-amplifier, and larger micron-scale loop sizes in a conventional flux-locked loop. We investigate the different contributions to the low frequency noise and report on electrical measurements made in applied magnetic fields of up to 0.5 T (in-plane) and 0.1 T (perpendicular to the plane) at operating temperatures around 7 K. We compare the measurements with the existing theories of noise in a dc SQUID.
TRW has been developing low noise microwave parametric amplifier with Josephson junction SQUIDs (Superconducting Quantum Interference Devices). This report summarizes the second phase of the program which includes measurement of the amplifier performance at X-band, and design and fabrication of a SQUID array amplifier. We have demonstrated gain in excess of 10 dB at 8.4 GHz and a measured noise temperature equal to 6K with an uncertainty of (+15/-7)K. Arrays with both 25 and 50 elements and 50 ohmi impedance have been designed and fabricated. These arrays should increase the dynamic range of the amplifier.