Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Two-qubit microwave quantum logic gate with 9Be+ ions in scalable surface-electrode ion traps

H. Hahn

Published Jan 1, 2019• 8 citations
Publisher

Abstract

Towards the goal of a large-scale quantum computer based on trapped ions, near-field microwaves represent a promising approach to perform the techni- cally challenging key operation of a two-qubit entangling gate. In this thesis we present the first microwave-driven two-qubit gate in 9Be+ ions employing a first-order field-independent qubit transition and a scalable surface-electrode ion trap at room temperature. We test the quality of the gate operation by producing a maximally entangled state and measuring the resulting state preparation fidelity in a reduced tomography procedure. For the best two- qubit gate achieved in the system we find this fidelity to be F = 98.2 ± 1.2 %. Following a comprehensive error analysis based on numerical simulations and experimentally determined input parameters, we identify current infidelity con- tributions of the apparatus. Here, the natural error source of the microwave near-field approach, namely fluctuating AC Zeeman shifts, could be reduced to the 10^−4 level due to the optimized design of the employed microwave con- ductor. As we find that the three largest errors can all be reduced upon purely technical improvements, higher fidelities are feasible in the future. Besides the gate realization, the thesis also comprises the initial characterization of the employed ion trap as well as the design and construction of a Raman laser at ∼ 313 nm which is utilized to perform near ground state cooling of radial modes of a single- and two-ion crystal. Here, ensuing heating rate measure- ments on a single-ion’s radial modes show good agreement with the electric- field noise spectral density expected from literature given the chosen mode frequency and nearest ion-to-electrode distance of 70 µm. Finally, we present the operation of a first multi-layer ion trap whose electrode layout features a 3-dimensional microwave conductor intended for performing microwave-driven two-qubit gates. Following a characterization of the resulting near-field pat- tern using a single ion as a local field probe, we find the multi-layer conductor to have significantly better field properties when compared to an equivalent single-layer design. Given these promising results, future work will focus on the integration of similar microwave circuitry in a multi-zone trap array as envisioned by the QCCD architecture.

DOI
10.15488/5128

Related papers

Robust high fidelity microwave near-field entangling quantum logic gate

Giorgio Zarantonello

Trapped ions, together with superconducting qubits, are one of the two leading hardware platforms for scalable quantum information processing. The development of quantum computers represents a major technological breakthrough comparable to the introduction of classical computing. The benefits of this technology are currently limited by the technical capability to perform high fidelity entangling operations on the qubits. When gate fidelities surpass the fault-tolerance threshold it becomes possible, through error correction, to increase the system size to an arbitrary number of qubits. In this cumulative thesis we address some of the issues in the scalability of the trapped-ion quantum computer based on microwave near-fields. In this approach, gate operations on one or multiple ions are driven by an oscillating magnetic field generated by a current flowing through a conductor. In the first part of this work we discuss the design of traps toward the implementation of large scale systems. We introduce the basic design of a surface-electrode ion trap with embedded microwave conductors. The oscillating magnetic field required to perform the operations is generated by a single optimized conductor. We discuss the simulation and characterization of the magnetic field pattern, which is fixed by the microwave conductor design. In addition, we demonstrate the capability to simulate, fabricate and characterize a multilayer surface ion trap. Multilayer traps are a key aspect for scalability since they are necessary to achieve large system sizes, with many `ion registers', where the registers are interconnected by physically transporting ions between them. In the second part of this thesis we demonstrate the implementation of a two-qubit entangling gate and we explore the possibilities offered by quantum control methods to improve its fidelity. We perform an entangling gate on two 9Be+ ions and measure a Bell state fidelity of 98.2(1.2)%. Error characterization shows that the gate result is limited by technical issues connected to the ions' motional states. To reduce these errors we apply amplitude modulation of the gate microwave drive. After stabilization of the ions' radial modes, we obtain an amplitude modulated gate with infidelity in the 10^-3 range. The result is confirmed by analyzing the data using three different methods. Using additional dynamic decoupling techniques, these results could bring microwave near-field gates past the fault-tolerance threshold.

•Jan 1, 2020•1 citation

Integrated 9Be+ multi-qubit gate device for the ion-trap quantum computer

H. Hahn, Giorgio Zarantonello, M. Schulte +3 more

Abstract We demonstrate the experimental realization of a two-qubit Mølmer–Sørensen gate on a magnetic field-insensitive hyperfine transition in 9 Be + ions using microwave near-fields emitted by a single microwave conductor embedded in a surface-electrode ion trap. The design of the conductor was optimized to produce a high oscillating magnetic field gradient at the ion position. The measured gate fidelity is determined to be 98.2 ± 1.2% and is limited by technical imperfections, as is confirmed by a comprehensive numerical error analysis. The conductor design can potentially simplify the implementation of multi-qubit gates and represents a self-contained, scalable module for entangling gates within the quantum CCD architecture for an ion-trap quantum computer.

arXiv:1902.07028•npj Quantum Information•Aug 16, 2019•35 citations

Surface-electrode ion traps for scalable quantum computing

D. T. C. Allcock

The major challenges in trapped-ion quantum computation are to scale up few-ion experiments to many qubits and to improve control techniques so that quantum logic gates can be carried out with higher fidelities. This thesis reports experimental progress in both of these areas. In the early part of the thesis we describe the fabrication of a surface-electrode ion trap, the development of the apparatus and techniques required to operate it and the successful trapping of 40Ca+ ions. Notably we developed methods to control the orientation of the principal axes and to minimise ion micromotion. We propose a repumping scheme that simplifies heating rate measurements for ions with low-lying D levels, and use it to characterise the electric field noise in the trap. Surface-electrode traps are important because they offer a route to dense integration of electronic and optical control elements using existing microfabrication technology. We explore this scaling route by testing a series of three traps that were microfabricated at Sandia National Laboratories. Investigations of micromotion and charging of the surface by laser beams were carried out and improvements to future traps are suggested. Using one of these traps we also investigated anomalous electrical noise from the electrode surfaces and discovered that it can be reduced by cleaning with a pulsed laser. A factor of two decrease was observed; this represents the first in situ removal of this noise source, an important step towards higher gate fidelities. In the second half of the thesis we describe the design and construction of an experiment for the purpose of replacing laser-driven multi-qubit quantum logic gates with microwave-driven ones. We investigate magnetic-field-independent hyperfine qubits in 40Ca+ as suitable qubits for this scheme. We make a design study of how best to integrate an ion trap with the microwave conductors required to implement the gate and propose a novel integrated resonant structure. The trap was fabricated and ions were successfully loaded. Single-qubit experiments show that the microwave fields above the trap are in excellent agreement with software simulations. There are good prospects for demonstrating a multi-qubit gate in the near future. We conclude by discussing the possibilities for larger-scale quantum computation by combining microfabricated traps and microwave control.

•Jan 1, 2011•5 citations

Integrated 9Be+ multi-qubit gate device for the ion-trap quantum computer

H. Hahn, Giorgio Zarantonello, Schulte, M. +3 more

We demonstrate the experimental realization of a two-qubit Mølmer–Sørensen gate on a magnetic field-insensitive hyperfine transition in 9Be+ ions using microwave near-fields emitted by a single microwave conductor embedded in a surface-electrode ion trap. The design of the conductor was optimized to produce a high oscillating magnetic field gradient at the ion position. The measured gate fidelity is determined to be 98.2 ± 1.2% and is limited by technical imperfections, as is confirmed by a comprehensive numerical error analysis. The conductor design can potentially simplify the implementation of multi-qubit gates and represents a self-contained, scalable module for entangling gates within the quantum CCD architecture for an ion-trap quantum computer.

•Jan 1, 2019•30 citations

A high-fidelity microwave driven two-qubit quantum logic gate in 43Ca+

M. A. Sepiol

Quantum computers offer great potential for significant speedup in executing certain algorithms compared to their classical counterparts. One of the most promising physical systems in which implementing such a device seems viable are trapped atomic ions. All of the fundamental operations needed for quantum information processing have already been experimentally demonstrated in trapped ion systems. Today, the remaining two obstacles are to improve the fidelities of these operations up to the point where quantum error correction techniques can be successfully applied, as well as to scale up the present systems to a higher number of quantum bits (qubits). This thesis addresses both issues. On the one hand, it decribes the experimental implementation of a high-fidelity two-qubit quantum logic gate, which is the most technically demanding fundamental operation to realise in practice. On the other hand, the presented work is carried out in a microfabricated surface ion trap – an architecture that holds the promise of scalability. The gate is applied directly to hyperfine "atomic clock" qubits in 43Ca+ ions using the near-field microwave magnetic field gradient produced by an integrated trap electrode. To protect the gate against fluctuating energy shifts of the qubit states, as well as to avoid the need to null the microwave field at the position of the ions, a dynamically decoupled Mølmer-Sørensen scheme is employed. After accounting for state preparation and measurement errors, the achieved gate fidelity is 99.7(1)%. In previous work, the same apparatus has been used to demonstrate coherence times of T*2 ≈ 50 s and all single-qubit operations with fidelity > 99.95%. To gain access to the "atomic clock" qubit transition in 43Ca+, a static magnetic field of 146G is applied. The resulting energy level Zeeman-structure is spread over many times the linewidth of the atomic transition used for Doppler cooling. This thesis presents a simple and robust method for Doppler cooling and obtaining high fluorescence from this qubit in spite of the complicated level structure. A temperature of 0.3mK, slightly below the Doppler limit, is reached.

•Jan 1, 2016•1 citation

Surface Ion Trap for Fast Microwave Gates

Ilya Gerasin, Ilya A. Semerikov, Wei Zhang

Microwave-driven quantum logic gates in trapped-ion systems offer a scalable and laser-free alternative to optical control, with the potential for robust integration into surface-electrode trap architectures. In this work, we present a systematic design guideline for planar ion traps optimized for fast two-qubit microwave gates using chip-integrated conductors. We investigate two electrode configurations, one employing a single microwave line for driving σ transitions, and another with two symmetric lines for π transitions. Through finite-element simulations, we analyze ion height, magnetic field gradients, heating effects, and gate durations under realistic cryogenic conditions. Our results show that both configurations can achieve two-qubit gate times in the order of 10 μs for Be+9 and Ca+40 ions.

Chips•Oct 5, 2025•2 citations
Towards the goal of a large-scale quantum computer based on trapped ions, near-field microwaves represent a promising approach to perform the techni- cally challenging key operation of a two-qubit entangling gate. In this thesis we present the first microwave-driven two-qubit gate in 9Be+ ions employing a first-order field-independent qubit transition and a scalable surface-electrode ion trap at room temperature. We test the quality of the gate operation by producing a maximally entangled state and measuring the resulting state preparation fidelity in a reduced tomography procedure. For the best two- qubit gate achieved in the system we find this fidelity to be F = 98.2 ± 1.2 %. Following a comprehensive error analysis based on numerical simulations and experimentally determined input parameters, we identify current infidelity con- tributions of the apparatus. Here, the natural error source of the microwave near-field approach, namely fluctuating AC Zeeman shifts, could be reduced to the 10^−4 level due to the optimized design of the employed microwave con- ductor. As we find that the three largest errors can all be reduced upon purely technical improvements, higher fidelities are feasible in the future. Besides the gate realization, the thesis also comprises the initial characterization of the employed ion trap as well as the design and construction of a Raman laser at ∼ 313 nm which is utilized to perform near ground state cooling of radial modes of a single- and two-ion crystal. Here, ensuing heating rate measure- ments on a single-ion’s radial modes show good agreement with the electric- field noise spectral density expected from literature given the chosen mode frequency and nearest ion-to-electrode distance of 70 µm. Finally, we present the operation of a first multi-layer ion trap whose electrode layout features a 3-dimensional microwave conductor intended for performing microwave-driven two-qubit gates. Following a characterization of the resulting near-field pat- tern using a single ion as a local field probe, we find the multi-layer conductor to have significantly better field properties when compared to an equivalent single-layer design. Given these promising results, future work will focus on the integration of similar microwave circuitry in a multi-zone trap array as envisioned by the QCCD architecture.
Trapped ions, together with superconducting qubits, are one of the two leading hardware platforms for scalable quantum information processing. The development of quantum computers represents a major technological breakthrough comparable to the introduction of classical computing. The benefits of this technology are currently limited by the technical capability to perform high fidelity entangling operations on the qubits. When gate fidelities surpass the fault-tolerance threshold it becomes possible, through error correction, to increase the system size to an arbitrary number of qubits. In this cumulative thesis we address some of the issues in the scalability of the trapped-ion quantum computer based on microwave near-fields. In this approach, gate operations on one or multiple ions are driven by an oscillating magnetic field generated by a current flowing through a conductor. In the first part of this work we discuss the design of traps toward the implementation of large scale systems. We introduce the basic design of a surface-electrode ion trap with embedded microwave conductors. The oscillating magnetic field required to perform the operations is generated by a single optimized conductor. We discuss the simulation and characterization of the magnetic field pattern, which is fixed by the microwave conductor design. In addition, we demonstrate the capability to simulate, fabricate and characterize a multilayer surface ion trap. Multilayer traps are a key aspect for scalability since they are necessary to achieve large system sizes, with many `ion registers', where the registers are interconnected by physically transporting ions between them. In the second part of this thesis we demonstrate the implementation of a two-qubit entangling gate and we explore the possibilities offered by quantum control methods to improve its fidelity. We perform an entangling gate on two 9Be+ ions and measure a Bell state fidelity of 98.2(1.2)%. Error characterization shows that the gate result is limited by technical issues connected to the ions' motional states. To reduce these errors we apply amplitude modulation of the gate microwave drive. After stabilization of the ions' radial modes, we obtain an amplitude modulated gate with infidelity in the 10^-3 range. The result is confirmed by analyzing the data using three different methods. Using additional dynamic decoupling techniques, these results could bring microwave near-field gates past the fault-tolerance threshold.
Abstract We demonstrate the experimental realization of a two-qubit Mølmer–Sørensen gate on a magnetic field-insensitive hyperfine transition in 9 Be + ions using microwave near-fields emitted by a single microwave conductor embedded in a surface-electrode ion trap. The design of the conductor was optimized to produce a high oscillating magnetic field gradient at the ion position. The measured gate fidelity is determined to be 98.2 ± 1.2% and is limited by technical imperfections, as is confirmed by a comprehensive numerical error analysis. The conductor design can potentially simplify the implementation of multi-qubit gates and represents a self-contained, scalable module for entangling gates within the quantum CCD architecture for an ion-trap quantum computer.
The major challenges in trapped-ion quantum computation are to scale up few-ion experiments to many qubits and to improve control techniques so that quantum logic gates can be carried out with higher fidelities. This thesis reports experimental progress in both of these areas. In the early part of the thesis we describe the fabrication of a surface-electrode ion trap, the development of the apparatus and techniques required to operate it and the successful trapping of 40Ca+ ions. Notably we developed methods to control the orientation of the principal axes and to minimise ion micromotion. We propose a repumping scheme that simplifies heating rate measurements for ions with low-lying D levels, and use it to characterise the electric field noise in the trap. Surface-electrode traps are important because they offer a route to dense integration of electronic and optical control elements using existing microfabrication technology. We explore this scaling route by testing a series of three traps that were microfabricated at Sandia National Laboratories. Investigations of micromotion and charging of the surface by laser beams were carried out and improvements to future traps are suggested. Using one of these traps we also investigated anomalous electrical noise from the electrode surfaces and discovered that it can be reduced by cleaning with a pulsed laser. A factor of two decrease was observed; this represents the first in situ removal of this noise source, an important step towards higher gate fidelities. In the second half of the thesis we describe the design and construction of an experiment for the purpose of replacing laser-driven multi-qubit quantum logic gates with microwave-driven ones. We investigate magnetic-field-independent hyperfine qubits in 40Ca+ as suitable qubits for this scheme. We make a design study of how best to integrate an ion trap with the microwave conductors required to implement the gate and propose a novel integrated resonant structure. The trap was fabricated and ions were successfully loaded. Single-qubit experiments show that the microwave fields above the trap are in excellent agreement with software simulations. There are good prospects for demonstrating a multi-qubit gate in the near future. We conclude by discussing the possibilities for larger-scale quantum computation by combining microfabricated traps and microwave control.
We demonstrate the experimental realization of a two-qubit Mølmer–Sørensen gate on a magnetic field-insensitive hyperfine transition in 9Be+ ions using microwave near-fields emitted by a single microwave conductor embedded in a surface-electrode ion trap. The design of the conductor was optimized to produce a high oscillating magnetic field gradient at the ion position. The measured gate fidelity is determined to be 98.2 ± 1.2% and is limited by technical imperfections, as is confirmed by a comprehensive numerical error analysis. The conductor design can potentially simplify the implementation of multi-qubit gates and represents a self-contained, scalable module for entangling gates within the quantum CCD architecture for an ion-trap quantum computer.
Quantum computers offer great potential for significant speedup in executing certain algorithms compared to their classical counterparts. One of the most promising physical systems in which implementing such a device seems viable are trapped atomic ions. All of the fundamental operations needed for quantum information processing have already been experimentally demonstrated in trapped ion systems. Today, the remaining two obstacles are to improve the fidelities of these operations up to the point where quantum error correction techniques can be successfully applied, as well as to scale up the present systems to a higher number of quantum bits (qubits). This thesis addresses both issues. On the one hand, it decribes the experimental implementation of a high-fidelity two-qubit quantum logic gate, which is the most technically demanding fundamental operation to realise in practice. On the other hand, the presented work is carried out in a microfabricated surface ion trap – an architecture that holds the promise of scalability. The gate is applied directly to hyperfine "atomic clock" qubits in 43Ca+ ions using the near-field microwave magnetic field gradient produced by an integrated trap electrode. To protect the gate against fluctuating energy shifts of the qubit states, as well as to avoid the need to null the microwave field at the position of the ions, a dynamically decoupled Mølmer-Sørensen scheme is employed. After accounting for state preparation and measurement errors, the achieved gate fidelity is 99.7(1)%. In previous work, the same apparatus has been used to demonstrate coherence times of T*2 ≈ 50 s and all single-qubit operations with fidelity > 99.95%. To gain access to the "atomic clock" qubit transition in 43Ca+, a static magnetic field of 146G is applied. The resulting energy level Zeeman-structure is spread over many times the linewidth of the atomic transition used for Doppler cooling. This thesis presents a simple and robust method for Doppler cooling and obtaining high fluorescence from this qubit in spite of the complicated level structure. A temperature of 0.3mK, slightly below the Doppler limit, is reached.
Microwave-driven quantum logic gates in trapped-ion systems offer a scalable and laser-free alternative to optical control, with the potential for robust integration into surface-electrode trap architectures. In this work, we present a systematic design guideline for planar ion traps optimized for fast two-qubit microwave gates using chip-integrated conductors. We investigate two electrode configurations, one employing a single microwave line for driving σ transitions, and another with two symmetric lines for π transitions. Through finite-element simulations, we analyze ion height, magnetic field gradients, heating effects, and gate durations under realistic cryogenic conditions. Our results show that both configurations can achieve two-qubit gate times in the order of 10 μs for Be+9 and Ca+40 ions.