Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Letters

Photothermal tuning and stabilization of a photonic crystal nanofiber cavity

王杰 Wang Jie, K. P. Nayak, Jameesh Keloth

Published Aug 7, 2019• 6 citations
Publisher

Abstract

We report the photothermal properties of a photonic crystal nanofiber (PhCN) cavity, which is fabricated using a femtosecond laser ablation technique, under ultra-high vacuum conditions. The results show that by launching a non-resonant guided light, the stopband of the PhCN, along with the cavity modes, can be tuned at a rate of 250 GHz (∼0.5 nm)/mW. Moreover, due to the thermal self-locking effect of a resonant light, a cavity mode with a finesse of 25 can be tuned over a few free spectral ranges using only a few μW of guided light. As an enabling step, we demonstrate a dual-mode locking scheme to thermally stabilize a cavity mode to the atomic line for single atom-based cavity quantum electrodynamics experiments.

DOI
10.1364/ol.44.003996

Related papers

Fabrication of a centimeter-long cavity on a nanofiber for cavity quantum electrodynamics

Jameesh Keloth, K. P. Nayak, K. Hakuta

We report the fabrication of a 1.2 cm long cavity directly on a nanofiber using femtosecond laser ablation. The cavity modes with finesse values in the range of 200-400 can enable the "strong-coupling" regime of cavity QED, with high cooperativity of 10-20, for a single atom trapped 200 nm away from the fiber surface [Phys. Rev. A80, 053826 (2009)PLRAAN1050-294710.1103/PhysRevA.80.053826]. Such cavity modes can still maintain the transmission between 40%-60%, suggesting a one-pass intracavity transmission of 99.53%. Other cavity modes, which can enable cooperativity in the range of 3-10, show transmission over 60%-85% and are suitable for fiber-based single-photon sources and quantum nonlinear optics in the "Purcell" regime.

arXiv:1701.06719•Optics Letters•Feb 24, 2017•38 citations

Real-Time Observation of Single Atoms Trapped and Interfaced to a Nanofiber Cavity

K. P. Nayak, 王杰 Wang Jie, Jameesh Keloth

We demonstrate efficient interfacing of individually trapped single atoms to a nanofiber cavity. The cavity is formed by fabricating photonic crystal structures directly on the nanofiber using femtosecond laser ablation. The single atoms are interfaced to the nanofiber cavity using an optical tweezer based side-illumination trapping scheme. We show that the fluorescence of individual single atoms trapped on the nanofiber cavity can be readily observed in real-time through the fiber guided modes. From the photon statistics measured for different cavity decay rates, the effective coupling rate of the atom-cavity interface is estimated to be 34±2 MHz. This yields a cooperativity of 5.4±0.6 (Purcell factor=6.4±0.6) and a cavity enhanced channeling efficiency as high as 85±2% for a cavity mode with a finesse of 140. The trap lifetime is measured to be 52±5 ms. These results may open new possibilities for deterministic preparation of single atom events for quantum photonics applications on an all-fiber platform.

arXiv:1908.03319•Physical Review Letters•Nov 19, 2019•57 citations

Cavity Quantum Electrodynamics on a Nanofiber Using a Composite Photonic Crystal Cavity

Ramachandrarao Yalla, Mark Sadgrove, K. P. Nayak +1 more

We demonstrate cavity QED conditions in the Purcell regime for single quantum emitters on the surface of an optical nanofiber. The cavity is formed by combining an optical nanofiber and a nanofabricated grating to create a composite photonic crystal cavity. By using this technique, significant enhancement of the spontaneous emission rate into the nanofiber guided modes is observed for single quantum dots. Our results pave the way for enhanced on-fiber light-matter interfaces with clear applications to quantum networks.

arXiv:1409.3298•Physical Review Letters•Sep 29, 2014•153 citations

Fabrication of a centimeter-long cavity on nanofibe for strong-coupling regime of cavity QED

Jameesh Keloth, K. P. Nayak, 王杰 Wang Jie +1 more

We report the fabrication of a centimeter-long cavity directly on the nanofibe using femtosecond laser ablation. The cavity can operate in both “strong-coupling” and “Purcell” regime of cavity QED with moderate finesse high cooperativity and high transmission. The high optical quality of the cavity modes show promising avenues for fibe-based quantum interface and single photon sources.

IEEE Photonics Conference•Oct 1, 2017•0 citations

Photoabsorption of Few Atoms Using Photonic Crystal Cavity Based on Nanofiber

Pengfei Zhang, Jameesh Keloth, K. P. Nayak +1 more

We demonstrate enhanced light-matter interaction in nanofiber based photonic crystal cavity. We show the absorption of the guided mode can be enhanced up to 53% for an average atom number of 4.7 around nanofiber cavity.

Asia Communications and Photonics Conference•Jan 1, 2014•0 citations

Geometry-driven tunable single-photon coupling into an optical nanofiber cavity

Subrat Sahu, Rajan Jha

We propose a geometry-driven strategy for achieving tunable single-photon coupling in an optical nanofiber cavity (ONFC), where the resonance wavelength is controlled by tailoring the optical nanofiber (ONF) diameter and the grating pitch. By adjusting these structural parameters, the cavity response can be systematically tuned without modifying the material platform or by using any external control schemes. There is a wide spectral resonance wavelength variation of 60, 106, and 70 nm that can be achieved by varying the ONF diameter in the range of 150 nm, the grating pitch of 60 nm, and the elongation of 400 µm, respectively. The integration of a quantum emitter (QE) within the cavity region retains the geometry-dependent tunability of the system. This enables controlled spectral alignment between the QE emission wavelength and the cavity resonance. For a typical QE placed on the ONFC operating around 640 nm, it facilitates a strong spontaneous emission enhancement with a Purcell factor of ∼20 and a coupling efficiency of ∼94% into the ONF-guided mode. The scattering-limited cavity performance yields a quality factor, finesse, and one-pass power loss of 2930, 104, and 2.9%. Owing to its geometry-controlled design, the proposed device can be readily adapted to different QE wavelengths through appropriate structural optimization, offering a compact and fiber-integrated platform for quantum information and communication applications.

Journal of the Optical Society of America B•May 20, 2026•2 citations
We report the photothermal properties of a photonic crystal nanofiber (PhCN) cavity, which is fabricated using a femtosecond laser ablation technique, under ultra-high vacuum conditions. The results show that by launching a non-resonant guided light, the stopband of the PhCN, along with the cavity modes, can be tuned at a rate of 250 GHz (∼0.5 nm)/mW. Moreover, due to the thermal self-locking effect of a resonant light, a cavity mode with a finesse of 25 can be tuned over a few free spectral ranges using only a few μW of guided light. As an enabling step, we demonstrate a dual-mode locking scheme to thermally stabilize a cavity mode to the atomic line for single atom-based cavity quantum electrodynamics experiments.
We report the fabrication of a 1.2 cm long cavity directly on a nanofiber using femtosecond laser ablation. The cavity modes with finesse values in the range of 200-400 can enable the "strong-coupling" regime of cavity QED, with high cooperativity of 10-20, for a single atom trapped 200 nm away from the fiber surface [Phys. Rev. A80, 053826 (2009)PLRAAN1050-294710.1103/PhysRevA.80.053826]. Such cavity modes can still maintain the transmission between 40%-60%, suggesting a one-pass intracavity transmission of 99.53%. Other cavity modes, which can enable cooperativity in the range of 3-10, show transmission over 60%-85% and are suitable for fiber-based single-photon sources and quantum nonlinear optics in the "Purcell" regime.
We demonstrate efficient interfacing of individually trapped single atoms to a nanofiber cavity. The cavity is formed by fabricating photonic crystal structures directly on the nanofiber using femtosecond laser ablation. The single atoms are interfaced to the nanofiber cavity using an optical tweezer based side-illumination trapping scheme. We show that the fluorescence of individual single atoms trapped on the nanofiber cavity can be readily observed in real-time through the fiber guided modes. From the photon statistics measured for different cavity decay rates, the effective coupling rate of the atom-cavity interface is estimated to be 34±2 MHz. This yields a cooperativity of 5.4±0.6 (Purcell factor=6.4±0.6) and a cavity enhanced channeling efficiency as high as 85±2% for a cavity mode with a finesse of 140. The trap lifetime is measured to be 52±5 ms. These results may open new possibilities for deterministic preparation of single atom events for quantum photonics applications on an all-fiber platform.
We demonstrate cavity QED conditions in the Purcell regime for single quantum emitters on the surface of an optical nanofiber. The cavity is formed by combining an optical nanofiber and a nanofabricated grating to create a composite photonic crystal cavity. By using this technique, significant enhancement of the spontaneous emission rate into the nanofiber guided modes is observed for single quantum dots. Our results pave the way for enhanced on-fiber light-matter interfaces with clear applications to quantum networks.
We propose a geometry-driven strategy for achieving tunable single-photon coupling in an optical nanofiber cavity (ONFC), where the resonance wavelength is controlled by tailoring the optical nanofiber (ONF) diameter and the grating pitch. By adjusting these structural parameters, the cavity response can be systematically tuned without modifying the material platform or by using any external control schemes. There is a wide spectral resonance wavelength variation of 60, 106, and 70 nm that can be achieved by varying the ONF diameter in the range of 150 nm, the grating pitch of 60 nm, and the elongation of 400 µm, respectively. The integration of a quantum emitter (QE) within the cavity region retains the geometry-dependent tunability of the system. This enables controlled spectral alignment between the QE emission wavelength and the cavity resonance. For a typical QE placed on the ONFC operating around 640 nm, it facilitates a strong spontaneous emission enhancement with a Purcell factor of ∼20 and a coupling efficiency of ∼94% into the ONF-guided mode. The scattering-limited cavity performance yields a quality factor, finesse, and one-pass power loss of 2930, 104, and 2.9%. Owing to its geometry-controlled design, the proposed device can be readily adapted to different QE wavelengths through appropriate structural optimization, offering a compact and fiber-integrated platform for quantum information and communication applications.