Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Cavity enhanced Raman heterodyne spectroscopy in Er3+: Y2SiO5 for microwave to optical signal conversion

Xavier Fernandez-Gonzalvo, Sebastian P. Horvath, Yuhui Chen, Jevon J. Longdell

Published Jan 1, 2018• 6 citations
Publisher

Abstract

The efficiency of the frequency conversion process at the heart of Raman heterodyne spectroscopy was improved by nearly four orders of magnitude by resonant enhancement of both the pump and signal optical fields. Our results using an erbium doped Y2SiO5 crystal at temperatures near 4 K suggest that such an approach is promising for the quantum conversion of microwave to optical photons.

DOI
10.1364/cleopr.2018.tu2g.2

Related papers

Cavity-enhanced Raman heterodyne spectroscopy in Er 3 + : Y 2 SiO 5 for microwave to optical signal conversion

Xavier Fernandez-Gonzalvo, Sebastian P. Horvath, Yuhui Chen +1 more

The efficiency of the frequency conversion process at the heart of Raman heterodyne spectroscopy was improved by nearly four orders of magnitude by resonant enhancement of both the pump and signal optical fields. Our results using an erbium-doped ${\mathrm{Y}}_{2}{\mathrm{SiO}}_{5}$ crystal embedded in a microwave and an optical cavity at temperatures near 4 K suggest that such an approach is promising for the quantum conversion of microwave to optical photons.

arXiv:1712.07735•Physical Review A•Sep 9, 2019•68 citations

Coherent frequency up-conversion of microwaves to the optical telecommunications band in an Er:YSO crystal

Xavier Fernandez-Gonzalvo, Yu‐Hui Chen, Chunming Yin +2 more

The ability to convert quantum states from microwave photons to optical photons is important for hybrid system approaches to quantum information processing. We report the up-conversion of a microwave signal into the optical telecommunications wavelength band using erbium dopants in a yttrium orthosilicate crystal via stimulated Raman scattering. The microwaves were applied to the sample using a three-dimensional copper loop-gap resonator and the coupling and signal optical fields were single passed. The conversion efficiency was low, in agreement with a theoretical analysis, but can be significantly enhanced with an optical resonator.

arXiv:1501.02014•Physical Review A•Dec 8, 2015•111 citations

Probing strong coupling between a microwave cavity and a spin ensemble with Raman heterodyne spectroscopy

Gavin G. G. King, Peter S. Barnett, John G. Bartholomew +2 more

Rare-earth ions in solids are under active investigation for quantum microwave-optical signal converters. Here, light passed through an Er:YSO crystal sitting in a driven microwave resonator develops modulation due to three-wave mixing in the erbium dopants. Strong coupling between the microwave cavity and the spins causes modulation when the microwaves are resonant with the spin-cavity polaritons rather than the spins. This work extends the rare-earth microwave-optical conversion to both millikelvin temperatures and isotopically pure dopants.

arXiv:2105.05387•Physical review. B./Physical review. B•Jun 14, 2021•11 citations

Coherent Frequency Conversion from Microwave to Optical Fields in an Erbium Doped Y2SiO5 Crystal: Towards the Single Photon Regime

Xavier Fernandez-Gonzalvo

In the context of quantum information technologies superconducting qubits (SQs) are very attractive devices for the manipulation of quantum states, and present themselves as one of our best candidates to build a quantum processor. They couple naturally to microwave photons, for which suitable quantum memories or a long distance propagation channel don’t exist. A way around these limitations is to turn these microwave photons into optical ones by building a quantum frequency converter: a device by which the frequency of a photon can be changed while preserving its non-classical correlations. Then, optical fibres could be used to link distant SQ-based devices together, facilitating the creation of a network of quantum computers. Moreover, SQs could then be coupled to quantum memories compatible with photons at optical frequencies, which are the most well developed kind of quantum memories at the present time. This thesis explores the possibility to convert single microwave photons into optical photons using erbium doped in a yttrium orthosilicate crystal (Er3+:Y2SiO5). Er3+:Y2SiO5 is a good candidate because it has a naturally occurring optical transition near 1536 nm close to the point where silica optical fibres show their minimum loss. A microwave transition can be found in two different ways: one way is to use the 167 isotope of erbium, which is the only stable isotope that shows hyperfine splitting as it has non-zero nuclear spin. The hyperfine structure of the ground state of 167Er3+:Y2SiO5 spans over about 5 GHz. The other possibility is to use the other stable isotopes of erbium and Zeeman split their ground state using an external magnetic field. A microwave transition near 5 GHz can be achieved with moderate magnetic fields due to the high 𝑔-factors of Er3+:Y2SiO5. The physical process of interest is a three wave mixing process involving two fields at optical frequencies and one field at microwave frequencies. In order to boost the efficiency of the frequency conversion process the Er3+:Y2SiO5 crystal is placed inside a microwave and an optical resonator. The problem is first explored from the theoretical point of view, where a nonlinear coefficient Λ(2) is derived (analogous to the 𝜒(2) often used in nonlinear optics), and the interaction between cavity modes and the nonlinear medium is studied. It is predicted that with a sample cooled down to millikelvin temperatures total frequency conversion between microwave and optical fields can be achieved. A preliminary hole burning spectroscopy experiment is performed with the objective of reconstructing the hyperfine structure of the excited state of 167Er3+:Y2SiO5, but the complexity of the problem makes it too difficult to achieve this goal. Then a series of experiments are shown, aimed at determining whether or not frequency conversion at the single photon level is achievable using the even isotopes of erbium in a magnetic field. These experiments are based in the Raman heterodyne spectroscopy technique, which is used in combination with electron paramagnetic resonance and optical absorption spectroscopy. In all experiments the sample is cooled down to cryogenic temperatures near 4 K. A first experiment shows that the frequency conversion process exists in Er3+:Y2SiO5, in a setup where only a microwave resonator is used, but not an optical one. A second experiment is performed in a similar setup, this time presenting a quantitative study of the properties of the frequency conversion process, and its comparison with the theoretical model previously derived. A third experiment is performed, which incorporates an optical cavity to the system. The interaction between the erbium ions and the optical cavity introduces a whole new range of experimental complications, which are studied and discussed. Then, the frequency conversion signal is studied anew, showing an unexpected highly non-linear scaling behaviour with the input powers. A hypothesis explaining this unexpected behaviour is given, referring to stray optical absorption in the inhomogeneous line of Er3+:Y2SiO5 (and in particular 167Er3+:Y2SiO5), which can be bleached out under certain circumstances due to spectral hole burning effects. The overall maximum frequency conversion efficiency observed is of 3 × 10^−4 per Watt of pump laser power. While this value is still far from the target several ways of improvement are proposed, including cooling down the system to millikelvin temperatures, increasing the dopant concentration and modifying the geometry of the resonators.

•Jan 1, 2017•1 citation

Theory of Microwave to Optical Photon Upconversion Using Erbium Doped Crystals

Peter S. Barnett

The subject of this thesis is coherent conversion from microwave photons to optical photons. This has applications for quantum computing, and would allow interfacing between superconducting qubits and optical fibres. Specifically, we will focus on photon conversion via erbium ions in a doped crystal. \n\nWe model a device which has an erbium doped crystal inside overlapping microwave and optical cavities. Input microwave photons are combined with photons from an optical pump laser via interactions with the erbium ions. This will produce optical output photons carrying the same quantum information as the input microwave photons. We develop a description of the interaction between the atoms and the light fields, accounting for both loss effects in the single atoms, and inhomogeneous broadening of the ensemble. Our theory is compared with experimental data, and shows good agreement. \n \nWe explore various phenomena which arise in this system, including the effects of temperature and microwave power. \n\nIt is shown that the description of this device from earlier work is not valid in the regime where the conversion efficiency is greatest. Hence, this work is necessary to be able to predict the maximum conversion efficiency. \n\nWe develop a linearised model which is accurate in the regime where the microwave and optical fields are small, such as the regime used for quantum information. This model is used to maximise the photon number conversion efficiency of the device. We predict conversion efficiencies above 20%, far higher than has been achieved experimentally with using rare earth ions. Modifying our device should further increase the conversion efficiency to above 80%.

•Jan 1, 2020•1 citation

All-Dielectric Resonant Cavity Electro-Optic Transduction Between Microwave and Telecom

Mihir Khanna, Yang Hu, Thomas P. Purdy

We present a resonant electro-optic transducer for efficient conversion between microwave and telecom wavelength photons. Our platform employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry - Perot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon number conversion efficiency at the percent level, comparable to state-of-the-art devices at room temperature -- sufficient to resolve the thermal occupation of the microwave mode -- while avoiding the noise and loss associated with metal electrodes. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave - optical quantum transduction.

quant-pharXiv:2601.13199•Jan 20, 2026•0 citations
The efficiency of the frequency conversion process at the heart of Raman heterodyne spectroscopy was improved by nearly four orders of magnitude by resonant enhancement of both the pump and signal optical fields. Our results using an erbium doped Y2SiO5 crystal at temperatures near 4 K suggest that such an approach is promising for the quantum conversion of microwave to optical photons.
The efficiency of the frequency conversion process at the heart of Raman heterodyne spectroscopy was improved by nearly four orders of magnitude by resonant enhancement of both the pump and signal optical fields. Our results using an erbium-doped Y2SiO5{\mathrm{Y}}_{2}{\mathrm{SiO}}_{5}Y2​SiO5​ crystal embedded in a microwave and an optical cavity at temperatures near 4 K suggest that such an approach is promising for the quantum conversion of microwave to optical photons.
The ability to convert quantum states from microwave photons to optical photons is important for hybrid system approaches to quantum information processing. We report the up-conversion of a microwave signal into the optical telecommunications wavelength band using erbium dopants in a yttrium orthosilicate crystal via stimulated Raman scattering. The microwaves were applied to the sample using a three-dimensional copper loop-gap resonator and the coupling and signal optical fields were single passed. The conversion efficiency was low, in agreement with a theoretical analysis, but can be significantly enhanced with an optical resonator.
Rare-earth ions in solids are under active investigation for quantum microwave-optical signal converters. Here, light passed through an Er:YSO crystal sitting in a driven microwave resonator develops modulation due to three-wave mixing in the erbium dopants. Strong coupling between the microwave cavity and the spins causes modulation when the microwaves are resonant with the spin-cavity polaritons rather than the spins. This work extends the rare-earth microwave-optical conversion to both millikelvin temperatures and isotopically pure dopants.
In the context of quantum information technologies superconducting qubits (SQs) are very attractive devices for the manipulation of quantum states, and present themselves as one of our best candidates to build a quantum processor. They couple naturally to microwave photons, for which suitable quantum memories or a long distance propagation channel don’t exist. A way around these limitations is to turn these microwave photons into optical ones by building a quantum frequency converter: a device by which the frequency of a photon can be changed while preserving its non-classical correlations. Then, optical fibres could be used to link distant SQ-based devices together, facilitating the creation of a network of quantum computers. Moreover, SQs could then be coupled to quantum memories compatible with photons at optical frequencies, which are the most well developed kind of quantum memories at the present time. This thesis explores the possibility to convert single microwave photons into optical photons using erbium doped in a yttrium orthosilicate crystal (Er3+:Y2SiO5). Er3+:Y2SiO5 is a good candidate because it has a naturally occurring optical transition near 1536 nm close to the point where silica optical fibres show their minimum loss. A microwave transition can be found in two different ways: one way is to use the 167 isotope of erbium, which is the only stable isotope that shows hyperfine splitting as it has non-zero nuclear spin. The hyperfine structure of the ground state of 167Er3+:Y2SiO5 spans over about 5 GHz. The other possibility is to use the other stable isotopes of erbium and Zeeman split their ground state using an external magnetic field. A microwave transition near 5 GHz can be achieved with moderate magnetic fields due to the high 𝑔-factors of Er3+:Y2SiO5. The physical process of interest is a three wave mixing process involving two fields at optical frequencies and one field at microwave frequencies. In order to boost the efficiency of the frequency conversion process the Er3+:Y2SiO5 crystal is placed inside a microwave and an optical resonator. The problem is first explored from the theoretical point of view, where a nonlinear coefficient Λ(2) is derived (analogous to the 𝜒(2) often used in nonlinear optics), and the interaction between cavity modes and the nonlinear medium is studied. It is predicted that with a sample cooled down to millikelvin temperatures total frequency conversion between microwave and optical fields can be achieved. A preliminary hole burning spectroscopy experiment is performed with the objective of reconstructing the hyperfine structure of the excited state of 167Er3+:Y2SiO5, but the complexity of the problem makes it too difficult to achieve this goal. Then a series of experiments are shown, aimed at determining whether or not frequency conversion at the single photon level is achievable using the even isotopes of erbium in a magnetic field. These experiments are based in the Raman heterodyne spectroscopy technique, which is used in combination with electron paramagnetic resonance and optical absorption spectroscopy. In all experiments the sample is cooled down to cryogenic temperatures near 4 K. A first experiment shows that the frequency conversion process exists in Er3+:Y2SiO5, in a setup where only a microwave resonator is used, but not an optical one. A second experiment is performed in a similar setup, this time presenting a quantitative study of the properties of the frequency conversion process, and its comparison with the theoretical model previously derived. A third experiment is performed, which incorporates an optical cavity to the system. The interaction between the erbium ions and the optical cavity introduces a whole new range of experimental complications, which are studied and discussed. Then, the frequency conversion signal is studied anew, showing an unexpected highly non-linear scaling behaviour with the input powers. A hypothesis explaining this unexpected behaviour is given, referring to stray optical absorption in the inhomogeneous line of Er3+:Y2SiO5 (and in particular 167Er3+:Y2SiO5), which can be bleached out under certain circumstances due to spectral hole burning effects. The overall maximum frequency conversion efficiency observed is of 3 × 10^−4 per Watt of pump laser power. While this value is still far from the target several ways of improvement are proposed, including cooling down the system to millikelvin temperatures, increasing the dopant concentration and modifying the geometry of the resonators.
The subject of this thesis is coherent conversion from microwave photons to optical photons. This has applications for quantum computing, and would allow interfacing between superconducting qubits and optical fibres. Specifically, we will focus on photon conversion via erbium ions in a doped crystal. \n\nWe model a device which has an erbium doped crystal inside overlapping microwave and optical cavities. Input microwave photons are combined with photons from an optical pump laser via interactions with the erbium ions. This will produce optical output photons carrying the same quantum information as the input microwave photons. We develop a description of the interaction between the atoms and the light fields, accounting for both loss effects in the single atoms, and inhomogeneous broadening of the ensemble. Our theory is compared with experimental data, and shows good agreement. \n \nWe explore various phenomena which arise in this system, including the effects of temperature and microwave power. \n\nIt is shown that the description of this device from earlier work is not valid in the regime where the conversion efficiency is greatest. Hence, this work is necessary to be able to predict the maximum conversion efficiency. \n\nWe develop a linearised model which is accurate in the regime where the microwave and optical fields are small, such as the regime used for quantum information. This model is used to maximise the photon number conversion efficiency of the device. We predict conversion efficiencies above 20%, far higher than has been achieved experimentally with using rare earth ions. Modifying our device should further increase the conversion efficiency to above 80%.
We present a resonant electro-optic transducer for efficient conversion between microwave and telecom wavelength photons. Our platform employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry - Perot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon number conversion efficiency at the percent level, comparable to state-of-the-art devices at room temperature -- sufficient to resolve the thermal occupation of the microwave mode -- while avoiding the noise and loss associated with metal electrodes. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave - optical quantum transduction.