Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEICE Transactions on Electronics

Rapid Single-Flux-Quantum Truncated Multiplier Based on Bit-Level Processing

Nobutaka Kito, Ryota ODAKA, Kazuyoshi Takagi

Published Jun 30, 2019• 4 citations
Publisher

Abstract

A rapid single-flux-quantum (RSFQ) truncated multiplier based on bit-level processing is proposed. In the multiplier, two operands are transformed to two serialized patterns of bits (pulses), and the multiplication is carried out by processing those bits. The result is obtained by counting bits. By calculating in bit-level, the proposed multiplier can be implemented in small area. The gate level design of the multiplier is shown. The layout of the 4-bit multiplier was also designed.

DOI
10.1587/transele.2018ecs6014

Related papers

RSFQ 4-bit Bit-Slice Integer Multiplier

Guang-Ming Tang, Kazuyoshi Takagi, Naofumi Takagi

A rapid single-flux-quantum (RSFQ) 4-bit bit-slice multiplier is proposed. A new systolic-like multiplication algorithm suitable for RSFQ implementation is developed. The multiplier is designed using the cell library for AIST 10-kA/cm2 1.0-μm fabrication technology (ADP2). Concurrent flow clocking is used to design a fully pipelined RSFQ logic design. A 4n x 4n-bit multiplier consists of 2n + 17 stages. For verifying the algorithm and the logic design, a physical layout of the 8 x 8-bit multiplier has been designed with target operating frequency of 50 GHz and simulated. It consists of 21 stages and 11, 488 Josephson junctions. The simulation results show correct operation up to 62.5 GHz.

IEICE Transactions on Electronics•Jan 1, 2016•12 citations

Design of 8-Bit RSFQ Based Multiplier for DSP Application

N. Kamakshamma, P. Kullaya Swamy

Abstract: We have developed and experimentally evaluated at high-speed, a complete set of arithmetic circuits (multiply, add, and accumulate) for high performance digital signal processing (DSP). These circuits take advantage of the unique features of the Rapid Single-Flux Quantum (RSFQ) logic/memory family, including fusion of logic and memory functions at the gate level, pulse representation of clock and data, and the ability to maintain inter cell propagation delays using Josephson transmission lines (JTLs). The circuits developed have been successfully used in the implementation of a serial radix 2 butterfly, a decimation digital filter, and of an arithmetic unit for digital beam forming. The 8×8-bit RSFQ multiplier uses a two- level parallel carry- save reduction tree that significantly reduces the multiplier latency. The 80-GHz carry-save reduction is implemented with asynchronous data-driven wave pipelined [4:2] compressors built with toggle flip-flop cells.

International Journal of Innovative Research in Electronics and Communications•Jan 1, 2015•0 citations

An RSFQ flexible-precision multiplier utilizing bit-level processing

Nobutaka Kito, Kazuyoshi Takagi

Abstract An RSFQ flexible-precision multiplier is proposed. The circuit can perform multiplication with specified bit-width within a predefined bit range. The calculation bit-width can be changed in every operation. When the bit-width of a calculation decreases, the latency in cycles is reduced. The proposed circuit calculates the multiplication result with bit-level processing to save the circuit area. The circuit carries out multiplication by counting pulses on a signal line. An RSFQ flexible-precision matrix multiplication circuit based on the proposed multiplier is also proposed. Its internal multipliers share many component circuits and it is implemented in a compact area.

Journal of Physics Conference Series•Jul 1, 2021•1 citation

A 4-Bit Bit-Slice Multiplier for a 32-Bit RSFQ Microprocessor

Guang-Ming Tang, Kazuyoshi Takagi, Naofumi Takagi

A 4-bit bit-slice multiplier for a 32-bit rapid single-flux-quantum (RSFQ) microprocessor is proposed. It carries out both signed and unsigned integer multiplication. A fully pipelined RSFQ logic design of the multiplier using concurrent flow clocking consists of 33 stages and 17,551 Josephson junctions. The bit-slice approach simplifies the circuit complexity and reduces the hardware cost. For verification, an 8×8-bit 4-bit bit-slice multiplier based on the proposed algorithm has been designed and simulated using AIST 10-kA/cm21.0-μm fabrication technology. The simulation result shows correct operation at 62.5 GHz.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2015•2 citations

RSFQ arithmetic blocks for DSP applications

Stanislav V. Polonsky, J.C. Lin, Alexander V. Rylyakov

We have designed a Rapid Single-Flux-Quantum (RSFQ) bit-serial real-time pipeline multiplier for digital signal processing (DSP) applications. A single-bit module of this multiplier consists of 96 Josephson junctions and uses a B-flip-flop-based carry-save adder (CSA). For HYPRES' standard 1-kA/cm/sup 2/ Nb process with 3.5 /spl mu/m-diameter Josephson junctions the module occupies all area of 350/spl times/600 /spl mu/m/sup 2/. Simulations show that the circuit should dissipate 28 /spl mu/W of power at 2.6 mV dc supply voltage and operate at frequencies of up to 25 GHz. We have successfully tested all cells of the module and verified correct operation of a simplified version of the module at low frequencies. According to numerical simulations, the speed of the multiplier is limited by the CSA. In order to overcome this bottleneck we have developed a concept of a fast carry-save pipeline adder based on XOR gates which uses an RSFQ-specific algorithm for carry bit calculation.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1995•28 citations

32-Bit 4 × 4 Bit-Slice RSFQ Matrix Multiplier

Guang-Ming Tang, Pei-Yao Qu, Xiaochun Ye +2 more

A 32-bit 4 × 4 bit-slice rapid single-flux-quantum (RSFQ) matrix multiplier is proposed. The multiplier mainly consists of bit-slice multipliers and bit-slice adders. The multiplication of unsigned integer matrices is implemented by control signals. The matrix multiplier used synchronous concurrent-flow clocking. The results show that a 16-bit bit-slice processing has the least latency at 10 GHz.

IEEE Transactions on Applied Superconductivity•May 18, 2018•8 citations
A rapid single-flux-quantum (RSFQ) truncated multiplier based on bit-level processing is proposed. In the multiplier, two operands are transformed to two serialized patterns of bits (pulses), and the multiplication is carried out by processing those bits. The result is obtained by counting bits. By calculating in bit-level, the proposed multiplier can be implemented in small area. The gate level design of the multiplier is shown. The layout of the 4-bit multiplier was also designed.
A rapid single-flux-quantum (RSFQ) 4-bit bit-slice multiplier is proposed. A new systolic-like multiplication algorithm suitable for RSFQ implementation is developed. The multiplier is designed using the cell library for AIST 10-kA/cm2 1.0-μm fabrication technology (ADP2). Concurrent flow clocking is used to design a fully pipelined RSFQ logic design. A 4n x 4n-bit multiplier consists of 2n + 17 stages. For verifying the algorithm and the logic design, a physical layout of the 8 x 8-bit multiplier has been designed with target operating frequency of 50 GHz and simulated. It consists of 21 stages and 11, 488 Josephson junctions. The simulation results show correct operation up to 62.5 GHz.
Abstract: We have developed and experimentally evaluated at high-speed, a complete set of arithmetic circuits (multiply, add, and accumulate) for high performance digital signal processing (DSP). These circuits take advantage of the unique features of the Rapid Single-Flux Quantum (RSFQ) logic/memory family, including fusion of logic and memory functions at the gate level, pulse representation of clock and data, and the ability to maintain inter cell propagation delays using Josephson transmission lines (JTLs). The circuits developed have been successfully used in the implementation of a serial radix 2 butterfly, a decimation digital filter, and of an arithmetic unit for digital beam forming. The 8×8-bit RSFQ multiplier uses a two- level parallel carry- save reduction tree that significantly reduces the multiplier latency. The 80-GHz carry-save reduction is implemented with asynchronous data-driven wave pipelined [4:2] compressors built with toggle flip-flop cells.
Abstract An RSFQ flexible-precision multiplier is proposed. The circuit can perform multiplication with specified bit-width within a predefined bit range. The calculation bit-width can be changed in every operation. When the bit-width of a calculation decreases, the latency in cycles is reduced. The proposed circuit calculates the multiplication result with bit-level processing to save the circuit area. The circuit carries out multiplication by counting pulses on a signal line. An RSFQ flexible-precision matrix multiplication circuit based on the proposed multiplier is also proposed. Its internal multipliers share many component circuits and it is implemented in a compact area.
A 4-bit bit-slice multiplier for a 32-bit rapid single-flux-quantum (RSFQ) microprocessor is proposed. It carries out both signed and unsigned integer multiplication. A fully pipelined RSFQ logic design of the multiplier using concurrent flow clocking consists of 33 stages and 17,551 Josephson junctions. The bit-slice approach simplifies the circuit complexity and reduces the hardware cost. For verification, an 8×8-bit 4-bit bit-slice multiplier based on the proposed algorithm has been designed and simulated using AIST 10-kA/cm21.0-μm fabrication technology. The simulation result shows correct operation at 62.5 GHz.
We have designed a Rapid Single-Flux-Quantum (RSFQ) bit-serial real-time pipeline multiplier for digital signal processing (DSP) applications. A single-bit module of this multiplier consists of 96 Josephson junctions and uses a B-flip-flop-based carry-save adder (CSA). For HYPRES' standard 1-kA/cm/sup 2/ Nb process with 3.5 /spl mu/m-diameter Josephson junctions the module occupies all area of 350/spl times/600 /spl mu/m/sup 2/. Simulations show that the circuit should dissipate 28 /spl mu/W of power at 2.6 mV dc supply voltage and operate at frequencies of up to 25 GHz. We have successfully tested all cells of the module and verified correct operation of a simplified version of the module at low frequencies. According to numerical simulations, the speed of the multiplier is limited by the CSA. In order to overcome this bottleneck we have developed a concept of a fast carry-save pipeline adder based on XOR gates which uses an RSFQ-specific algorithm for carry bit calculation.>