Optomechanics has made great strides in theory and experiments over the past decade, which culminated in the first direct detection of gravitational waves in 2015 by LIGO. This thesis explores how optomechanics can be used to test fundamental physics other than the theory of general relativity. Our emphasis will be on falsifiable theories (ultimately, only experiments can decide whether a theory is correct) that address two outstanding issues in quantum mechanics: the measurement problem, and reconciling quantum mechanics with the theory of general relativity. In particular, we show that the space experiment LISA pathfinder places aggressive bounds on two objective collapse models, which are non-linear stochastic modifications of the Schroedinger equation that can resolve the measurement problem. Moreover, we show that state-of-the-art torsion pendulum experiments can test the Schroedinger-Newton theory, which is the non-relativistic limit of a non-linear theory combining quantum mechanics with a fundamentally classical spacetime. Along the way, we propose how to resolve two major difficulties with determining the predictions of non-linear quantum mechanics in an actual experiment. First, we cannot use the density matrix formalism in non-linear quantum mechanics and so we have to suggest and justify a particular ensemble for the thermal bath. Separating out quantum and classical fluctuations helped us propose a reasonable ensemble. Second, most researchers believe that deterministic non-linear quantum mechanics must violate the no-signaling condition. We show this isn't necessarily the case because different interpretations of quantum mechanics make different predictions in non-linear quantum mechanics. We propose an interpretation, the causal-conditional prescription, that doesn't violate causality by noticing that once we fix an initial state, the evolution of a system under many non-linear theories is equivalent to evolution under a linear Hamiltonian with feedback. The mapping allows us to leverage the tools of quantum control, and it tells us that if the non-linear parameters of a non-linear Hamiltonian respond causally (i.e. with an appropriate delay) to measurement results, then the theory can be made causal. We also contribute to the theory of quantum optomechanics. We introduce two new bases that one can view environment modes with. In linear optomechanics a system interacts with an infinite number of bath modes. We show that the interaction can be reduced to one with finite degrees of freedom. Moreover, at any particular time, the system is correlated with only a finite number of bath modes. We show that if we make the assumption that we can measure any commuting environment modes, then this basis allows us to understand the one-shot quantum Cramer-Rao bound in a simple way, and allows us to sweep large parameter regimes and so find promising optomechanics topologies for quantum state preparation tasks that we can then analyze without the assumption of being able to measure any observable of the environment. We also use this basis to show that when we are interested in the conditional dynamics of a test mass, we can only adiabatically eliminate a lossy cavity when we measure the optomechanical system at a slow enough rate. Finally, we develop an analytic filter for obtaining the state of a generic optomechanical system that interacts linearly with its environment and is driven by Gaussian states, and where the outgoing light is measured with a non-linear photon-counting measurement. We hope that our work will help researchers explore optomechanics topologies that make use of photon counters.
Optomechanics has made great strides in theory and experiments over the past decade, which culminated in the first direct detection of gravitational waves in 2015 by LIGO. This thesis explores how optomechanics can be used to test fundamental physics other than the theory of general relativity. Our emphasis will be on falsifiable theories (ultimately, only experiments can decide whether a theory is correct) that address two outstanding issues in quantum mechanics: the measurement problem, and reconciling quantum mechanics with the theory of general relativity. In particular, we show that the space experiment LISA pathfinder places aggressive bounds on two objective collapse models, which are non-linear stochastic modifications of the Schroedinger equation that can resolve the measurement problem. Moreover, we show that state-of-the-art torsion pendulum experiments can test the Schroedinger-Newton theory, which is the non-relativistic limit of a non-linear theory combining quantum mechanics with a fundamentally classical spacetime. Along the way, we propose how to resolve two major difficulties with determining the predictions of non-linear quantum mechanics in an actual experiment. First, we cannot use the density matrix formalism in non-linear quantum mechanics and so we have to suggest and justify a particular ensemble for the thermal bath. Separating out quantum and classical fluctuations helped us propose a reasonable ensemble. Second, most researchers believe that deterministic non-linear quantum mechanics must violate the no-signaling condition. We show this isn't necessarily the case because different interpretations of quantum mechanics make different predictions in non-linear quantum mechanics. We propose an interpretation, the causal-conditional prescription, that doesn't violate causality by noticing that once we fix an initial state, the evolution of a system under many non-linear theories is equivalent to evolution under a linear Hamiltonian with feedback. The mapping allows us to leverage the tools of quantum control, and it tells us that if the non-linear parameters of a non-linear Hamiltonian respond causally (i.e. with an appropriate delay) to measurement results, then the theory can be made causal. We also contribute to the theory of quantum optomechanics. We introduce two new bases that one can view environment modes with. In linear optomechanics a system interacts with an infinite number of bath modes. We show that the interaction can be reduced to one with finite degrees of freedom. Moreover, at any particular time, the system is correlated with only a finite number of bath modes. We show that if we make the assumption that we can measure any commuting environment modes, then this basis allows us to understand the one-shot quantum Cramer-Rao bound in a simple way, and allows us to sweep large parameter regimes and so find promising optomechanics topologies for quantum state preparation tasks that we can then analyze without the assumption of being able to measure any observable of the environment. We also use this basis to show that when we are interested in the conditional dynamics of a test mass, we can only adiabatically eliminate a lossy cavity when we measure the optomechanical system at a slow enough rate. Finally, we develop an analytic filter for obtaining the state of a generic optomechanical system that interacts linearly with its environment and is driven by Gaussian states, and where the outgoing light is measured with a non-linear photon-counting measurement. We hope that our work will help researchers explore optomechanics topologies that make use of photon counters.
We propose an optomechanics experiment that can search for signatures of a fundamentally classical theory of gravity and in particular of the many-body Schr\"odinger-Newton (SN) equation, which governs the evolution of a crystal under a self-gravitational field. The SN equation predicts that the dynamics of a macroscopic mechanical oscillator's center-of-mass wave function differ from the predictions of standard quantum mechanics [H. Yang, H. Miao, D.-S. Lee, B. Helou, and Y. Chen, Phys. Rev. Lett. 110, 170401 (2013)]. This difference is largest for low-frequency oscillators, and for materials, such as tungsten or osmium, with small quantum fluctuations of the constituent atoms around their lattice equilibrium sites. Light probes the motion of these oscillators and is eventually measured in order to extract valuable information on the pendulum's dynamics. Due to the nonlinearity contained in the SN equation, we analyze the fluctuations of measurement results differently than standard quantum mechanics. We revisit how to model a thermal bath, and the wave-function collapse postulate, resulting in two prescriptions for analyzing the quantum measurement of the light. We demonstrate that both predict features, in the outgoing light's phase fluctuations' spectrum, which are separate from classical thermal fluctuations and quantum shot noise, and which can be clearly resolved with state of the art technology.
The extraordinary success of quantum mechanics and its formalism has been established thanks to countless experiments with microscopic systems. Nevertheless, it is still not clear whether and when the quantum world ends, allowing for the emergence of classical phenomena. The extension of quantum properties to macroscopic system gives rise to paradoxes, as the well-known Schrödinger’s cat example. Among the alternatives to quantum mechanics, collapse models propose an objective modification of standard quantum theory to restore macrorealism at large scale. They predict a loss of coherence when scaling towards macroscopic systems, due to a spontaneous collapse mechanism included into the dynamics through non-linear stochastic modifications of the Schrödinger equation. Assessing and characterizing these models is a noteworthy endeavour in the exploration of the quantum-to-classical transition. The overarching goal of this Thesis is to address some of these fundamental issues, by exploring the concept of macrorealism and probing collapse models, making use of optomechanical setups. To answer the question whether a system has a quantum or classical dynamics, we will propose a theoretical test of Leggett-Garg inequalities, as tool to probe the macrorealism of an optomechanical system. We will investigate collapse models through the study of the dynamics of an optomechanical cavity, looking for signatures in the noise spectrum. Further, we will use the hypothesis testing framework and quantum metrology tools to distinguish dynamical channels encoding the presence or the lack of the collapse. Our findings show a violation of Leggett-Garg inequalities, suggesting that the demarcation line of the quantum domain can be pushed further to include larger systems. Our approaches for testing collapse models provide novel methodologies to better discriminate these effects and the results represent another step forward in the attempt of gaining a better understanding of the foundations of physics.
Non-relativistic quantum mechanics have proven to be a significant framework to understand the non-classical behaviour of light and the microcosmos. Perhaps, one of the first technological revolutions within quantum theory came with the invention of the transistor, whereby a purely quantum mechanical description was required. Currently, another outstanding revolution is taking place in a crossroad where information science meets quantum mechanics (this being the quantum information field). Such an area of work contemplates both the fascinating theoretical aspect of quantum correlations, as well as implementations towards quantum tasks performed by a universal quantum computer; tasks that cannot be realised (or they are hard to implement) within the classical domain. This Thesis is devoted to study the dynamics of quantum entanglement in spin-optomechanics systems. In particular, we explore the quantum stabilization of quantum entanglement, a quantum concentration scheme in opto-mechanics and an interfacing of matter and light towards quantum networking applications. Additionally, we also investigate theoretical aspects of quantum correlations within thermal environments, as well as the topical area of quantum sudden transitions. In Chapter 1, we provide a brief summary of quantum information and of the quantum optics framework to cover elementary concepts and techniques used subsequently in this work. Subsequently, in Chapter 2 we present the stabilization of quantum entanglement in a non-linear qubit-oscillator system. The inclusion of a modest nonlinearity gives three results, i) the loss of periodicity of the system, ii) the occurrence of quadrature squeezing appearing for a short time, and iii) the quantum entanglement reaches higher values in contrast to the case without non-linearity. In Chapter 3, a technique to concentrate/distill a two-mode vacuum state in optomechanics via unsharp measurements is presented. Here, one of the optical modes is injected into a cavity at first, and thereafter, it is nonlinearly coupled to a mechanical oscillator. Afterwards, the position of the oscillator is measured using pulsed optomechanics and homodyne detection. The results show that this measurement can conditionally increase the initial entanglement. Next, in Chapter 4, stimulated by optomechanical transducers and quantum networking, a light-matter system is constructed where a qubit is coupled to a cavity mode mediated through a mechanical oscillator. The qubit-oscillator conditionally displaced Hamiltonian and the oscillator-cavity radiation-pressure interaction generate a maximal qubit-cavity entanglement. Additionally, we consider the case in which the cavity mode is coupled to a waveguide, numerical calculations show a promising qubit-fibre entanglement under a weak matter-light coupling. For the quantum network case, we coupled a generic qubit in the first node to a second qubit-cavity distant Jaynes-Cummings system coupled through an optical fibre, where qubit-qubit correlations can be achieved in the quantum open systems scenario. In Chapter 5, we study the evolution of an open quantum system within the Born-Markov microscopic master equation (MME). Essentially, two distant two-level atoms are trapped in fibre-coupled cavities. Under the approximation of one-excitation allowed in the atom-cavity-fibre basis, we can obtain quantum correlations induced by thermal fluctuations from the environments. Lastly, in Chapter 6, we bring together previously elements explored in this Thesis. The system is a hybrid atomic-mechanical system formed from two remote qubits interacting with individual harmonic oscillators. This system, as in Chapter 4, explores interesting applications in quantum networking schemes. The two qubits are initially prepared in a Bell-diagonal state, and consequently the two-qubit correlations exhibit few interesting effects such as freezing, sudden changes and revivals in the evolution of the quantum entropic discord. To conclude, I summarize my findings in Chapter 7.
Cavity optomechanics has become an established and equally promising branch in quantum optics. Thanks to the interaction between matter and electromagnetic radiation, it has proved to be an optimal platform for a range of scopes, from weak force sensing to the study of non-classicality of mechanical motion. Besides, the capability to isolate genuine quantum features of the interaction represents a test ground to address many important questions regarding decoherence, quantum-to-classical transitions and the interface between quantum mechanics and gravity. The first part of the research embedded in this thesis is addressed towards the clear identification and characterisation of quantum features in optomechanics. The main model we will refer to is a deformable Fabry-P\'erot cavity where one of the two mirrors moves under the radiation pressure of light. After having properly assessed the quantum peculiarities of the system, and also having revised some intakes from past literature, we will focus on the study of mechanical non-linearities, as they have been proved to be a key resource to bring out and enhance quantum properties. These investigations provide the basis to eventually propose a method to deterministically prepare and measure macroscopic quantum superposition states of the movable mirror. Such massive quantum states play a key role to inspect the foundations of physics, e.g. to test the collapse of the wave function and phenomenological models of quantum gravity, as well as to develop new enhanced quantum technologies.
Quantum opto-mechanics is a fast moving, broad research field which aims to investigate and control the interaction of light and the quantized motion of mechanical objects and the coupling between them. This allows one to engineer the mechanical quantum state by controlling and measuring the electromagnetic field, and conversely, to control the dynamical evolution of the optical field via its interaction with a mechanical system. Mechanical resonators are accessible in many different shapes and sizes, from kilogram scales in experiments that test gravitational theories to micro- and nano-scales in resolved sideband regime, where the frequency of the mechanical resonator is larger than the bandwidth of the optical cavity. In this regime, it is possible to cool the mechanical object to the ground state which allows a high degree of control and the ability to prepare interesting non-classical states, states that could aid in investigating the quantum dynamics of macroscopic objects. The field of quantum opto-mechanics is a promising testbed for quantum control technologies, such as fundamental tests of quantum mechanics, ultra-sensitive quantum sensors for precise measurements, phonon lasing, mechanical memories with long lifetime and quantum information processing. Furthermore, experiments are progressing toward strong opto-mechanical coupling regimes with single photons. This creates a platform that can take advantage of the nonlinear optical interactions to generate highly non-classical states in such light-matter interfaces. Photonic systems working in the single photon regime will be promising for low power applications and also for implementations of quantum information and computation. Motivated by these applications, this thesis consists of theoretical studies in the context of single photonics. This includes investigating non-classical mechanical state generation and mechanically controlling the dynamical evolution of optical fields in the strong coupling regime single photon opto-mechanics and furthermore, proposing a quantum sensor using single photonics. In this regard, we employ three important formalisms to treat and measure open quantum systems with non-Gaussian input fields: the conditional and unconditional cascaded master equations, Fock-state master equations and input-output Langevin equations. In the context of opto-mechanics, the system to be investigated is composed of two optical cavities with a coupling modulated via a mechanical resonator. In one case, a sequence of single photons are irreversibly sent to one of the optical cavities. After photons go through the opto-mechanical interaction, photon counting measurements are performed on the cavity output, conditionally steering the mechanical state to a highly non-classical Fock state. Numerical calculations are performed to predict the experimental parameters needed to generate a mechanical Fock state before the mechanical object is thermalized. In another case, the same opto-mechanical scheme is employed to conversely modify the state of the optical mode by engineering the state of the mechanical degree of freedom. In this case, it is shown that the opto-mechanical system operates as an effective beam splitter for the input single photons, with a transmission that can be controlled by tuning the number of excitations in the bulk mechanical resonator. When the mechanical resonator has a small coherent amplitude it acts as a quantum control, entangling the optical and mechanical degrees of freedom. As the coherent amplitude of the resonator increases, it acts as a classical control for the input photons. Finally, we propose a novel multi-purpose sensor architecture that can be used for force, refractive index and possibly local temperature detection. In this scheme, two coupled cavities behave as an effective beam splitter. This sensor is based on fourth order interference (the Hong-Ou-Mandel effect) and requires a sequence of single photon pulses and consequently has low pulse power. Changes in the parameter to be measured induce variations in the effective beam splitter reflectivity and result in changes to the visibility of interference. We propose that this generic scheme could be implemented with coupled L3 photonic crystal cavities and find that this system, which only relies on photon coincidence detection and does not need any spectral resolution, can estimate forces as small as 10-7 Newtons and can measure one part per million change in refractive index using a very low input power of 10-10 W.
The field of cavity optomechanics is based on the coupling of optical cavities to mechanical degrees of freedom. Over the past two decades, it has led to remarkable and surprising discoveries. A cavity optomechanical system enabled the first observation of gravitational waves, a discovery awarded with the 2017 Nobel prize, confirming Einstein's 100-year-old prediction. It was also a cavity optomechanical system that has for the first time enabled ground state cooling of the motion of an object containing ~1012 atoms, and entanglement of mechanical oscillators of similar size. Moreover, cavity optomechanical systems have facilitated significant progress in precision-sensing technologies, with diverse applications such as biosensing, magnetometry, and many more.But this may only be the beginning. The field is still in its early days and experimental capabilities are improving fast. For instance, cavity optomechanical systems have the potential to test predicted signatures of quantum gravity such as modifications to the canonical commutator, short-distance modifications to Newtonian gravity, dark matter and dark energy, and even extra dimensions. In this sense, they form an economical platform with a short experimental turnover time, that can compete in its predictive power with mega-scale, multi-billion-dollar experiments such as the Large Hadron Collider.This thesis is dedicated to utilizing cavity optomechanics to explore the maybe most challenging and unexplored frontier in quantum mechanics: The dynamics of macroscopic quantum systems. Quantum physics, since its discovery in the early 20th century, has revolutionized our understanding of the microworld, but has long been thought to apply exclusively to extremely small objects. However, over the past decades, ever-larger quantum systems have emerged in laboratories around the world. On one hand, these are collective, macroscopic quantum phenomena such as superfluidity, superconductivity, and Bose-Einstein condensation. On the other hand, they are quantum states of relatively massive mechanical objects. While our understanding of the interplay of quantum mechanical and classical systems has greatly improved over the past decades, as described by theories of decoherence and open quantum systems, many basic questions about macroscopic quantum systems still remain unanswered. Quantum fluids such as Bose-Einstein condensates and superfluid helium are inherently hard to understand due to their complex dynamics, and difficult to probe experimentally due to the weakness of their interactions with the environment and their fragile nature. This is especially true in the strongly-interacting regime, which is, for instance, found in superfluid helium.Another long-standing, unanswered set of questions in quantum mechanics is related to the quantum measurement problem. What constitutes a quantum measurement? What happens if we engineer a quantum state that is large enough to be, in principle, part of our everyday world? What if we attempt to create a quantum superposition of a living being? Do the laws of physics even permit either of these scenarios?Cavity optomechanics is a unique and powerful platform to investigate macroscopic quantum systems. The extreme sensitivity of cavity optomechanical sensors in readout of mechanical motion makes them susceptible to minute quantum effects. The strong coupling between single photons and phonons in these systems allows engineering and measurement of quantum states of mechanical systems. Furthermore, most cavity optomechanical experiments are cryo-compatible and small in size, which allows integration with other quantum systems to be analyzed, such as superfluid helium.