In this paper we demonstrate a simple and highly sensitive method to characterize the recovery time of efficiency for different kind of superconducting nanowire single- photon detectors. We also describe several applications of these detectors.
One of the key properties of single-photon detectors is their recovery time, i.e., the time required for the detector to recover its nominal efficiency. In the case of superconducting nanowire single-photon detectors (SNSPDs), which can feature extremely short recovery times in free-running mode, a precise characterization of this recovery time and its time dynamics is essential for many quantum optics or quantum communication experiments. We introduce a fast and simple method to characterize precisely the recovery time of SNSPDs. It provides full information about the recovery of the efficiency in time for a single or several consecutive detections. We also show how the method can be used to gain insight into the behavior of the bias current inside the nanowire after a detection, which allows predicting the behavior of the detector and its efficiency in any practical experiment using these detectors.
One of the key properties of single-photon detectors is their recovery time, i.e. the time required for the detector to recover its nominal efficiency. In the case of superconducting nanowire single-photon detectors (SNSPDs), which can feature extremely short recovery times in free-running mode, a precise characterization of this recovery time and its time dynamics is essential for many quantum optics or quantum communication experiments. We introduce a fast and simple method to characterize precisely the recovery time of SNSPDs. It provides full information about the recovery of the efficiency in time for a single or several consecutive detections. We also show how the method can be used to gain insight into the behavior of the bias current inside the nanowire after a detection, which allows predicting the behavior of the detector and its efficiency in any practical experiment using these detectors.
Superconducting nanowire single-photon detectors (SNSPDs) are an attractive technology for applications which benefit from high-count rate photon detection such as quantum communication protocols, photon-starved classical communications, metrology of single-emitters, and photonic quantum computing. However, at high-count rates, a significant portion of photons may be incident during recovery intervals following prior detection events. After detection, the device efficiency recovers over nanoseconds to tens of nanoseconds before reaching a steadystate value. Therefore, for a given SNSPD bias current setpoint, a single efficiency and recovery time specification may not be sufficient to characterize the performance of a device at high count rates. Here we present and experimentally validate a model of the recovery time as a function of bias current for any given system efficiency. These results may be used to improve analysis of measurements performed using SNSPDs operating in the high count rate regime.
The important development of quantum technologies during the past decade brought the need for efficient, fast and precise single-photon detection. Superconducting Nanowire Single-Photon Detectors (SNSPDs) are currently considered as the detection method of choice when extreme performances are required. This thesis aimed at investigating this technology, with the objective of improving existing detectors for high-rate applications in quantum communication. This document presents the work and result achieved over four years dedicated to the subject. During this thesis, single-photon detection based on superconducting nanowire has been investigated, with a particular focus on specific requirements for high speed quantum communication applications. The work achieved ranges from the design and nano-fabrication of the structures, to the characterization and the understanding of the physics, detection models and fundamental limits of the devices.
Photon detectors connect optical and electrical systems by converting light to electrical signals. Single photon detectors detect single photons which measure ultra-weak light. Traditional semiconductor single-photon detectors suffer from high dark count rates, low infrared detection efficiency, and poor temporal resolution. Superconducting-nanowire single-photon detectors (SNSPDs) overcome these limitations using the hotspot effect. SNSPDs have created a solid foundation for optical technologies and become key in quantum information, LiDARs and Deep-Space Communications. This paper reviews working principles and performance metrics: system detection efficiency, dark count rate, recovery time, and timing jitter. The study summarizes applications in quantum information (quantum key distribution, optical quantum computing), single-photon LiDAR, and deep-space optical communication, replacing most single-photon avalanche diodes (SPADs). Recent experiments show that SNSPD-based systems can achieve meter-scale detection of sea fog, interplanetary laser communication over billions of kilometers, and boson sampling with 20 photons. Ongoing research is expected to improve performance in maximum count rate, system integration, and cryogenic operation, as well as to find applications in emerging fields such as environmental monitoring.
Superconducting Nanowire Single Photon Detectors (SNSPDs) excel at a wide variety of performance criteria for single photon counting. They combine unprecedented high detection efficiency, high timing resolution, high count rates, low intrinsic dark count rates, and are sensitive to ultraviolet through mid-infrared single-photons. At JPL, we are working on several projects to push the performance limits of SNSPDs to achieve higher maximum count rates, larger active areas, higher timing resolution, and a wider spectral range. Our recent advances enable new applications for dark matter detection, imaging, and space-to-ground communication and provide insight into the fundamental physics of single-photon detection in superconducting nanowires.