We present alternative method for implementation of secure data transmission channel protected over physical layer for the "first/last mile" segment of intra-corporate network by specialized fiber optic link. Proposed solution is based on application of operating in a few-mode laser-based regime multimode optical fibers with special refractive index profile providing optical pulse strong uniquely distortions due to differential mode delay effect that allows to consider those optical fibers as "encryptor". Therefore, transmitted traffic is strongly distorted and it is unable to be processed without corresponding "decryptor" which might be either also another one optical fiber with "inversed" refractive index profile in relation to the "encryptor"-fiber or electronic dispersion compensator device modified for such application. This work is concerned with configurations of proposed "crypto" fiber optic link as well as brief description of math apparatus for design it. Some results of preliminary simulations are also represented.
We present alternative method for implementation of secure data transmission channel protected over physical layer for the "first/last mile" segment of intra-corporate network by specialized fiber optic link. Proposed solution is based on application of operating in a few-mode laser-based regime multimode optical fibers with special refractive index profile providing optical pulse strong uniquely distortions due to differential mode delay effect that allows to consider those optical fibers as "encryptor". Therefore, transmitted traffic is strongly distorted and it is unable to be processed without corresponding "decryptor" which might be either also another one optical fiber with "inversed" refractive index profile in relation to the "encryptor"-fiber or electronic dispersion compensator device modified for such application. This work is concerned with configurations of proposed "crypto" fiber optic link as well as brief description of math apparatus for design it. Some results of preliminary simulations are also represented.
The light propagation through a multimode fiber is used to increase information security during data transmission without the need for cryptographic approaches. The use of an inverse precoding method in a multimode fiber-optic communication network is based on mode-dependent losses on the physical layer. This leads to an asymmetry between legitimate (Bob) and illegitimate (Eve) recipients of messages, resulting in significant SNR advantage for Bob. In combination with dynamic mode channel changes, there are defined hurdles for Eve to reconstruct a sent message even in a worst-case scenario in which she knows the channel completely. This is the first time that physical layer security has been investigated in a fiber optical network based on measured transmission matrices. The results show that messages can be sent securely using traditional communication techniques. The technology introduced is a step towards the development of cyber physical systems with increased security.
Multimode fibers hold great promise to advance data rates in optical communications but come with the challenge to compensate for modal crosstalk and mode-dependent losses, resulting in strong distortions. The holographic measurement of the transmission matrix enables not only correcting distortions but also harnessing these effects for creating a confidential data connection between legitimate communication parties, Alice and Bob. The feasibility of this physical-layer-security-based approach is demonstrated experimentally for the first time on a multimode fiber link to which the eavesdropper Eve is physically coupled. Once the proper structured light field is launched at Alice's side, the message can be delivered to Bob, and, simultaneously, the decipherment for an illegitimate wiretapper Eve is destroyed. Within a real communication scenario, we implement wiretap codes and demonstrate confidentiality by quantifying the level of secrecy. Compared to an uncoded data transmission, the amount of securely exchanged data is enhanced by a factor of 538. The complex light transportation phenomena that have long been considered limiting and have restricted the widespread use of multimode fiber are exploited for opening new perspectives on information security in spatial multiplexing communication systems.
In telecommunication networks and in computer grid networks, a significant ongoing research is in a technology known as wavelength division multiplexing (WDM), which is capable to transport more than 1 Tbps aggregate traffic over a single fiber. However, when massive amounts of information are transported, as in optical networks, there are three issues that stand, cost-efficient ultra-high bandwidth delivery, security of information and data, and security of the network and of the transporting link layer. In optical networks, each fiber link consists of segments, each several kilometers long. Since a single WDM channel carries traffic, there are opportunities for sophisticated eavesdroppers to tap the fiber, copy a channel, isolate a specific payload and attempt to decrypt it if the encryption key is known or it is breakable with a fast computer. Therefore, end-to-end data security should not only rely on the client's encryption method but also on securing the transmission method on the optical link. In this paper, we present a WDM link security methodology that encrypts multiple channels and with multiple keys to render channel monitoring by eavesdroppers virtually impossible. Although our paper presents the applicability of the method on a point-to-point topology, it is applicable to a multilink and edge-to-edge network path.
The development of communication technology is currently progressing at an extremely rapid pace. One of the most widely applied technologies for data transmission is fiber optic communication, which uses light as the transmission medium. This technology enables data to be transmitted at very high speeds. However, in the process of data transmission, a security mechanism is required to protect information from unauthorized access. Attacks on fiber optic networks can lead to significant alterations in the data received compared to the data sent by the transmitter. This poses a serious risk, particularly when the transmitted data is confidential. Two methods that can be employed to secure fiber optic networks are Optical Steganography and Optical Encryption. The working principle of Optical Steganography involves hiding signals in public channels, while Optical Encryption functions by encrypting the transmitted signals. Both methods can be implemented using OptiSystem software. According to the results of this study, Optical Encryption demonstrates a higher level of reliability compared to Optical Steganography. Optical Encryption achieved a Q-Factor value of 14.65 and a BER of 6.55×10−49. In terms of Q-Factor, Optical Encryption is shown to be 16.3% more effective than Optical Steganography and 90.4% more efficient compared to designs without a security system.
Abstract We propose and study a new technique for securing fibre data communication. The paper presents a method for optical encryption of information transmitted with a traditional fibre link. The encryption method uses a spatial light modulator which converts light pulses representing original data into pseudo-random patterns. A linear combination of light pulses with pseudo-random patterns provides a required encryption performance. The main element of the encryptor is the spatial light modulator which comprises a matrix of cells selectively transmitting or blocking the light beam depending on the pseudo-random configuration of cells. The encrypted information is transmitted through the optical fibre. The decryption process relies on a computational solving of linear program or greedy pursuit. We present a brief description of the method, theoretical analysis and results of numerical simulation. A physical model concept of the method is also presented.
Fiber Optics Communication is also one of the major branch which is widely used in current communication world. Due to several advantages of fiber optics communication over different conventional wired communication method it is having higher priority. Though fiber optic transmits large amount of data quickly over long distance, it is vulnerable to various security attacks. The fiber optic cable can be easily tapped. Fundamental improvements can be achieved for the entire network by increasing the optical network’s performance in terms of channel capacity, data rate, and processing speed. Furthermore, the security of the optical network has an impact on the security of the entire communication system. Optical network security can be effectively protected by fiber-based methods, including all optical signal processing, optical key distribution, optical steganography, and optical chaos-based communication. Fiber-based devices do not radiate an electromagnetic signature and are immune to electromagnetic interference. To provide end to end secure fiber optic communication, a special encryption algorithm based on Advanced Encryption Standard (AES) is employed. The proposed encryption algorithm is simulated and the performance is analyzed. In this paper we are mostly dealing with the basics of fiber optics working principle, priority over other conventional communication system and role of fiber optics communication in computer networking and its vulnerabilities.