Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics

High-efficiency broadband single-photon frequency upconversion

Huiqin Hu, Jianhui Ma, Yu Chen, Xiuliang Chen, Haifeng Pan, E Wu

Published Jan 1, 2018• 0 citations
Publisher

Abstract

We demonstrate broad bandwidth single-photon upconversion of femtosecond pulses at telecom wavelength in periodically poled lithium niobate (PPLN) bulk with high conversion efficiency by pumping with a broad bandwidth laser.
DOI
10.1364/cleo_qels.2018.fw4e.1

Related papers

High-Speed Single-Photon Frequency Upconversion With Synchronous Pump Pulses

Xiaorong Gu, Yao Li, Haifeng Pan +2 more

Single-photon signals at 1.56 ¿m were converted into the visible region by sum-frequency generation, with synchronous pump pulses at 1.03 ¿m in a periodically poled lithium niobate crystal. The signal and pump sources were provided by two synchronized mode-locked fiber lasers at the operation rate of 7.88 MHz. Such a high-speed single-photon upconversion system has shown an overall detection efficiency of 10.4%. The corresponding background noise was measured to be 3.3 × 103s-1. The noise-equivalent power in this scheme was 9.93 × 10-17W/Hz1/2, which was the lowest compared to the other upconversion systems with similar pump and signal wavelengths.

IEEE Journal of Selected Topics in Quantum Electronics•Jan 1, 2009•8 citations

Quantum transduction via frequency upconversion (Invited)

Aaron P. VanDevender, Paul G. Kwiat

We describe a method for efficiently and coherently converting photons from one wavelength to another through the process of nonlinear upconversion. By using an intense 1064 nm escort laser pulse and a periodically poled lithium niobate (PPLN) crystal, we demonstrate upconversion efficiency of 99% and coherence of 95% for 1550 to 631 nm light at the single-photon level, thereby qualifying it for use in manipulation of photonic qubits. We then show how to create photons in arbitrary superpositions of different energy states, thereby enlarging the accessible Hilbert space for quantum information applications.

Journal of the Optical Society of America B•Jan 26, 2007•79 citations

High-Efficiency Broadband Near-Infrared Single-Photon Frequency Upconversion and Detection*

Jianhui Ma, Huiqin Hu, Yu Chen +3 more

We propose and demonstrate a high efficiency broadband near infrared single-photon upconversion and detection with a broadband pump laser based on sum frequency conversion in the PPLN crystal. By using a pump laser centered at 1040 nm with a spectral bandwidth of 10 nm, the signal single-photons centered at 1562 nm with a broadband bandwidth up to 7.2 nm are frequency-converted from the near infrared to the visible regime. A maximum conversion efficiency of 18.8% is achieved, while the background noise is measured to be only 1.2 × 10−3 counts/pulse. The corresponding spectral linewidth of the upconverted photons is 0.2 nm. This scheme of broadband infrared single-photon upconversion and detection provides potential solutions in infrared laser ranging, broadband infrared imaging and quantum key distribution.

Chinese Physics Letters•Mar 1, 2020•3 citations

Tunable upconversion photon detector

Rob Thew, Hugo Zbinden, Nicolas Gisin

We introduce a simple approach for a tunable upconversion detector. This scheme is relevant for both single photon detection or anywhere where low light levels at telecom wavelengths need to be detected with a high degree of temporal resolution or where high count rates are desired. A system combining a periodically poled lithium niobate waveguide for the nonlinear wavelength conversion and a low jitter silicon avalanche photodiode is used in conjunction with a tunable pump source. We report more than a tenfold increase in the detectable bandwidth using this tuning scheme.

arXiv:0807.3399•Applied Physics Letters•Aug 18, 2008•68 citations

Efficient single-photon frequency upconversion at telecommunication wavelengths with Ti-indiffused periodically-poled LiNbO 3 waveguides

Zhenda Xie, Kai-Hong Luo, Harald Herrmann +2 more

We demonstrate single-photon frequency-upconversion using a titanium-infused periodically-poled lithium niobate waveguide by L-band erbium-doped fiber amplifier pump. Internal efficiencies up to 84.4% and dark-count rate of 44kHz are achieved with narrowband filtering down to 3.5GHz.

Conference on Lasers and Electro-Optics•May 10, 2015•1 citation

New results on single-photon upconversion

Aaron P. VanDevender, Paul G. Kwiat

The process of up-conversion is shown to enable superior single-photon detectors in the infrared, compared to InGaAs and germanium Avalanche Photodiodes (APDs) (normally used for IR single photon detection). After up-converting an infrared photon to a visible one in a non-linear crystal-Periodically Poled Lithium Niobate (PPLN)-we use a silicon APD to efficiently detect the frequency up-shifted IR photon. We have demonstrated this process at the "high-intensity" level and at the single-photon level, where the up-converted state is effectively a superposition of the single photon Fock state and the vacuum state. We achieve an 80% conversion efficiency over the width of the pulse, and show that this process is coherent, a necessary ingredient for many applications.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 19, 2004•1 citation
Single-photon signals at 1.56 ¿m were converted into the visible region by sum-frequency generation, with synchronous pump pulses at 1.03 ¿m in a periodically poled lithium niobate crystal. The signal and pump sources were provided by two synchronized mode-locked fiber lasers at the operation rate of 7.88 MHz. Such a high-speed single-photon upconversion system has shown an overall detection efficiency of 10.4%. The corresponding background noise was measured to be 3.3 × 103s-1. The noise-equivalent power in this scheme was 9.93 × 10-17W/Hz1/2, which was the lowest compared to the other upconversion systems with similar pump and signal wavelengths.
We describe a method for efficiently and coherently converting photons from one wavelength to another through the process of nonlinear upconversion. By using an intense 1064 nm escort laser pulse and a periodically poled lithium niobate (PPLN) crystal, we demonstrate upconversion efficiency of 99% and coherence of 95% for 1550 to 631 nm light at the single-photon level, thereby qualifying it for use in manipulation of photonic qubits. We then show how to create photons in arbitrary superpositions of different energy states, thereby enlarging the accessible Hilbert space for quantum information applications.
We propose and demonstrate a high efficiency broadband near infrared single-photon upconversion and detection with a broadband pump laser based on sum frequency conversion in the PPLN crystal. By using a pump laser centered at 1040 nm with a spectral bandwidth of 10 nm, the signal single-photons centered at 1562 nm with a broadband bandwidth up to 7.2 nm are frequency-converted from the near infrared to the visible regime. A maximum conversion efficiency of 18.8% is achieved, while the background noise is measured to be only 1.2 × 10−3 counts/pulse. The corresponding spectral linewidth of the upconverted photons is 0.2 nm. This scheme of broadband infrared single-photon upconversion and detection provides potential solutions in infrared laser ranging, broadband infrared imaging and quantum key distribution.
We introduce a simple approach for a tunable upconversion detector. This scheme is relevant for both single photon detection or anywhere where low light levels at telecom wavelengths need to be detected with a high degree of temporal resolution or where high count rates are desired. A system combining a periodically poled lithium niobate waveguide for the nonlinear wavelength conversion and a low jitter silicon avalanche photodiode is used in conjunction with a tunable pump source. We report more than a tenfold increase in the detectable bandwidth using this tuning scheme.
The process of up-conversion is shown to enable superior single-photon detectors in the infrared, compared to InGaAs and germanium Avalanche Photodiodes (APDs) (normally used for IR single photon detection). After up-converting an infrared photon to a visible one in a non-linear crystal-Periodically Poled Lithium Niobate (PPLN)-we use a silicon APD to efficiently detect the frequency up-shifted IR photon. We have demonstrated this process at the "high-intensity" level and at the single-photon level, where the up-converted state is effectively a superposition of the single photon Fock state and the vacuum state. We achieve an 80% conversion efficiency over the width of the pulse, and show that this process is coherent, a necessary ingredient for many applications.