Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0807.3399 · Applied Physics Letters

Tunable upconversion photon detector

Rob Thew, Hugo Zbinden, Nicolas Gisin

Published Aug 18, 2008• 68 citations
arXivHTMLPDF

Abstract

We introduce a simple approach for a tunable upconversion detector. This scheme is relevant for both single photon detection or anywhere where low light levels at telecom wavelengths need to be detected with a high degree of temporal resolution or where high count rates are desired. A system combining a periodically poled lithium niobate waveguide for the nonlinear wavelength conversion and a low jitter silicon avalanche photodiode is used in conjunction with a tunable pump source. We report more than a tenfold increase in the detectable bandwidth using this tuning scheme.

DOI
10.1063/1.2969067

Related papers

Upconversion single-photon detectors based on integrated periodically poled lithium niobate waveguides [Invited]

Fei Ma, Longyue Liang, Jiu-Peng Chen +6 more

We demonstrate upconversion single-photon detectors based on integrated periodically poled lithium niobate waveguides that incorporate two mode filters and a directional coupler. The two mode filters are optimized for the fiber-waveguide coupling efficiencies for 1550 and 1950 nm, respectively, while the directional coupler plays the role of wavelength combiner, making the overall system portable and low cost. The two wavelengths pump each other in our detection system. We achieve detection efficiencies of 28% for 1550 nm and 27% for 1950 nm, respectively. This scheme provides an efficient integrated single-photon detection method for any two well-separated spectral bands in the whole low-loss range of lithium niobate waveguides.

arXiv:1902.06464•Journal of the Optical Society of America B•Aug 7, 2018•25 citations

Upconversion detection near 2 μm at the single photon level

Guo-Liang Shentu, Xiu-Xiu Xia, Qi-Chao Sun +4 more

We have demonstrated upconversion detection at the single photon level in the 2 μm spectral window using a pump wavelength near 1550 nm, a periodically poled lithium niobate (PPLN) waveguide, and a volume Bragg grating (VBG) to reduce noise. We achieve a system photon detection efficiency of 10%, with a noise count rate of 24,500 counts per second, competitive with other 2 μm single photon detection technologies. This detector has potential applications in environmental gas monitoring, life science, and classical and quantum communication.

Optics Letters•Nov 19, 2013•22 citations

Upconversion single photon detection near 2 um

Guo-Liang Shentu, Xiu-Xiu Xia, Qi-Chao Sun +4 more

We have demonstrated upconversion detection at the single photon level in the 2 um spectral window using a pump wavelength near 1550nm, a periodically poled lithium niobate (PPLN) waveguide, and a volume Bragg grating (VBG) to reduce noise. We achieve a system photon detection efficiency of 10%, with a noise count rate of 24,500 counts per second, competitive with other 2 um single photon detection technologies. This detector has potential applications in environmental gas monitoring, life science, and classical and quantum communication.

arXiv:1310.7422•Oct 28, 2013•1 citation

Single-Photon Detection at 1550 nm via Upconversion Using a Tunable Long-Wavelength Pump Source

Jason S. Pelc, Christopher R. Phillips, Carsten Langrock +5 more

We demonstrate 37% single-photon detection efficiency at 1550 nm via sum-frequency generation in a periodically poled lithium niobate waveguide, by pumping with a monolithic optical parametric oscillator tunable near 1800 nm.

Conference on Lasers and Electro-Optics•Jan 1, 2011•3 citations

New results on single-photon upconversion

Aaron P. VanDevender, Paul G. Kwiat

The process of up-conversion is shown to enable superior single-photon detectors in the infrared, compared to InGaAs and germanium Avalanche Photodiodes (APDs) (normally used for IR single photon detection). After up-converting an infrared photon to a visible one in a non-linear crystal-Periodically Poled Lithium Niobate (PPLN)-we use a silicon APD to efficiently detect the frequency up-shifted IR photon. We have demonstrated this process at the "high-intensity" level and at the single-photon level, where the up-converted state is effectively a superposition of the single photon Fock state and the vacuum state. We achieve an 80% conversion efficiency over the width of the pulse, and show that this process is coherent, a necessary ingredient for many applications.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Oct 19, 2004•1 citation

Periodically poled lithium niobate waveguide sum-frequency generator for efficient single-photon detection at communication wavelengths

Rostislav V. Roussev, Carsten Langrock, Jonathan R. Kurz +1 more

We present a device to facilitate single-photon detection at communication wavelengths based on continuous-wave sum-frequency generation with an upconversion efficiency exceeding 90%. Sum-frequency generation in a periodically poled lithium niobate waveguide is used to upconvert signal photons to the near infrared, where detection can be performed efficiently by use of silicon avalanche photodiodes.

Optics Letters•Jul 1, 2004•188 citations
We introduce a simple approach for a tunable upconversion detector. This scheme is relevant for both single photon detection or anywhere where low light levels at telecom wavelengths need to be detected with a high degree of temporal resolution or where high count rates are desired. A system combining a periodically poled lithium niobate waveguide for the nonlinear wavelength conversion and a low jitter silicon avalanche photodiode is used in conjunction with a tunable pump source. We report more than a tenfold increase in the detectable bandwidth using this tuning scheme.
We demonstrate upconversion single-photon detectors based on integrated periodically poled lithium niobate waveguides that incorporate two mode filters and a directional coupler. The two mode filters are optimized for the fiber-waveguide coupling efficiencies for 1550 and 1950 nm, respectively, while the directional coupler plays the role of wavelength combiner, making the overall system portable and low cost. The two wavelengths pump each other in our detection system. We achieve detection efficiencies of 28% for 1550 nm and 27% for 1950 nm, respectively. This scheme provides an efficient integrated single-photon detection method for any two well-separated spectral bands in the whole low-loss range of lithium niobate waveguides.
We have demonstrated upconversion detection at the single photon level in the 2 μm spectral window using a pump wavelength near 1550 nm, a periodically poled lithium niobate (PPLN) waveguide, and a volume Bragg grating (VBG) to reduce noise. We achieve a system photon detection efficiency of 10%, with a noise count rate of 24,500 counts per second, competitive with other 2 μm single photon detection technologies. This detector has potential applications in environmental gas monitoring, life science, and classical and quantum communication.
We have demonstrated upconversion detection at the single photon level in the 2 um spectral window using a pump wavelength near 1550nm, a periodically poled lithium niobate (PPLN) waveguide, and a volume Bragg grating (VBG) to reduce noise. We achieve a system photon detection efficiency of 10%, with a noise count rate of 24,500 counts per second, competitive with other 2 um single photon detection technologies. This detector has potential applications in environmental gas monitoring, life science, and classical and quantum communication.
The process of up-conversion is shown to enable superior single-photon detectors in the infrared, compared to InGaAs and germanium Avalanche Photodiodes (APDs) (normally used for IR single photon detection). After up-converting an infrared photon to a visible one in a non-linear crystal-Periodically Poled Lithium Niobate (PPLN)-we use a silicon APD to efficiently detect the frequency up-shifted IR photon. We have demonstrated this process at the "high-intensity" level and at the single-photon level, where the up-converted state is effectively a superposition of the single photon Fock state and the vacuum state. We achieve an 80% conversion efficiency over the width of the pulse, and show that this process is coherent, a necessary ingredient for many applications.