Superconducting nanowire single-photon detector enable photon detection with >80% detection efficiency, low noise and precise timing, all these features are attractive for future optical communications such as quantum information technologies and deep space communications.
Photon detectors connect optical and electrical systems by converting light to electrical signals. Single photon detectors detect single photons which measure ultra-weak light. Traditional semiconductor single-photon detectors suffer from high dark count rates, low infrared detection efficiency, and poor temporal resolution. Superconducting-nanowire single-photon detectors (SNSPDs) overcome these limitations using the hotspot effect. SNSPDs have created a solid foundation for optical technologies and become key in quantum information, LiDARs and Deep-Space Communications. This paper reviews working principles and performance metrics: system detection efficiency, dark count rate, recovery time, and timing jitter. The study summarizes applications in quantum information (quantum key distribution, optical quantum computing), single-photon LiDAR, and deep-space optical communication, replacing most single-photon avalanche diodes (SPADs). Recent experiments show that SNSPD-based systems can achieve meter-scale detection of sea fog, interplanetary laser communication over billions of kilometers, and boson sampling with 20 photons. Ongoing research is expected to improve performance in maximum count rate, system integration, and cryogenic operation, as well as to find applications in emerging fields such as environmental monitoring.
Abstract Single‐photon detectors and nanoscale superconducting devices are two major candidates for realizing quantum technologies. Superconducting‐nanowire single‐photon detectors (SNSPDs) comprise these two solid‐state and optic aspects enabling high‐rate (1.3 Gb s −1 ) quantum key distribution over long distances (>400 km), long‐range quantum communication (>1200 km), as well as space communication (239 000 miles). The attractiveness of SNSPDs stems from competitive performance in the four single‐photon relevant characteristics at wavelengths ranges from UV to the mid‐IR: high detection efficiency, low false‐signal rate, low uncertainty in photon time arrival, and fast reset time. However, to date, these characteristics cannot be optimized simultaneously. In this review, the mechanisms that govern these four characteristics are presented, and it is demonstrated how they are affected by material properties and device design as well as by the operating conditions, allowing aware optimization of SNSPDs. Based on the evolution in the existing literature and state of the art, it is proposed how to choose or design the material and device for optimizing SNSPD performance, while possible future opportunities in the SNSPD technology are also highlighted.
The important development of quantum technologies during the past decade brought the need for efficient, fast and precise single-photon detection. Superconducting Nanowire Single-Photon Detectors (SNSPDs) are currently considered as the detection method of choice when extreme performances are required. This thesis aimed at investigating this technology, with the objective of improving existing detectors for high-rate applications in quantum communication. This document presents the work and result achieved over four years dedicated to the subject. During this thesis, single-photon detection based on superconducting nanowire has been investigated, with a particular focus on specific requirements for high speed quantum communication applications. The work achieved ranges from the design and nano-fabrication of the structures, to the characterization and the understanding of the physics, detection models and fundamental limits of the devices.
In the field of quantum technologies, the superconducting nanowire single photon detector(SNSPD) is nowadays well recognized as a key enabling device. SNSPDs combine high detectionefficiency in the visible and near IR spectral ranges, timing jitter as low as 10 ps, low dark count rate(<100 s−1) and cut-off frequency above 100 MHz. These features make it particularly attractive e.g. forfundamental quantum optics experiments and quantum communications.Plug-and-play SNSPDs with fibered optical access, as shown in Figure 1, are based on a meandernanowire defined by patterning an ultrathin (<10 nm) superconducting film. The device is designedso that absorption of a single photon is enough to brake locally the superconducting order, and toinduce a measurable change of the wire’s resistance. Until recently, such devices displayed two mainlimitations: (1) their efficiency did not exceed ~40% due to the limited optical absorption of the thinfilm; and (2) their response was strongly polarization-sensitive, due to the optical anisotropy of thenanowire. I will present two different approaches which enable to get very high (>90% [1]) andpolarization-insensitive [2,3] detection efficiency. We consider designs based on the integration of thenanowire within an optical microcavity (compatible with the plug-and-play configuration) or on topof an optical waveguide (preferred approach for integration in photonic circuits). I will finally discussnovel application prospects of such detectors, with emphasis on photon-number resolution.
Superconducting Nanowire Single Photon Detectors (SNSPDs) are the most advanced detectors available for time-resolved single photon counting from the UV to the mid-infrared. We will discuss recent progress in SNSPD development for the ground terminal in NASA’s Deep Space Optical Communication (DSOC) project as well as recent performance advances in other metrics, including the development of kilopixel SNSPD arrays, single-photon sensitivity at mid-infrared wavelengths as long as 10 microns, and SNSPDs with sub-3ps timing jitter. I will discuss a range of new potential scientific applications for SNSPDs, including exoplanet transit spectroscopy, dark matter detection, fluorescence lifetime imaging microscopy, and quantum information science.
In this review, we present recent advances relating to superconducting nanowire single-photon detectors (SSPDs or SNSPDs) and their broad range of applications. During a period exceeding ten years, the system performance of SSPDs has been drastically improved, and lately excellent detection efficiencies have been realized in practical systems for a wide range of target photon wavelengths. Owing to their advantages such as high system detection efficiency, low dark count rate, and excellent timing jitter, SSPDs have found application in various research fields such as quantum information, quantum optics, optical communication, and also in the life sciences. We summarize the photon detection principle and the current performance status of practical SSPD systems. In addition, we introduce application examples in which SSPDs have been applied.