Field-programmable gate arrays (FPGAs) provide a significantly cheaper solution for various applications in traditional semiconductor electronics. Single flux quantum (SFQ) technologies are developing rapidly and the availability of SFQ-specific FPGA will be very useful. Towards developing such an SFQ-specific FPGA, new designs of FPGA subcircuits for both synchronous and asynchronous operation of SFQ circuits are presented in this paper. Magnetic Josephson junctions (MJJs) are used as bias limiting junctions in energy-efficient rapid SFQ (ERSFQ) biasing to implement programmable switches in various subcircuits of the proposed FPGA fabric. Designs of all FPGA subcircuits are developed and are verified through circuit simulation. Verilog hardware description language (HDL) models are also developed for all FPGA circuit blocks to facilitate large-scale FPGA simulations for the implementation of the desired circuit on the proposed FPGA fabric. Designs of a few subcircuits with switches based on nondestructive readout cell are also given in the current paper for better comparison with MJJ switch based counterparts. Programming of MJJ-based switches is based on the ability to control the critical current of MJJs externally. Recent implementations of SFQ decoder is proposed for accessing individual MJJs through the current lines in a crossbar structure. Estimations for the area and power consumption are much better in comparison to previous attempts at designing an SFQ specific FPGA.
Field-programmable gate arrays (FPGAs) provide a significantly cheaper solution for various applications in traditional semiconductor electronics. Single flux quantum (SFQ) technologies are developing rapidly and the availability of SFQ-specific FPGA will be very useful. Towards developing such an SFQ-specific FPGA, new designs of FPGA subcircuits for both synchronous and asynchronous operation of SFQ circuits are presented in this paper. Magnetic Josephson junctions (MJJs) are used as bias limiting junctions in energy-efficient rapid SFQ (ERSFQ) biasing to implement programmable switches in various subcircuits of the proposed FPGA fabric. Designs of all FPGA subcircuits are developed and are verified through circuit simulation. Verilog hardware description language (HDL) models are also developed for all FPGA circuit blocks to facilitate large-scale FPGA simulations for the implementation of the desired circuit on the proposed FPGA fabric. Designs of a few subcircuits with switches based on nondestructive readout cell are also given in the current paper for better comparison with MJJ switch based counterparts. Programming of MJJ-based switches is based on the ability to control the critical current of MJJs externally. Recent implementations of SFQ decoder is proposed for accessing individual MJJs through the current lines in a crossbar structure. Estimations for the area and power consumption are much better in comparison to previous attempts at designing an SFQ specific FPGA.
Field Programmable gate arrays (FPGAs) are one of the most successful circuits in the semiconductor industry. In the absence of a reliable three-terminal switch like MOSFET for rapid single flux quantum(RSFQ) technology, it was difficult to implement FPGA like reconfiguralbe circuits. However, a recently proposed superconducting magnetic FPGA (SMFPGA) implements a controllable switch by controlling the critical current of magnetic Josephson Junctions (MJJs) placed in energy-efficient RSFQ bias network. For implementing a configurable logic block (CLB) with a smaller area for the said FPGA, we designed a reconfigurable gate that can implement four basic logical functions: AND, OR, XOR and NOT. The programmability to implement the four functions is achieved by introducing MJJs in the circuit at specific locations and programming their critical current. The gate is made reconfigurable by having the ability to change both the bias current at different ports and the critical current of a JJ in the gate to two different values. This makes the size of CLB ten times smaller compared to the earlier design and simplifies the SMFPGA. We describe the design methodology and the simulation results of the reconfigurable gate.
Recent advances in fabrication complexity and density-especially for the Institute of Advanced Industrial Science and Technology (AIST) advanced process 2 (ADP2) process and the MIT Lincoln Lab (MITLL) SFQ5ee process and beyond-allow the implementation of a superconducting field-programmable gate array (SFPGA) with sufficient complexity to host a number of different programmed functions. We discuss design choices for an all single flux quantum SFPGA targeting these modern processes, making heavy use of passive transmission line (PTL) layers they provide. Various configurations for lookup tables, basic logic elements and timing schemes are shown, and a viable switch block implementation is discussed. Academic FPGA electronic design automation (EDA) tools are repurposed for mapping Verilog hardware description language (HDL) functions to the chosen SFPGA design, whilst HDL and electrical simulations are used to show its correct operation. We show simulations for programming and the operation of an SFPGA, and discuss die size requirements for practical implementation.
Energy-efficient rapid single flux quantum (ERSFQ) circuits have become a viable alternative for the implementation of superconducting circuits due to a large amount of static power consumption in RSFQ circuits. ERSFQ circuits are built upon the popular RSFQ logic circuits by replacing the power-dissipating resistor bias network with a bias network consisting of active devices. In this paper, a simulation study of ERSFQ biasing scheme is carried out by building simulation test benches for both synchronous and asynchronous ERSFQ circuits. A study is carried out to present the optimum value of biasing inductance, influence of the feeding Josephson transmission line (FJTL) and the effect of its size, the effect of the feeding clock frequency, and the effect of the circuit operating frequency. An innovative clock-choking mechanism using magnetic Josephson junctions is also proposed for the FJTL in the case of no logic circuit activity for a current-recycling circuit block, which would help in eliminating the dynamic power consumed due to the switching of bias junctions in a logic circuit. Simulation results for current recycling ERSFQ circuits are presented along with a strategy for implementing large superconducting circuits.
Adiabatic quantum-flux-parametron (AQFP) logic is a promising technology for future energy-efficient, high- performance information processing systems because it has significantly low power consumption due to the adiabatic switching of Josephson junctions. We are developing a high-performance field-programmable gate array (FPGA) using superconducting AQFP circuits to reduce its energy consumption. The all-AQFP FPGA consists of logic blocks, switch blocks, connection blocks, and memory using AQFP circuits. In particular, the memory is composed of AQFP buffer chains, enabling high-density and low-power memory. The switch blocks can perform data routing as well as several logic functions, including majority,and, andorfunctions, which increases the design flexibility of the all-AQFP FPGA. We fabricated a one-unit all-AQFP FPGA and demonstrated its reconfigurable operation at low speed. It was found that much lower power consumption can be achieved in the new FPGA than in the other superconducting FPGAs.
Field-programmable gate arrays (FPGAs) allow circuit reconfiguration in the field, which adds to the flexibility of electronic systems. Applied to superconductive electronics, reprogrammability allows system functionality to be changed without remanufacturing the circuit or dismantling a cryogenic setup. We discuss the design issues relevant to a superconducting programmable gate array (SPGA), and report an elementary 4200-junction SPGA. The SPGA is built around interconnected 2-input logic blocks which contain 4-bit lookup tables. Designs for the programming frame, address decoding, lookup tables and switch implementations are discussed, together with design constraints imposed by the unidirectional nature and large size of single flux quantum (SFQ) transmission lines.
The lack of dense, fast, energy efficient memory has been the main detractor for multiple superconducting digital projects in the past. Recently, fundamental physics research in superconductor-ferromagnet thin-film tunnel structures created a new opportunity to solve this long-standing problem. Superconductivity and ferromagnetism, two deeply antagonistic electronic properties, can co-exist in form of Magnetic Josephson Junctions (MJJs). The superconducting-ferromagnetic MJJs are electrically compatible with traditional superconductor-insulator-superconductor (SIS) Josephson junctions (JJs) used for digital energy-efficient single flux quantum (eSFQ/ERSFQ) circuits. Both MJJ and JJ circuits have similar fabrication process and can be integrated on a single chip. As a result, a combination of MJJs and JJs can be used to form addressable memory cells, energy-efficient memory periphery circuits and programmable logic elements. In this paper, we present the test results of superconductor-insulator-ferromagnet-superconductor (SIFS) MJJs showing their applicability for superconducting spintronic memory and digital circuits.