Superconducting single photon detectors are promising candidates for cutting-edge applications like space-to-ground communication and quantum-key-distribution. The challenge is to transfer the assembly technology from university research to industrial processes. Especially the positioning of the optical fiber with respect to the active area of the superconducting detector are open questions. We demonstrate the operation of a superconducting nanowire single photon detector (SNSPD) in a closed cycle cryostat. The thermal coupling between superconducting detector chip and closed-cycle cryostat is investigated. The possibility to mount the optical fiber in an RIE-ICP-etched hole in a silicon carrier wafer is demonstrated. Different illumination wavelength and intensities are used to validate the SNSPD assembly in the closed cycle cryostat. Further, an advanced package of the silicon carrier wafer and the SNSPD-chip is introduced. In this package, the SNSPD-chip is mounted via flip-chip technology on the silicon carrier wafer. The striven flip-chip position accuracy of ± 1 μm ensures the accurate coupling between optical fiber and active area of the SNSPD.
Superconducting single photon detectors are promising candidates for cutting-edge applications like space-to-ground communication and quantum-key-distribution. The challenge is to transfer the assembly technology from university research to industrial processes. Especially the positioning of the optical fiber with respect to the active area of the superconducting detector are open questions. We demonstrate the operation of a superconducting nanowire single photon detector (SNSPD) in a closed cycle cryostat. The thermal coupling between superconducting detector chip and closed-cycle cryostat is investigated. The possibility to mount the optical fiber in an RIE-ICP-etched hole in a silicon carrier wafer is demonstrated. Different illumination wavelength and intensities are used to validate the SNSPD assembly in the closed cycle cryostat. Further, an advanced package of the silicon carrier wafer and the SNSPD-chip is introduced. In this package, the SNSPD-chip is mounted via flip-chip technology on the silicon carrier wafer. The striven flip-chip position accuracy of ± 1 μm ensures the accurate coupling between optical fiber and active area of the SNSPD.
We report on the development of fiber-coupled 4-element superconducting nanowire single photon detector arrays. The SNSPD arrays consist of four nanowire elements which are placed into a sensitive area with 15 ¥ 15 μm2square. The device was mounted into small chip-mounting block with four tiny connectors which can pass high frequency signals up to 110 GHz, and each element was connected to each connector through CPW line. The single-mode optical fiber with GRIN lens was fixed to fiber-holding block and was joined to chip-mounting block from back side and aligned accurately so that the light spot irradiate to the center of device sensitive area. The fiber coupled package is then installed into closed-cycle cryocooler system and cooled down to 2.3 K. All four elements were able to detect single photon event, and total system DE reached to 8.07%.
This paper describes the construction of a cryostat and an optical system with a free-space coupling efficiency of 56.5% ± 3.4% to a superconducting nanowire single-photon detector (SNSPD) for infrared quantum communication and spectrum analysis. A 1K pot decreases the base temperature to T = 1.7 K from the 2.9 K reached by the cold head cooled by a pulse-tube cryocooler. The minimum spot size coupled to the detector chip was 6.6 ± 0.11 µm starting from a fiber source at wavelength, λ = 1.55 µm. We demonstrated photon counting on a detector with an 8 × 7.3 µm2 area. We measured a dark count rate of 95 ± 3.35 kcps and a system detection efficiency of 1.64% ± 0.13%. We explain the key steps that are required to improve further the coupling efficiency.
In order to investigate the characteristics of the package and fiber coupling of a Superconducting Nanowire Single-photon Detector(SNSPD),the SNSPD was successfully built up in our laboratory.Experiments show that the quantum efficiencies of the detector under different light wavelengths are 6%@1310nm and 3%@1550nm when the dark count rate is 100 Hz.Then,as the distance(gap) between SNSPD and optical fiber would be changed due to the thermal stress during cooling,and would cause a misalignment,two kinds of fiber coupling methods to modulate the gap at room temperature were proposed.Finally,by altering the wavelength of the input light,the exact values of the gap at different temperatures were measured and then the influence of temperature on the gap were figured out by an experiment.The experimental results indicate that decreases of the gap for the two packages are 4.1 μm and 17 μm when the temperature dereases 270 K.Based on the analysis of package material and structure,the gaps at both room and low temperature were calculated theoretically.The result fits well with that of the experiments and it may offer some references to the design of new package and fiber coupling in the future.
Superconducting Nanowire Single Photon Detectors (SNSPD) have set leading performance benchmarks in terms of detection efficiency, low noise operation, speed, and timing accuracy. Besides scaling up the numbers of individually addressable nanowire detector channels, integration with nanophotonic functionalities as well as optical and electrical multiplexing will be key to advance single photon counting applications, such as quantum key distribution, optical quantum information processing and simulations of sampling problems. Here we show how integration of SNSPDs with nanophotonic circuit components gives rise to novel use cases. We combine highperformance waveguide-integrated SNSPDs with nano-electromechanical phase-shifters, high speed electro-optic modulators, sub-wavelength grating structures, directional coupler networks, on-chip delay lines and highly efficient and broadband 3D-interconnects to optical fibers, achieving crucial active and passive functionalities for integrated quantum photonics. We showcase the capabilities and practical relevance of photonic integrated SNSPD solutions for the example of high-rate quantum key distribution receivers.
Superconducting nanowire single photon detector (SNSPD) has been widely used in quantum communication, quantum computing and other fields because of its excellent timing jitter and response speed. However, due to the mutual restraint of the technical parameters of SNSPD nanowires, there are technical challenges to further improve the comprehensive performance of SNSPD, and thus limiting its application on a large scale. Combining high detection efficiency with high timing performance is still an outstanding challenge. In this work, we report the SNSPD with 12-μm small active area, which has high speed, high efficiency, low jitter and broadband absorption. Au/SiO2 membrane cavity, which is determined by finite element analysis simulation, is used to widen the optical response bandwidth. And it is easier to process and improve the alignment accuracy at the same time. The flat substrate is more conducive to the growth of superconducting thin films, so flattening process is introduced. Device package is also optimized to match smaller detector. Self-aligned packaging makes optical alignment more convenient and time-saving. Special optical fibers with small mode-field diameters can reduce the negative effect of the detector on optical coupling. The detector can achieve a maximum SDE of 82% at the central wavelength of 1310 nm and the temperature of 2.2 K, and the SDE of more than 65% in the wavelength range of 1200–1600 nm, with DCR of 70 cps. The detector also exhibits a count rate of 40 MHz@3 dB and a timing jitter of 38 ps, which is significantly improved compared with 23-μm active area detector. Furthermore, the minimum timing jitter of 22 ps can be obtained by using cryogenic amplifier readout. In this work, high comprehensive performance detector is developed, which provides an important technical reference for practical and product SNSPD.
Superconducting nanowire single photon detectors (SNSPDs) are a rapidly maturing detector technology that offer superior performance relative to competing infrared photon counting technologies. The original experimental work presented here explores three novel methods of improving and analysing detector characteristics, employing low-temperature piezoelectric motors at temperatures below 4 K in a closed-cycle cryostat. Utilizing the low-temperature piezoelectric nanopositioners in tandem with a miniature confocal microscope, this work specifically shows a spatially-separable parallel-wire SNSPD demonstrating one- and two-pixel photon discrimination, with the detector responding more quickly when triggering two pixels. The work demonstrates nanoantenna-coupled SNSPDs, which are simulated, designed, and tested using the same nano-optical setup. In these an increased local absorption into the nanowire is seen at the antennas' resonant wavelengths, enhancing the efficiency of the detector by up to 130 %. Finally, a modified optical setup using a distributed Bragg reflector fibre in place of the microscope to form a tunable cavity around two configurations of SNSPD is demonstrated, improving absorption of the incident light into the nanowire across the whole active area. For these, enhancement in the system detection efficiency of up to 40 % is seen.