This thesis is concerned with employing the statistics of charge transfer in a conductor as a tool for quantum measurement. The physical systems studied are electronic devices made by nanoscale manufacturing techniques. In this context quantum measurement appears not as a postulate, but as physical process. In this thesis I am considering a quantum system, in particular a qubit or a nanomechanical resonator, interacting with a tunnel junction. The effect of coupling a quantum system to a tunnel junction is twofold: The state of the quantum system will be changed and there will be information about the quantum system in the statistics of charge transfer of the tunnel junction. As the first example a quantum measurement process of a qubit is considered. A common description of the system and charge dynamics is found by introducing a new quantity, the charge specific density matrix. By deriving and solving a Markovian master equation for this quantity the measurement process is analyzed. The measurement is shown to be a dynamical process, where correlations between the initial state of the qubit and the number of charges transferred in the tunnel junction arise on a typical timescale, the measurement time. As another example of a quantum system a nanomechanical oscillator is considered. It is found, that the biased tunnel junction, acting as a non-equilibrium environment to the oscillator, increases the temperature of the oscillator from its thermal equilibrium value. The current in the junction is modulated by the interaction with the oscillator, but the influence vanishes for bias voltages smaller than the oscillator frequency. For an asymmetric junction and non-vanishing oscillator momentum a current is shown to flow through the junction even at zero bias. The current noise spectrum induced by the oscillator in the tunnel junction consists of a noise floor and a peaked structure with peaks at zero frequency, the oscillator frequency and double the oscillator frequency. The peak heights are dependent on the coupling strength between oscillator and junction, the occupation number of the oscillator, the bias voltage and the junction temperature. I show how the peak height can be used as a measure of the oscillator temperature, demonstrating that the noise of a tunnel junction can be used for electronic thermometry of a nanomechanical oscillator.
This thesis is concerned with employing the statistics of charge transfer in a conductor as a tool for quantum measurement. The physical systems studied are electronic devices made by nanoscale manufacturing techniques. In this context quantum measurement appears not as a postulate, but as physical process. In this thesis I am considering a quantum system, in particular a qubit or a nanomechanical resonator, interacting with a tunnel junction. The effect of coupling a quantum system to a tunnel junction is twofold: The state of the quantum system will be changed and there will be information about the quantum system in the statistics of charge transfer of the tunnel junction. As the first example a quantum measurement process of a qubit is considered. A common description of the system and charge dynamics is found by introducing a new quantity, the charge specific density matrix. By deriving and solving a Markovian master equation for this quantity the measurement process is analyzed. The measurement is shown to be a dynamical process, where correlations between the initial state of the qubit and the number of charges transferred in the tunnel junction arise on a typical timescale, the measurement time. As another example of a quantum system a nanomechanical oscillator is considered. It is found, that the biased tunnel junction, acting as a non-equilibrium environment to the oscillator, increases the temperature of the oscillator from its thermal equilibrium value. The current in the junction is modulated by the interaction with the oscillator, but the influence vanishes for bias voltages smaller than the oscillator frequency. For an asymmetric junction and non-vanishing oscillator momentum a current is shown to flow through the junction even at zero bias. The current noise spectrum induced by the oscillator in the tunnel junction consists of a noise floor and a peaked structure with peaks at zero frequency, the oscillator frequency and double the oscillator frequency. The peak heights are dependent on the coupling strength between oscillator and junction, the occupation number of the oscillator, the bias voltage and the junction temperature. I show how the peak height can be used as a measure of the oscillator temperature, demonstrating that the noise of a tunnel junction can be used for electronic thermometry of a nanomechanical oscillator.
This thesis examines Josephson tunnel junctions as candidate qubits for quantum computation. A large area current-biased junction, known as a phase qubit, uses the two lowest energy levels in a tilted washboard potential as the qubit states |0> and |1>. I performed experiments with 10 x 10 um^2 Nb/AlOx/Nb qubit junctions, with critical currents of roughly 30 uA. The state of a device was initialized by cooling below 50 mK in a dilution refrigerator. In order for quantum mechanical superpositions to be long-lived, it is necessary to isolate the junction from noisy bias leads that originate at room temperature. I studied two types of isolation: an LC filter, and a broadband scheme that used an auxiliary junction, resulting in a dc SQUID. One of the main goals of this work was to determine how well a simple Hamiltonian, derived assuming just a few lumped elements, describes the observed behavior of a macroscopic Josephson device, including coherent dynamics such as Rabi oscillations. I did this by comparing results to the expected behavior of ideal two-level systems and with more detailed master equation and density matrix simulations. I performed state manipulation by applying dc bias currents and resonant microwave currents, and through temperature control. The tunneling escape rate of the junction from the states |0> and |1> (zero voltage) to the running state (finite voltage) depends on the occupation probability of the energy levels and served as state readout. Experiments to measure the relaxation time T1 between |1> and |0> were performed by examining the dependence of the escape rate with temperature, yielding a maximum T1 = 15 ns. Measuring the decay to the ground state after applying a microwave pulse revealed at least two time constants, one of about 10 ns and another as long as 50 ns. The spectroscopic coherence time T2* was estimated to be roughly 5 ns by measuring resonance widths and the decay envelope of coherent Rabi oscillations was found to have a time constant T' = 10 ns over a wide range of conditions.
A model of an electrical tunnel junction coupled to a mechanical system (oscillator) is studied to simulate the dephasing effect of measurement on a quantum system. The problem is solved at zero temperature under conditions of strong nonequilibrium in the measurement apparatus. For linear coupling between the oscillator and tunneling electrons, it is found that the oscillator dynamics becomes damped, with the effective temperature determined by the voltage drop across the junction. It is demonstrated that both the quantum heating and the quantum damping of the oscillator manifest themselves in the current-voltage characteristic of the tunnel junction.
This Thesis studies opportunities to create a quantum standard for the electric current with the help of tunnel junctions. We use two types of tunnel junctions: superconducting Josephson junctions, and NIS junctions where one of the electrodes is normal (N) and the other one superconducting (S). In both cases, tunnel junctions are employed in a single-electron transistor (SET) structure, which is used to transfer a controlled number k of electrons (e) with the repetition frequency f. The magnitude of the resulting current is thus I = kef. First, we study the Cooper pair sluice, where Josephson junctions are connected as two superconducting quantum interference devices (SQUID). A gate electrode is used to control the charge state of the superconducting island formed between the SQUIDs. The sluice is based on tuning the tunneling rates through the SQUIDs with local magnetic fluxes, which allows to control the direction of the charge transfer. Weak traces of current quantization can be observed up to above 1 nA, which is large enough current for many metrological purposes. However, the accuracy of the current is still far from what is required in metrology. We study also a new type of SQUID structure, the balanced SQUID, which could be used to improve the accuracy of the sluice or in, e.g., some quantum computing applications. Second, we employ NIS junctions in the hybrid (SINIS) single-electron transistor with superconducting leads and a normal-metal island. This structure can be used as the SINIS turnstile which lets electrons to flow one by one in the direction determined by the bias voltage. We report the first experimental results on the SINIS turnstile and two methods to improve the accuracy of the current: increasing the charging energy of the island or connecting the turnstile in a resistive environment. We also show that the SINIS turnstile can be used as an electronic radio-frequency refrigerator where tunneling processes cool the electron temperature of the normal-metal island.
This thesis addresses two different topics related to the physics of nanoscale systems. The first topic concerns quantum correlations and entanglement between electrons in solid-state systems, with a focus on how to generate electronic orbital entanglement on a sub-decoherence time scale and how to achieve experimentally more feasible entanglement detection schemes. The second topic concerns heat transport and temperature fluctuations in nanoscale systems, with a focus on how to utilize temperature fluctuations for calorimetric detection of single particles. The thesis comprises five papers.In Paper I, we propose a quantum dot system to generate and detect, using cotunneling processes, orbitally entangled pairs of electrons on a sub-decoherence time scale.In Paper II, we investigate, by applying an entanglement witness, the minimal number of zero-frequency current cross-correlation measurements needed to detect bipartite entanglement between two flying qubits.In Paper III, we consider energy and temperature fluctuations, and the influence of charging effects, in a metallic island tunnel coupled to a normal metallic lead, the so-called single electron box.In Paper IV, we investigate nanoscale quantum calorimetry and propose a setup consisting of a metallic island and a superconducting lead to realize a nanoscale calorimeter that may probe the energies of tunneling electrons.In Paper V, we investigate photon transport statistics of a microwave cavity, including the short-time statistics of single photon emissions and the long-time statistics of heat transport through the cavity.
We consider a biased quantum point contact between two Luttinger liquids measuring a quantum-mechanical system (oscillator). There are three main physical results. First, we find that for voltages higher than the oscillator level spacing, the effect of the measurement is equivalent to coupling to a heat bath, with an effective temperature that only depends on the device $I\ensuremath{-}V$ characteristic. Second, we find that this heating changes the $I\ensuremath{-}V$ characteristics on the junction. Finally, we predict a modulation of the tunneling current at the oscillator frequency. Also, we find that a generalized nonequilibrium fluctuation-dissipation relation connects the decoherence and dissipation of the oscillator to the current-voltage characteristics of the device.
This work concerns the study of Josephson junction circuits in the context of their usability for quantum computing. The zero-voltage state of a current-biased Josephson junction has a set of metastable quantum energy levels. If a junction is well isolated from its environment, it will be possible to use the two lowest states as a qubit in a quantum computer. I first examine the meaning of isolation theoretically. Using a master equation, I analyzed the effect of dissipation on escape rates and suggested a simple method, population depletion technique, to measure the relaxation time. Using a stochastic Bloch equation to analyze microwave resonance shapes, I found a relation between current noise induced decoherence and the noise spectrum. I then analyze and test a few qubit isolation schemes, including resistive isolation, inductor-capacitor (LC) isolation, and inductor-junction (LJ) isolation. I found the resistive isolation scheme has a severe heating problem. Macroscopic quantum tunneling and energy level quantization were observed in the LC isolated junction qubits at 25 mK. Relaxation times of 4-12 ns and spectroscopic coherence times of 1-3 ns were obtained for these LC isolated qubits. I measured a relaxation time of 50 ns and a spectroscopic coherence time of 5-8 ns for the LJ isolated junction qubit. Both times are much longer than those of the LC isolated qubits. Rabi oscillations were also observed on this sample with a decay time of around 10 ns. Using microwave spectroscopy techniques, I probed quantum phenomena in a coupled macroscopic three-qubit system that is comprised of two Nb/AlOx/Nb Josephson junctions and an LC resonator. The measured spectrum at 25 mK in the frequency range 4-15 GHz agrees well with quantum mechanical calculations, consistent with the existence of entangled states between the three degrees of freedom. These entangled states and a first-order strong coupling between two junction qubits open the possibility of using a resonator as a data bus for information storage and manipulation in a multi-qubit system. The measurements also demonstrate spectroscopy is a powerful tool and can be used to study a composite system with many qubits.